GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case Instruction Manual

1. Introduzione

Thank you for choosing the GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

2. Informazioni sulla sicurezza

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Maneggiare tutti i componenti con cura per evitare danni causati dall'elettricità statica. Si consiglia di utilizzare un braccialetto antistatico.
• Avoid placing the computer case in direct sunlight, near heat sources, or in areas with high humidity.
• Assicurare una corretta ventilazione attorno al case per evitare il surriscaldamento.
• Tenere le parti di piccole dimensioni e i materiali di imballaggio fuori dalla portata dei bambini.
• Do not attempt to modify the case or its components, as this may void your warranty and pose a safety risk.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case
• 3 x 120mm ARGB PWM Fans (pre-installed)
• Scatola degli accessori (viti, fascette, distanziatori, ecc.)
• Manuale dell'utente (questo documento)

4. Prodotto finitoview

The GAMDIAS ATLAS M1 WH is a mid-tower gaming case designed for optimal performance and aesthetics. It features a panoramic tempered glass design, integrated RGB lighting, and an optimized cooling architecture.

Figura 4.1: Fronte view of the GAMDIAS ATLAS M1 WH case with internal components and digital display.

4.1. Display digitale

The case features an embedded monitor that displays real-time system information, including CPU, GPU, and ambient temperatures. Users can switch between display modes via the I/O port or using the ZEUS CAST software.

Figure 4.2: Close-up of the digital display showing temperature readings.

4.2. Concise I/O Design

Il pannello I/O frontale fornisce un comodo accesso alle porte e ai controlli essenziali:

• 1 x USB 3.2 Gen 2 Type-C Port (up to 10 Gbps)
• 1 porte USB 3.0
• Fan LED Control Button
• Interruttore modalità monitor
• Integrated Audio Jack

Figura 4.3: dettagliata view of the front I/O panel.

4.3. Interior Accommodation

The ATLAS M1 WH case offers generous space for various components:

• Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
• VGA Card Length: Up to 410mm
• Air Cooler Height: Up to 160mm

Figure 4.4: Diagram illustrating interior dimensions and component clearances.

4.4. Storage Compatibility

The case supports flexible storage configurations:

• Up to 4 x 2.5" SSDs
• Alternatively, 3 x 2.5" SSDs + 1 x 3.5" HDD
• Lunghezza PSU: fino a 180 mm

Figura 4.5: Interno view highlighting storage drive and power supply unit mounting areas.

4.5. Supporto di raffreddamento

The ATLAS M1 WH is designed for efficient cooling with support for multiple fans and radiators:

• Up to 6 fans can be installed.
• Radiator Support: Top (up to 360mm/280mm), Side (up to 240mm), Rear (120mm).

Figure 4.6: Cooling configuration options for fans and radiators.

4.6. Built-in ARGB PWM Fans

The case comes with three pre-installed ARGB PWM fans: two 120mm reverse intake fans on the side and one 120mm fan on the rear exhaust. These fans provide excellent airflow and customizable ARGB visuals via the motherboard or the LED control button.

Figura 4.7: View of the pre-installed ARGB PWM fans within the case.

4.7. Functionality with Seamless Visuals

The ATLAS M1 series features perforated air vents and seamless tempered glass panels, offering both optimal airflow and stunning visual presentation of your build.

Figure 4.8: The ATLAS M1 series design, highlighting seamless tempered glass panels.

4.8. Video sulle caratteristiche del prodotto

5. Impostazione

Follow these steps to assemble your computer system within the GAMDIAS ATLAS M1 WH case:

5.1. Preparazione del caso

1. Posizionare la custodia su una superficie piana e stabile.
2. Remove the tempered glass side panel by gently pulling it open (tool-less design).
3. Rimuovere tutti i materiali di imballaggio interni.

5.2. Installazione della scheda madre

1. Installare la schermatura I/O (se non è già fissata alla scheda madre) nell'apertura posteriore del case.
2. Allineare la scheda madre ATX, Micro-ATX o Mini-ITX con i distanziali all'interno del case. Assicurarsi che i distanziali corrispondano al fattore di forma della scheda madre.
3. Fissare la scheda madre con le viti fornite.

5.3. Installazione dell'unità di alimentazione (PSU)

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the designated bay.
3. Fissare l'alimentatore con le viti dalla parte posteriore del case.

5.4. Installazione dell'unità di archiviazione

1. For 2.5" SSDs: Mount the drives to the designated SSD trays or mounting points.
2. For 3.5" HDDs: Install the drive into the HDD cage (if applicable) or designated 3.5" mounting points.
3. Fissare tutte le unità con le viti appropriate.

5.5. Installazione della scheda grafica (GPU)

1. Rimuovere le coperture degli slot PCIe necessari dalla parte posteriore del case.
2. Insert your GPU into the appropriate PCIe slot on the motherboard.
3. Secure the GPU with screws or the retention clip.
4. The case supports both horizontal and vertical GPU mounting (vertical mount requires a separate riser cable, not included).

5.6. Cavi di collegamento

1. Connect all power cables from the PSU to the motherboard, GPU, and storage drives.
2. Connect the front panel I/O cables (USB, audio, power switch, reset switch, LED indicators) to their respective headers on the motherboard.
3. Connect the pre-installed fan cables to the motherboard fan headers or the built-in SATA-powered fan hub.
4. Utilize the cable management routes and tie-downs behind the motherboard tray to keep cables organized and improve airflow.

6. Operativo

6.1. Accensione

Once all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the front I/O panel.

6.2. Digital Display Control

The digital display on the front of the case shows real-time temperature data. Use the dedicated button on the I/O panel to cycle through CPU temperature, GPU temperature, and ambient temperature displays. For advanced control and customization, install the GAMDIAS ZEUS CAST software.

6.3. Controllo dell'illuminazione ARGB

Le ventole ARGB preinstallate possono essere controllate in due modi:

• Sincronizzazione della scheda madre: Connect the ARGB cables to a compatible 5V 3-pin ARGB header on your motherboard and use your motherboard's RGB software for synchronization and effects.
• Case Control: Use the LED control button on the front I/O panel to cycle through various pre-set lighting effects and colors if not connected to a motherboard ARGB header.

7. Manutenzione

Una manutenzione regolare contribuisce a garantire la longevità e le prestazioni ottimali del tuo sistema informatico.

• Pulizia del filtro antipolvere: The case includes magnetic dust filters on the top and bottom. Regularly remove and clean these filters with water and mild soap, or simply brush off accumulated dust. Ensure they are completely dry before reattaching.
• Pulizia della cassa: Utilizzare un morbido, damp cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
• Rimozione della polvere interna: Periodically use compressed air to clear dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before performing internal cleaning.

8. Risoluzione Dei Problemi

If you encounter issues with your GAMDIAS ATLAS M1 WH case, refer to the following common problems and solutions:

• Nessun potere:
  • Assicurarsi che l'alimentatore sia collegato correttamente alla presa a muro e che l'interruttore di alimentazione sull'alimentatore sia in posizione "ON".
  • Verificare che il cavo dell'interruttore di alimentazione del pannello frontale sia collegato correttamente al connettore della scheda madre.
• Le ventole non girano / RGB non funzionanti:
  • Check if the fan power cables are securely connected to the motherboard or the fan hub.
  • Ensure the ARGB cables are connected to a compatible 5V 3-pin ARGB header on the motherboard or the case's internal controller.
  • Se si utilizza il software della scheda madre, assicurarsi che sia installato e configurato correttamente.
• Display digitale non funzionante:
  • Verify that the display's power and data cables are correctly connected to the motherboard.
  • Ensure the ZEUS CAST software is installed and running.
• Surriscaldamento:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake/exhaust).
  • Clean any dust filters and internal components to improve air circulation.
  • Verify that CPU and GPU coolers are properly installed and functioning.

For further assistance, please contact GAMDIAS customer support.

9. Specifiche

10. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale GAMDIAS webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

GAMDIAS Ufficiale Websito: www.gamdia.com