1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mounts, models PIMF4 and PILF12. Please read this manual thoroughly before installation to ensure safe and correct usage.
These mounts are designed to securely hold flat or curved screen televisions within specified size and weight limits, offering flexible viewangoli di inclinazione.
2. Informazioni sulla sicurezza
ATTENZIONE: la mancata lettura e osservanza delle presenti istruzioni può causare gravi lesioni personali, danni alla proprietà o l'annullamento della garanzia.
- Do not install on drywall alone. Mount must be secured to wood studs, solid concrete, or brick walls.
- Assicurarsi che la struttura della parete possa sostenere in modo sicuro il peso combinato del supporto e del televisore.
- In caso di dubbi sulla procedura, rivolgersi sempre a un professionista qualificato per l'installazione.
- Do not exceed the maximum weight capacity specified for each model.
- Verify your TV's VESA pattern before installation.
- Tenere lontani bambini e animali domestici durante l'installazione.
- Controllare periodicamente tutti i collegamenti e gli elementi di fissaggio per assicurarsi che siano sempre saldi.
3. Contenuto della confezione
Please check that all components are present and undamaged. If any parts are missing or damaged, contact Pipishell customer support.
Figura 3.1: Oltreview of Pipishell PIMF4 and PILF12 mounts and accessories.
Il contenuto tipico della confezione include:
- Wall Plate Assembly (PIMF4 or PILF12)
- Staffe TV (sinistra e destra)
- Kit di montaggio (viti varie, rondelle, distanziali per TV e parete)
- Livella a bolla d'aria
- Fascette per cavi
- Manuale di istruzioni
4. Specifiche
4.1 Model PIMF4
Figure 4.1.1: Pipishell PIMF4 TV Wall Mount.
- Dimensioni TV compatibili: 26-65 pollici
- Capacità di peso: Fino a 99 libbre (45 kg)
- Compatibilità VESA: da 100x100mm a 400x400mm
- Compatibilità con il tipo di parete: 12" or 16" wood studs, solid concrete, brick walls (Do not mount on drywall alone)
- Girevole: +/-45°
- Inclinazione: +5°/-15°
- Regolazione del livellamento: +/-3° (dopo l'installazione)
- Estensione dal muro: Da 3.7" (retratto) a 16.42" (esteso)
- Materiale: Metallo
Figure 4.1.2: PIMF4 Compatibility Overview.
Figure 4.1.3: PIMF4 Swivel Functionality.
Figure 4.1.4: PIMF4 Extension, Tilt, and Level Adjustments.
4.2 Model PILF12
Figure 4.2.1: Pipishell PILF12 TV Wall Mount.
- Dimensioni TV compatibili: 42-85 pollici
- Capacità di peso: Fino a 132 libbre (60 kg)
- Compatibilità VESA: da 200x100mm a 600x400mm
- Compatibilità con il tipo di parete: 8", 12", or 16" wood studs, solid concrete, brick walls (Do not mount on drywall alone)
- Girevole: +/-45°
- Inclinazione: +5°/-15° (tool-free)
- Estensione dal muro: Da 2.79" (retratto) a 16.54" (esteso)
- Materiale: Metallo
Figure 4.2.2: PILF12 Weight Capacity and UL Listing.
Figure 4.2.3: PILF12 Extension and Tilt Adjustments.
Figure 4.2.4: PILF12 Compatibility Overview.
5. Configurazione e installazione
Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver, socket wrench). Read all instructions carefully.
5.1 Controlli pre-installazione
- Controlla la compatibilità TV: Verify your TV's size, weight, and VESA mounting pattern against the specifications for your mount model (PIMF4 or PILF12).
- Identificare il tipo di muro: Determine if your wall is made of wood studs, solid concrete, or brick. Non installare solo su cartongesso.
- Locate TV Ports: Ensure the TV brackets will not block any essential ports on your television.
Figure 5.1.1: Essential Pre-Installation Checks.
5.2 Fasi di installazione (generali)
The installation process generally involves three main steps. Specific details may vary slightly between models and wall types, refer to the included paper manual for precise drilling templates and hardware selection.
- Fissare le staffe TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are centered and level.
- Installa la piastra a muro:
- Per montanti in legno: Use a stud finder to locate the center of your wood studs. Mark and pre-drill pilot holes. Secure the wall plate to the studs using the lag bolts and washers.
- Per muri in cemento/mattoni: Mark and pre-drill pilot holes. Insert concrete anchors into the holes. Secure the wall plate using the lag bolts and washers.
- Appendere la TV: Carefully lift the television with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated. Engage any safety locking mechanisms if present.
Figure 5.2.1: Simplified Installation Steps.
Figura 5.2.2: Esample of Wall Plate Installation on Wood Studs.
6. Funzionamento e regolazioni
Once installed, your full motion TV mount allows for various adjustments to optimize your viewesperienza di acquisizione.
- Estensione/Retrazione: Gently pull the TV away from the wall to extend it, or push it back towards the wall to retract.
- Girevole: Carefully pivot the TV left or right to achieve the desired viewing angle. Both PIMF4 and PILF12 offer +/-45° swivel.
- Inclinazione:
- PIMF4: Adjust the tilt angle (+5°/-15°) by loosening and tightening the tilt knobs or bolts on the TV brackets.
- PILF12: This model features tool-free tilt adjustment (+5°/-15°). Simply adjust the screen to your preferred angle.
- Livellamento: The PIMF4 model allows for +/-3° leveling adjustment after installation to correct any slight misalignment. Consult your paper manual for specific instructions on how to perform this adjustment.
- Height Adjustment (PIMF4): The PIMF4 mount offers 3 bracket height settings, allowing you to fine-tune the screen height even after the wall plate is installed.
7. Manutenzione
- Pulizia: Pulire il supporto con un panno morbido e asciutto. Evitare detergenti abrasivi o solventi.
- Controlli periodici: Regularly inspect all mounting hardware and connections to ensure they are secure. Tighten any loose screws or bolts.
- Lubrificazione: The articulating arms are designed for smooth movement. No regular lubrication is typically required. If movement becomes stiff, contact customer support.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La TV non è in piano dopo l'installazione. | Wall plate not perfectly level, or TV brackets slightly off. | For PIMF4, use the +/-3° post-installation leveling adjustment. For PILF12, ensure wall plate is perfectly level during installation. |
| Il supporto sembra allentato o instabile. | Mounting hardware not fully tightened, or incorrect wall anchors used. | Immediately remove TV. Re-check all fasteners and wall anchors. Ensure installation on appropriate wall type. Consult a professional if unsure. |
| Difficulty adjusting swivel/tilt. | Joints are too tight, or tilt knobs/bolts are not loosened (PIMF4). | For PIMF4, loosen tilt knobs/bolts slightly. For both models, ensure no cables are obstructing movement. |
| TV ports are blocked by brackets. | TV brackets positioned incorrectly. | Remove TV and re-position brackets, or use spacers to create clearance if possible. This should be checked during pre-installation. |
9. Garanzia e supporto
Pipishell products are designed for durability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Pipishell websito.
If you encounter any issues or have questions regarding your Pipishell TV wall mount, please contact Pipishell customer support:
- Websito: Visit the Pipishell Store on Amazon (per richieste generali e informazioni sui prodotti)
- E-mail/Telefono: Refer to your product packaging or the official Pipishell websito per le informazioni di contatto più aggiornate.
