Vixic P-T M950 Label Maker Machine User Manual

1. Introduzione

This manual provides detailed instructions for the setup, operation, and maintenance of your Vixic P-T M950 Label Maker Machine. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

Figure 1: Vixic P-T M950 Label Maker Machine and accessories.

2. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• 1 x Vixic M950 Label Maker Machine
• 1 x MZ Label Tape (Black on White, 12mm*4m)
• 1 x Cavo di ricarica di tipo C
• 1 x Manuale utente

3. Impostazione

3.1 Ricarica del dispositivo

The label maker is equipped with a built-in 1200mAh lithium battery. Before first use, fully charge the device.

1. Collegare il cavo di ricarica Type-C in dotazione alla porta di ricarica del dispositivo.
2. Collegare l'altra estremità del cavo a un adattatore di alimentazione USB compatibile (non incluso).
3. The device takes approximately 2.5 hours to fully charge. The charging indicator will show the charging status.

Figure 2: Charging the Vixic M950 Label Maker. A full charge allows for approximately 1.6 hours of continuous printing.

3.2 Caricamento del nastro per etichette

To load or replace the label tape:

1. Locate the tape compartment on the back of the label maker.
2. Open the integrated back cover.
3. Insert the label tape cassette into the compartment, ensuring it clicks into place. The tape end should extend slightly from the printer's output slot.
4. Chiudere saldamente il coperchio posteriore.

Figure 3: Loading the label tape cassette into the Vixic M950 Label Maker.

4. Istruzioni per l'uso

4.1 Accensione/Spegnimento

Press the power button to turn the device on or off. The backlit LCD display will illuminate upon powering on.

4.2 Creazione di etichette

The Vixic M950 offers two modes for label creation:

4.2.1 Keyboard Input Mode

1. Accendere il dispositivo.
2. Use the QWERTY keyboard to type your desired text. The 14-character backlit LCD display allows for easy preview.
3. Premere il pulsante "Stampa" per stampare l'etichetta.

4.2.2 Bluetooth App Mode

For advanced customization, connect to the "Print Master" app via Bluetooth.

1. Scarica l'app "Print Master" dall'app store del tuo dispositivo.
2. Assicurati che il Bluetooth sia abilitato sul tuo smartphone.
3. Open the "Print Master" app and connect to your Vixic M950 device.
4. Use the app to design your label with various fonts, borders, symbols, and clip art.
5. Send the design to the label maker for printing.

Figure 4: Label creation using both the integrated keyboard and the Bluetooth app.

4.3 Opzioni di personalizzazione

The Vixic M950 offers extensive customization:

• Caratteri: Choose from 8 artistic fonts.
• Confini: Select from 103 borders/underscores.
• Simboli e clipart: Access 791 symbols and clip art options.
• Conservazione delle etichette: Store up to 9 labels for future printing, each supporting up to 89 characters.

Figure 5: Customization options available for label design.

4.4 Taglio delle etichette

The device features a built-in cutter for clean label separation. After printing, press the cutter button to trim the label.

5. Manutenzione

5.1 Cura della batteria

Per prolungare la durata della batteria:

• Caricare completamente il dispositivo prima dell'uso iniziale.
• The device automatically shuts down after 5 minutes of inactivity to conserve power.
• Evitare di esporre il dispositivo a temperature estreme.

5.2 Pulizia

Gently wipe the exterior of the label maker with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

6. Risoluzione Dei Problemi

If you encounter issues with your Vixic M950, please refer to the following common solutions:

• Il dispositivo non si accende: Ensure the battery is charged. Connect the device to the Type-C cable and a power source.
• Nessuna stampa o stampa sbiadita: Check if the label tape is correctly installed and not empty. Ensure the tape is properly aligned in the output slot.
• Problemi di connessione Bluetooth: Make sure Bluetooth is enabled on your smartphone and the "Print Master" app is updated. Restart both the label maker and your smartphone.
• Labels not cutting cleanly: Ensure the tape is fully extended before cutting. The built-in cutter should be free of debris.

For further assistance, please contact Vixic customer support.

7. Specifiche

8. Garanzia e supporto

Vixic provides professional customer service and technical support for its products. For any inquiries, technical assistance, or warranty claims, please contact our support team through the following channels:

• E-mail: Refer to your product packaging or the official Vixic websito per l'indirizzo email più aggiornato.
• Chat dal vivo: Available on the official Vixic websito durante l'orario lavorativo.

Figure 6: Vixic Customer Service and Technical Support.