Introduzione
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Twin Over Twin Bunk Bed. Designed for space-saving and functionality, this wooden bunk bed features built-in shelves and a convenient storage drawer. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Informazioni sulla sicurezza
Il rispetto di queste linee guida di sicurezza è fondamentale per prevenire infortuni e garantire la longevità del vostro letto a castello.
- Seguire sempre attentamente le istruzioni di montaggio. Non discostarsi dai passaggi indicati.
- Ensure all connections are securely tightened before use. Periodically check and re-tighten hardware.
- Il letto a castello superiore non è adatto a bambini di età inferiore a 6 anni.
- Use only mattresses that meet the recommended thickness: Upper Bed: 6 inches; Lower Bed: 8-10 inches.
- Maximum weight capacity for each bed is 400 lbs. Do not exceed this limit.
- Utilizzare sempre la scaletta per accedere al letto superiore. Non saltare né salire né scendere dal letto.
- Ensure guardrails are properly installed and maintained on the upper bunk.
- Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed, e.g., but not limited to, hooks, belts, ropes, or chains.
- Keep children away from the assembly area until assembly is complete.
Contenuto della confezione
Verify that all components are present before beginning assembly. This product typically ships in two packages.
| Componente | Quantità | Descrizione |
|---|---|---|
| Bed Frames (Upper & Lower) | 1 set | Main structural components of the bunk bed. |
| Doghe | 14 pcs per bed (28 total) | Support for mattresses. |
| Built-in Shelves | Integrato | Three-in-one storage shelves beside both upper and lower beds. |
| Cassetto portaoggetti | 1 | Large drawer located underneath the bed. |
| Scala | 1 | 4-step ladder for upper bunk access. |
| Parapetti | Integrato | Full-length guardrails for the upper bunk. |
| Pacchetto hardware | 1 | Screws, bolts, nuts, and tools required for assembly. |
Installazione e assemblaggio
Assembly requires two adults and approximately 4 hours. Ensure you have ample space and all tools provided or required (e.g., screwdriver).
- Disimballare e identificare le parti: Carefully unpack all components and lay them out on a clean, soft surface (e.g., carpet) to prevent scratches. Identify each part using the provided parts list.
- Montare le estremità del letto: Begin by assembling the headboards and footboards for both the upper and lower beds. Secure all connections loosely at first.
- Fissare le guide laterali: Connect the side rails to the assembled bed ends for both the upper and lower bunks. Ensure the shelf components are integrated as per the diagrams.
- Installare le doghe: Place and secure the wooden slats onto the support rails for both the upper and lower beds. Each slat typically requires two screws. It is recommended to pre-drill if holes are not fully present, or to align carefully before tightening.
- Assemblaggio del cassetto portaoggetti: Follow the instructions to assemble the storage drawer. Ensure the wheels or glides are correctly installed for smooth operation.
- Fissare la scala e i parapetti: Securely attach the ladder to the designated side of the bunk bed. Ensure all guardrails for the upper bunk are firmly in place.
- Serraggio finale: Una volta posizionati tutti i componenti, serrare sistematicamente tutte le viti e i bulloni. Non serrare eccessivamente.

Figure 1: Fully assembled Polibi Twin Over Twin Bunk Bed, showcasing the built-in shelves and the pull-out storage drawer.

Figure 2: Detailed dimensions of the Polibi Twin Over Twin Bunk Bed, including overall length, width, height, and internal measurements for mattress placement and shelf depths.

Figure 3: Illustration highlighting key features such as the two sets of three-in-one storage shelves, the large storage drawer, and the number of slats per bed.
Istruzioni per l'uso
Using your Polibi bunk bed effectively and safely.
- Posizionamento del materasso: Place a 6-inch thick mattress on the upper bunk and an 8-10 inch thick mattress on the lower bunk. Ensure mattresses fit snugly within the frame.
- Utilizzo della scala: Always use the integrated 4-step ladder to access the upper bunk. Ensure a firm grip and stable footing.
- Cassetto portaoggetti: The large storage drawer underneath the bed can be used for linens, toys, or other personal items. Pull out gently to open and push in firmly to close.
- Built-in Shelves: Utilize the three-in-one storage shelves for books, small decor items, or personal necessities. Avoid placing heavy or fragile items that could fall.
Manutenzione
Una cura adeguata prolungherà la durata e l'aspetto del tuo letto a castello.
- Pulizia: Pulire le superfici con un panno morbido, damp panno. Evitare prodotti chimici aggressivi o detergenti abrasivi che potrebbero danneggiare la finitura.
- Controllo hardware: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Re-tighten any loose hardware to maintain structural integrity.
- Cura del legno: Protect the wood finish from direct sunlight and extreme temperature changes to prevent warping or cracking.
- Manutenzione del cassetto: Mantenere le guide dei cassetti pulite e libere da detriti per garantire un funzionamento regolare.
Risoluzione dei problemi
Problemi comuni e relative soluzioni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il letto sembra traballante o instabile. | Hardware sciolto. | Controllare e serrare tutti i bulloni e le viti. Assicurarsi che tutti i collegamenti siano ben saldi. |
| Il cassetto non scorre agevolmente. | Detriti nei binari; cassetto disallineato. | Clean tracks of any dust or obstructions. Re-check drawer assembly and alignment. |
| Le parti non si allineano durante il montaggio. | Incorrect orientation of parts; pre-drilled holes not fully open. | Review the assembly diagrams carefully to ensure correct part orientation. If holes are not fully drilled, gently clear them. Do not fully tighten screws until all parts are aligned. |
| Hardware mancante o parti danneggiate. | Danni durante la spedizione o errori di imballaggio. | Contact Polibi customer support with your purchase details for replacement parts. |
Specifiche
- Modello: Twin Bunk w/Shelves White
- Marca: polibi
- Dimensioni del prodotto (L x P x A): 78.3 pollici x 48.7 pollici x 68.9 pollici
- Materiale: Legna
- Colore: Bianco
- Caratteristiche speciali: Built-in Shelves, Storage Drawer
- Weight Capacity (Each Bed): 400 libbre
- Spessore consigliato del materasso: Upper Bed: 6 inches; Lower Bed: 8-10 inches
- Assemblaggio richiesto: SÌ
- Codice UPC: 196986194151
- ASIN: B0CVDRKTS8
- Paese di origine: Vietnam
Garanzia e supporto
For warranty information, replacement parts, or technical support, please contact Polibi customer service. Keep your purchase receipt and model information handy for faster service.
In genere è possibile trovare i dettagli di contatto dell'assistenza sul sito ufficiale del produttore websito o tramite il tuo punto vendita.





