EDUP EP-9906

EDUP Wireless HDMI Transmitter and Receiver

Manuale di istruzioni

Modello: EP-9906

1. Prodotto finitoview

The EDUP Wireless HDMI Transmitter and Receiver kit allows for wireless streaming of video and audio from a source device (like a PC, laptop, or game console) to a display device (TV, monitor, or projector) with minimal latency. It supports Full HD 1080P resolution at 60Hz and operates on a 5GHz signal for stable transmission up to 165 feet (50 meters) in open environments. The system is designed for plug-and-play functionality, requiring no driver installation.

EDUP Wireless HDMI Transmitter and Receiver kit components

Immagine: Oltreview of the EDUP Wireless HDMI Transmitter and Receiver kit, highlighting its key features like 1080P Full HD, Plug & Play, 2.4G/5G Frequency, and 165FT/50M range.

2. Contenuto della confezione

  • 1 x EDUP Wireless HDMI Transmitter (TX)
  • 1 x EDUP Wireless HDMI Receiver (RX)
  • 1 x adattatore da Mini HDMI a HDMI
  • 1 x Manuale utente
Contents of the EDUP Wireless HDMI kit packaging

Image: The packaging box contents, including the transmitter, receiver, user guide, and a mini HDMI adapter.

3. Istruzioni per l'installazione

3.1 Collegamento del ricevitore (RX)

  1. Connect the HDMI connector of the Receiver (RX) to an available HDMI input port on your TV, monitor, or projector.
  2. Connect the USB cable from the Receiver (RX) to a USB port (5V/1A) on your display device or a separate USB power adapter for power. Ensure the RX unit powers on (indicated by an LED light).

3.2 Collegamento del trasmettitore (TX)

  1. Connect the HDMI connector of the Transmitter (TX) to the HDMI output port of your source device (e.g., laptop, PC, TV Box, PS4/5).
  2. Connect the USB cable from the Transmitter (TX) to a USB port (5V/1A) on your source device or a separate USB power adapter for power. Ensure the TX unit powers on (indicated by an LED light).

3.3 Automatic Pairing and Mirroring

Once both the Transmitter (TX) and Receiver (RX) are powered on and connected, they will automatically attempt to pair. Wait a few seconds until the flashing light on the transmitter stops, indicating a successful connection. The content from your source device will then automatically mirror onto your display.

Diagram showing plug and play setup for EDUP Wireless HDMI

Image: Step-by-step diagram illustrating the Plug and Play setup process for the EDUP Wireless HDMI kit.

4. Modalità operative

The EDUP Wireless HDMI Extender supports two primary display modes:

4.1 Modalità specchio

In Mirror Mode, the content displayed on your source device's screen is duplicated onto the larger display (TV/monitor/projector). This provides an identical visual output on both screens.

4.2 Modalità estesa

Extend Mode expands your desktop workspace, allowing you to have different content displayed on each screen. This enhances productivity and multitasking capabilities, as you can drag windows between your source device and the external display. (Note: Extend mode functionality requires your computer to support this feature.)

Diagram illustrating Mirror and Extend display modes

Image: Visual representation of Mirror Mode (left) and Extend Mode (right) for dual display setups.

5. Multi-compatibilità

The EDUP Wireless HDMI kit is compatible with a wide range of HDMI output devices and operating systems, making it versatile for various applications including conference rooms, home entertainment, and multimedia education.

5.1 Compatible Transmitter (TX) Devices:

  • Computer portatili (Windows, macOS)
  • Desktop Computers (Windows, macOS)
  • TV Box
  • Gaming Consoles (PS4/5, Switch)
  • Lettori Blu-ray
  • Lettori DVD
  • Fotocamere DSLR
  • decoder
  • Decoder via cavo/satellite
  • Tablets (requires additional converter)
  • Smartphones (requires additional converter)

5.2 Compatible Receiver (RX) Devices:

  • Televisori HD
  • Monitorare
  • Proiettori
Diagram showing various compatible devices for EDUP Wireless HDMI

Image: A comprehensive list of compatible devices for both the transmitter (TX) and receiver (RX) units, including various operating systems.

6. Specifiche tecniche

  • Numero modello: EP-9906
  • Dimensioni del prodotto: 5.6 x 3.6 x 1.5 pollici
  • Peso dell'articolo: 3.87 once
  • Colore: Bianco+Grigio
  • Tipo di connettore: Cavo HDMI
  • Supporto alla risoluzione: Fino a 1080P@60Hz Full HD
  • Frequenza wireless: 5GHz (for faster, more stable, and latency-free efficiency)
  • Gamma di trasmissione: Up to 165FT / 50M (in open environments without interference)
  • Latenza: Circa 0.1 secondi
  • Potenza in ingresso: USB 5V/2A (via Micro USB port)
Diagram showing 5GHz 1080P@60Hz capabilities

Image: Illustration highlighting the 5GHz 1080P@60Hz Full HD capabilities of the device.

7. Risoluzione Dei Problemi

7.1 No Signal / Intermittent Connection

  • Alimentazione elettrica: Ensure both the Transmitter (TX) and Receiver (RX) are adequately powered by connecting them to a stable 5V/2A USB power source. Insufficient power is a common cause of connection issues.
  • Ostacoli: The wireless signal can be affected by physical obstacles such as walls, furniture, and even human bodies. For optimal performance, maintain a clear line of sight between the transmitter and receiver.
  • Distanza: While rated for up to 165FT/50M in open environments, the effective range can be significantly reduced in environments with interference or obstacles. Try reducing the distance between the units.
  • Interferenza: Other 5GHz wireless devices (like Wi-Fi routers) can cause interference. Try to minimize other wireless activity in the area or adjust the placement of the units.
  • Riassociazione: If the connection is lost or unstable, try re-pairing the units. Refer to the user manual for specific re-pairing instructions, which often involve pressing a reset button on both units.

7.2 Image Quality Issues (Flickering, Grainy)

  • Mancata corrispondenza della risoluzione: Ensure your source device's output resolution is compatible with the receiver and display. The system supports up to 1080P@60Hz.
  • Potenza del segnale: Poor signal strength due to distance or obstacles can degrade image quality. Try moving the units closer or ensuring a clear line of sight.
  • HDMI Cable/Port: Ensure the HDMI connections are secure and the cables/ports are not damaged.

7.3 Nessun audio

  • Fonte audio: Verify that the audio is working correctly on your source device when connected directly to a display.
  • Visualizza impostazioni audio: Check the audio input settings on your TV/monitor to ensure the correct HDMI input is selected and audio is not muted.

Video: Official EDUP video demonstrating the Wireless HDMI Transmitter and Receiver in various usage scenarios, including business presentations and home entertainment. This video showcases the product's ease of use and performance.

8. Garanzia e supporto

EDUP offers a 3-year manufacturer replacement warranty for this product. Additionally, a 45-day no-questions-asked return policy is provided. For any questions or support needs, please feel free to contact EDUP via Amazon message.

Documenti correlati - EP-9906

Preview Manuale utente del trasmettitore e ricevitore HDMI wireless EDUP EH-WD9905
Manuale utente completo per il kit trasmettitore e ricevitore HDMI wireless EDUP EH-WD9905. Scopri come duplicare lo schermo, associare dispositivi e comprendere le specifiche del prodotto e la conformità alle normative.
Preview Guida rapida all'avvio del trasmettitore wireless EDUP EH-WD9906
Guida rapida per il trasmettitore wireless EDUP EH-WD9906, che descrive in dettaglio le procedure di installazione e associazione per la connessione di display e sorgenti.
Preview EDUP EH-WD9905C Trasmettitore e ricevitore video integrato HDMI/USB-C 30M
Informazioni dettagliate sull'EDUP EH-WD9905C, un estensore video wireless 1080P HDMI/USB-C con una distanza di 30 metri. Include Plug and Play, connessione stabile e amplia compatibilidad.
Preview Guida all'installazione rapida dell'adattatore WiFi USB EDUP EP-AC1633
Guida dettagliata per l'installazione dell'adattatore WiFi USB EDUP EP-AC1633 sui sistemi Windows, incluse informazioni sulla conformità FCC e IC.
Preview Guida all'installazione rapida dell'adattatore wireless USB EDUP
Guida passo passo per installare e collegare l'adattatore wireless USB EDUP (DB1305CU). Include istruzioni di configurazione, metodi di connessione wireless e informazioni sulla conformità FCC.
Preview Telecomando universale per garage EDUP: Guida alla copia e alla risoluzione dei problemi
Scopri come copiare i telecomandi delle porte da garage con il duplicatore universale di EDUP. Questa guida tratta di codice chiaro, metodi di copia, compatibilità e risoluzione di problemi comuni come pulsanti che non rispondono o codici incompatibili.