Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Immagine: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Informazioni sulla sicurezza
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Sicurezza elettrica: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure all wiring connections are secure and comply with local electrical codes.
- Messa a terra: The fixture must be properly grounded to prevent potential electrical shock.
- Elettricista qualificato: In caso di dubbi su qualsiasi fase del processo di installazione, consultare un elettricista qualificato.
- Temperatura di esercizio: Non utilizzare l'apparecchio al di fuori dell'intervallo di temperatura specificato.
- Posizioni umide: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Configurazione e installazione
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Prepararsi per l'installazione
- Disimballare l'apparecchio e ispezionarlo per verificare che non vi siano danni.
- Assicurarsi che siano presenti tutti gli accessori di montaggio necessari.
- Disattivare l'alimentazione elettrica tramite l'interruttore generale.
2. Montaggio dell'apparecchio
- Fissare la staffa di montaggio alla scatola di giunzione utilizzando le viti fornite.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Fissare l'apparecchio alla staffa di montaggio.
3. Collegamenti elettrici
- Collegare il nero filo dall'apparecchio al black (live) filo dall'alimentatore.
- Collegare il bianco filo dall'apparecchio al white (neutral) filo dall'alimentatore.
- Collegare il green (ground) filo dall'apparecchio al green or bare copper (ground) filo dall'alimentatore.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Regolazione delle teste luminose
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Immagine: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Immagine: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Istruzioni per l'uso
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selezione delle modalità di illuminazione
Use the control dial on the motion sensor to select one of three operating modes:
- PUNTUALE: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- AUTO: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Immagine: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Immagine: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Impostazioni del sensore di movimento
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Sensibilità standard per uso generale.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Immagine: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Immagine: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Regolazione della temperatura del colore (CCT)
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Bianco morbido
- 3000K: Bianco caldo
- 3500K: Neutro Bianco
- 4000K: Bianco freddo
- 5000K: Luce del giorno
Immagine: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità del proiettore.
- Pulizia: Pulire periodicamente l'apparecchio con un panno morbido eamp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o i componenti elettrici.
- Ispezione: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Lente del sensore: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
Risoluzione dei problemi
Se riscontri problemi con il tuo proiettore, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| La luce rimane costantemente accesa. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| Il sensore di movimento non rileva il movimento. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| La luce tremola o si affievolisce. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Specifiche del prodotto
- Marca: Disturbo dello spettro autistico
- Nome modello: SFL A-SFL-20BK
- Numero parte: A-SFL-20BK
- Colore: Black with Motion Sensor
- Materiale: Alluminio, Policarbonato
- Stile: Moderno
- Forma della lampada: Proiettore
- Tipologia di camera: Spazi esterni
- Dimensioni del prodotto: 10.24 cm L x 4.45 cm P x 6.81 cm A
- Usi specifici del prodotto: All'aperto
- Utilizzo interno/esterno: All'aperto
- Fonte di energia: Cablato
- Tipo di installazione: Flush Mount
- Caratteristiche speciali: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Metodo di controllo: Remote (referring to sensor adjustments, not a physical remote)
- Tipo di sorgente luminosa: GUIDATO
- Voltage: 120 Volt
- Metodo di illuminazione: Regolabile
- Peso dell'articolo: 1 libbre
- Cosatage: 20 watt
- Conteggio unità: 1.0 Conteggio
- Tipo di montaggio: Montaggio a parete
- Tipo di dispositivo: Non rimovibile
- Codice UPC: 810128113458
- Certificazioni: UL, DLC Premium
- Durata: 145,000 ore
Informazioni sulla garanzia
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a Garanzia limitata di 5 anno dalla data di acquisto. La presente garanzia copre i difetti di materiali e di fabbricazione in condizioni di normale utilizzo. Non copre danni derivanti da installazione impropria, incidenti, uso improprio, abuso o modifiche non autorizzate.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Assistenza clienti
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD website for the most current contact information, including phone numbers, email addresses, and online support resources.
Risorse online: Visit the ASD Store on Amazon
