Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-S12W-S 120mm ARGB PWM Case Fan. Please read this guide thoroughly before installation to ensure proper functionality and longevity of your product.
Immagine: Oltreview of the Thermalright TL-S12W-S 120mm ARGB PWM Case Fans, highlighting dual side pad shock absorption, airflow fan blade design, and low noise S-FDB bearing.
Caratteristiche del prodotto
- Raffreddamento ad alte prestazioni: Automatic speed control via 4-pin PWM fan cable, adjusting speed based on motherboard temperature.
- Illuminazione ARGB: Features an ARGB light effect with 7 fan blades for soft, synchronized lighting. Colors can be managed via motherboard ARGB port.
- Costruzione durevole: Made from insulation grade PBT+PC material.
- Funzionamento silenzioso: Soft silicone feet on all four corners reduce fan noise through damping.
- Fluid Dynamic Bearing (S-FDB): Equipped with a high-durability S-FDB bearing for low-friction and low-noise operation, ensuring a long service life.
- Flusso d'aria ottimizzato: Fine-tuned fan blade shape and angles for enhanced airflow performance.
Image: Close-up of the fan, illustrating the 7-blade design and PWM fan speed sync connector, capable of 47.6 CFM airflow at 1500 RPM.
Image: Detail of the fan's corner, showing the soft-touch silicone rubber pads designed for vibration absorption and noise damping.
Contenuto della confezione
Il pacchetto include i seguenti articoli:
- Thermalright TL-S12W-S CPU Fan (3 units for X3 pack)
- Viti di montaggio
- Cavi di illuminazione ARGB
- Cavi per ventole PWM
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | TL-S12W-S |
| Dimensioni | 120 x 120 x 25 mm (4.72"L x 0.98"W x 4.72"H) |
| Velocità | 1500 giri/min ±10% |
| Livello di rumore | ≤ 23.2 dBA |
| Flusso d'aria | 47.6 piedi cubi |
| Pressione dell'aria | 1.31 millimetro di H2O |
| Connettore | 4-Pin PWM (Fan), 3-Pin ARGB (+5V) |
| Attuale | 0.15A |
| Voltage | 12 Volt (CC) |
| Cosatage | 1.8 watt |
| Tipo di cuscinetto | S-FDB (cuscinetto fluidodinamico) |
| Materiale | PBT+PC Plastic |
| Dispositivi compatibili | Desktop PCs (Case, CPU Air Coolers, Liquid Coolers) |
Configurazione e installazione
Follow these steps to properly install your Thermalright TL-S12W-S fans into your PC system.
1. Installazione fisica
- Determinare la direzione del flusso d'aria: Select the fan installation direction based on your PC case's desired airflow. Fans typically have an arrow indicating airflow direction.
- Montare la ventola: Position the fan in the desired location (e.g., rear exhaust, front intake, top exhaust). Use the provided screws to secure the fan to the PC case. Ensure a snug fit without overtightening.
Image: A fan being placed into a PC case opening, demonstrating the initial step of physical installation.
Image: A hand using a screwdriver to secure a fan to the back of a PC case, illustrating the screw-in installation process.
2. Wiring for ARGB Lighting
- Connect ARGB Headers: Each fan has a 3-pin ARGB header. Connect these headers in series using the provided ARGB sync cables. Ensure the arrows on the connectors align to maintain correct polarity.
- Connetti alla scheda madre: Plug the final 3-pin ARGB cable into your motherboard's +5V ARGB header. The TL-S12 series supports connecting up to 4 fans to a single motherboard 3-pin ARGB socket, while the TL-S12S series supports up to 3.
Image: Close-up of ARGB lighting cables being connected, showing the male and female headers and the importance of aligning arrows for proper synchronization.
3. Wiring for Fan Speed Control (PWM)
- Connect PWM Headers: Connect the 4-pin PWM headers of the fans in series using the provided PWM sync cables.
- Connetti alla scheda madre: Plug the final 4-pin PWM cable into your motherboard's fan header. This allows the motherboard to control the fan speed automatically based on system temperature. A maximum of 3 fans can be connected to a single motherboard fan socket.
Image: A series of fans with their PWM cables being connected, demonstrating how to daisy-chain them for synchronized speed control.
4. Guida video all'installazione
Video: Official installation guide for Thermalright TL-S12 series fans, demonstrating the physical installation into a PC case and wiring for ARGB lighting and PWM fan speed control.
Istruzioni per l'uso
Once installed and connected, your Thermalright TL-S12W-S fans will operate as follows:
- Controllo della velocità della ventola PWM: The fans' speed is automatically regulated by your motherboard via the 4-pin PWM connection. This ensures optimal cooling performance by adjusting fan speed based on CPU or system temperature. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
- Controllo dell'illuminazione ARGB: The ARGB lighting effect is controlled by your motherboard's +5V ARGB header. You can customize lighting patterns, colors, and synchronization through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard software is up-to-date for the best experience.
Image: The fan showcasing its dual-side ring ARGB lighting, illustrating the aesthetic customization possibilities.
Manutenzione
Regular maintenance helps ensure optimal performance and extends the lifespan of your fans.
- Pulizia della polvere: Pulire periodicamente la polvere dalle pale della ventola e dal telaio utilizzando aria compressa o una spazzola morbida. Assicurarsi che il PC sia spento e scollegato prima di pulirlo.
- Cuscinetto: The S-FDB bearing is designed to be maintenance-free. Do not attempt to disassemble the fan for lubrication or repair, as this may void the warranty.
- Gestione dei cavi: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components, which could lead to damage or noise.
Risoluzione dei problemi
If you encounter issues with your Thermalright TL-S12W-S fans, refer to the following common troubleshooting steps:
- La ventola non gira:
- Verificare che il cavo PWM a 4 pin sia collegato saldamente al connettore della ventola della scheda madre.
- Verify that the motherboard's fan header is enabled in BIOS/UEFI settings.
- Assicurarsi che l'alimentatore funzioni correttamente.
- Illuminazione ARGB non funzionante:
- Confirm the 3-pin ARGB cable is correctly connected to the motherboard's +5V ARGB header, with arrows aligned.
- Check your motherboard's RGB software to ensure lighting is enabled and configured.
- Ensure the motherboard's ARGB header is providing power.
- Rumore eccessivo:
- Verify that all mounting screws are tightened properly.
- Controllare che non vi siano cavi o ostruzioni a contatto con le pale della ventola.
- Pulire eventuali accumuli di polvere sulle pale della ventola.
- Ensure the fan is not running at excessively high RPMs; adjust fan curves in BIOS/UEFI if necessary.
Garanzia e supporto
Thermalright products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the official Thermalright webo contattare il rivenditore locale. Conservare la prova d'acquisto per eventuali reclami in garanzia.
