Aisens DT32TSR-219 Table Mount Instruction Manual

1. Introduzione

Thank you for choosing the Aisens DT32TSR-219 Table Mount. This product is designed to provide a secure and ergonomic solution for mounting 17-32 inch screens to your desk. It features adjustable swivel, tilt, and rotation capabilities to optimize your viewing experience. Please read this manual carefully before installation and use to ensure proper setup and safe operation.

2. Informazioni sulla sicurezza

• Capacità di peso: Do not exceed the maximum supported weight of 9 kg (19.8 lbs). Exceeding this limit may result in instability and potential damage or injury.
• Dimensioni dello schermo: This mount is designed for screens between 17 and 32 inches. Using screens outside this range may affect stability and functionality.
• Compatibilità VESA: Ensure your screen has VESA mounting patterns of 75x75mm or 100x100mm.
• Montaggio: Follow all assembly instructions carefully. Improper installation can lead to product failure or injury.
• Utensili: Use appropriate tools for assembly. Do not overtighten screws.
• Bambini: Tenere le parti di piccole dimensioni lontano dalla portata dei bambini.
• Manutenzione: Controllare regolarmente tutte le viti e i collegamenti per assicurarsi che siano sempre ben saldi.

3. Contenuto della confezione

Please verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.

• Gruppo braccio monitor
• Scrivania Clamp Base
• Piastra VESA
• Kit di montaggio (viti, rondelle, distanziali)
• Chiavi a brugola
• Manuale dell'utente (questo documento)

4. Specifiche

5. Configurazione e installazione

Follow these steps carefully to install your Aisens DT32TSR-219 Table Mount.

5.1. Attach Desk Clamp Base

1. Posizionare la scrivania clamp base on the edge of your desk.
2. Stringere la clamp Avvitare fino a quando la base non è fissata saldamente alla scrivania. Assicurarsi che sia stabile e non oscilli.

5.2. Assemble Monitor Arm

1. Insert the main monitor arm assembly into the pole on the desk clamp base.
2. Secure the arm at the desired height using the provided screws and Allen key.

Figure 1: Technical diagram illustrating the dimensions and adjustable ranges of the monitor arm, including VESA plate details and clamp opzioni.

5.3. Fissare la piastra VESA al monitor

1. Carefully lay your monitor face down on a soft, clean surface to prevent scratches.
2. Allineare la piastra VESA con i fori di montaggio sul retro del monitor.
3. Use the appropriate screws (M4 or M5, depending on your monitor) from the hardware kit to secure the VESA plate to the monitor. Do not overtighten.

Figure 2: The monitor mount's VESA plate securely attached to the back of a monitor.

5.4. Montare il monitor sul braccio

1. With assistance if needed, carefully slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm.
2. Ensure the monitor is fully seated and secured. Some VESA heads have a locking mechanism; engage it if present.

Figure 3: The complete Aisens DT32TSR-219 monitor arm assembly, showing the VESA mounting head and desk clamp.

5.5. Gestione dei cavi

Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace. Open the covers, insert cables, and close the covers.

6. Istruzioni per l'uso

The Aisens DT32TSR-219 mount offers various adjustments for optimal viewcomfort.

6.1. Regolazione dell'altezza

The monitor arm can be adjusted vertically along the pole of the desk clamp. Loosen the securing screw, move the arm to the desired height, and retighten the screw firmly.

6.2. Regolazione dell'inclinazione

The monitor can be tilted +90° upwards and -45° downwards. Gently push or pull the top or bottom of your monitor to achieve the desired tilt angle. If the tilt is too loose or too stiff, adjust the tension screw on the VESA head using the provided Allen key.

6.3. Regolazione della rotazione

The monitor arm can swivel ±180° at the base and at the joint near the VESA plate. Gently rotate the monitor to the left or right to adjust its horizontal viewangolo di ing.

Figure 4: The monitor mount allows for flexible tilting and angling of the screen.

6.4. Regolazione della rotazione

The VESA plate allows for ±180° rotation, enabling you to switch your monitor between landscape and portrait orientations. Gently rotate the monitor clockwise or counter-clockwise until it locks into the desired position.

Figure 5: The monitor can be easily rotated to a portrait orientation for specific tasks.

6.5. Spring Tension Adjustment

The arm features a gas spring for smooth height adjustment. If the monitor drifts up or down, or is difficult to move, adjust the spring tension screw located on the arm using the appropriate Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors.

7. Manutenzione

• Pulizia: Pulisci il supporto con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi.
• Controlli periodici: Every few months, check all screws and connections to ensure they are tight and secure. Re-tighten if necessary.
• Lubrificazione: The moving parts are designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by the manufacturer.

8. Risoluzione Dei Problemi

9. Garanzia e supporto

Aisens products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Aisens website. If you encounter any issues or require technical assistance, please contact Aisens customer support through their official channels.