Manuale di istruzioni

Prodotto finitoview

The Anderic RRTX012 is a replacement remote control designed for Harbor Breeze A25-TX012 and A25-TX025 ceiling fan models. This remote provides comprehensive control over your ceiling fan's fan speeds, direction, and lighting functions, including dimming. It is engineered to restore full functionality and enhance comfort in your living space.

Figura 1: Fronte e retro view of the Anderic RRTX012 remote control, showing buttons for fan speed, light control, and timer, along with the battery compartment on the back.

This remote is specifically compatible with Harbor Breeze ceiling fans that utilize FD30-H02R, FD40-H02R, and FD40-H03R receivers. It offers features such as 6-speed fan control, reversible airflow for seasonal use, a sleep timer, independent up-light and down-light dimming, natural breeze simulation, and a walk-away light delay function.

Figure 2: The Anderic RRTX012 remote control alongside a list of compatible Harbor Breeze ceiling fan models, emphasizing seamless integration.

Impostare

1. Installazione della batteria

The Anderic RRTX012 remote control requires one A23 12V battery (sold separately). Follow these steps to install the battery:

1. Individuare il coperchio del vano batterie sul retro del telecomando.
2. Slide the cover downwards in the direction of the arrow to open it.
3. Insert one A23 12V battery, ensuring the positive (+) and negative (-) terminals are aligned correctly.
4. Riposizionare il coperchio del vano batteria finché non scatta in posizione.

2. Istruzioni per l'associazione

For the remote to communicate with your ceiling fan, it must be paired with the fan's receiver (receiver/transmitter sold separately and required for operation). Follow these simple steps for pairing:

1. Cycle power to the fan (turn the fan's power off and then on at the wall switch or circuit breaker).
2. Within 30 seconds of restoring power to the fan, install the battery in the remote control.
3. Locate the "LEARN" key inside the battery compartment of the remote.
4. Press and hold the "LEARN" key.
5. Wait for the fan light to blink, indicating successful pairing.

Figure 3: Detailed diagram illustrating the battery compartment, the "LEARN" key, and dip switches (if applicable) for pairing the remote.

3. Installazione con montaggio a parete

The remote comes with a wall mount bracket for convenient storage and access. To install the wall mount:

1. Scegliere una posizione adatta su una parete, lontano dalla luce solare diretta o da fonti di calore.
2. Utilizzare le viti fornite per fissare la staffa di montaggio a parete alla parete.
3. Slide the remote control into the bracket for secure storage.

Figure 4: The Anderic RRTX012 remote control securely placed in its wall mount bracket, providing quick access and organization.

Istruzioni per l'uso

The Anderic RRTX012 remote control provides intuitive buttons for various fan and light functions.

Figure 5: The Anderic RRTX012 remote control demonstrating its ability to adjust airflow and brightness with precision.

Controllo della ventola

• Pulsante di accensione (centrale): Press to turn the fan ON or OFF.
• Fan Speed Buttons (1-6): Select desired fan speed from 1 (lowest) to 6 (highest).
• Natural Breeze Mode (Wave icon): Activates a mode that simulates natural airflow by varying fan speeds.
• Reverse Airflow Switch (Slider): Located at the bottom of the remote, slide to change fan direction for summer (downward airflow) or winter (upward airflow).
• Sleep Timer (2H, 4H, 8H buttons): Press to set the fan to automatically turn off after 2, 4, or 8 hours.

Controllo della luce

• Light ON/OFF & Dimming (Lightbulb icon): Press to turn lights ON or OFF. Press and hold to dim or brighten the lights.
• Up-light Control (Up-arrow house icon): Controls the fan's up-lights (if applicable). Press to turn ON/OFF, press and hold to dim.
• Down-light Control (Down-arrow house icon): Controls the fan's down-lights (if applicable). Press to turn ON/OFF, press and hold to dim.
• Walk-Away Light Delay (Clock icon): Activates a delay function that automatically turns off lights after a set period, allowing you to leave the room before the lights extinguish.

Home Shield Mode

The remote may include a "Home Shield" mode, which can randomly turn lights on and off to simulate occupancy when you are away, enhancing home security. Refer to your fan's specific receiver manual for activation details if this feature is supported.

Manutenzione

Pulizia

To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.

Sostituzione della batteria

Replace the A23 12V battery when the remote's indicator light dims or when the remote becomes unresponsive. Follow the battery installation steps outlined in the Setup section.

Magazzinaggio

When not in use for extended periods, it is recommended to remove the battery from the remote control to prevent potential leakage and damage. Store the remote in a cool, dry place.

Risoluzione dei problemi

If issues persist after attempting these solutions, consult a qualified electrician or contact Anderic customer support.

Specifiche

• Numero modello: RRTX012/A25-TX012/A25-TX025
• Marca: Anderico
• Compatible Fan Receivers: FD30-H02R, FD40-H02R, FD40-H03R (Harbor Breeze)
• Fonte di energia: 1 x A23 12V Battery (not included)
• Dimensioni: Circa 5.31 x 3.9 x 1.34 pollici (dimensioni della confezione)
• Peso dell'articolo: 2.88 once
• Colore: Bianco
• Caratteristica speciale: OEM - by Anderic

Figure 6: The compact and ergonomic design of the Anderic RRTX012 remote control, highlighting its ease of use and comfortable fit.

Garanzia e supporto

For information regarding product warranty, returns, or technical support, please refer to the official Anderic websito o contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.

Produttore: Dan's Electronics Etc., Inc.