Introduzione
Thank you for choosing the Serta Comfort Executive Mid-Back Office Chair. This manual provides detailed instructions for the proper assembly, operation, and maintenance of your new office chair. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.
Informazioni sulla sicurezza
- Capacità di peso: Do not exceed the maximum weight capacity of 275 pounds (125 kg). Exceeding this limit may cause damage to the chair or personal injury.
- Montaggio: Ensure all parts are securely fastened before use. Do not use the chair if any components are damaged or missing.
- Stabilità: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side while seated.
- Bambini: Keep children away from the chair during assembly. This chair is designed for adult use.
Contenuto della confezione
Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti e integri. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.
- Schienale
- Cuscino del sedile
- Braccioli (2)
- Base (5 stelle)
- Rotelle (5)
- Cilindro di sollevamento a gas
- Piastra del meccanismo
- Pacchetto hardware (viti, rondelle, chiave a brugola)
Installazione e assemblaggio
Assembly is estimated to take 35 minutes with two people recommended. Follow the detailed step-by-step instructions included in your package. A general overview è fornito di seguito:
- Fissare le rotelle alla base: Inserire le cinque rotelle nei fori all'estremità di ciascuna gamba della base a 5 stelle. Spingere con decisione fino a sentire uno scatto.
- Inserire il pistone a gas: Posizionare il cilindro di sollevamento a gas nel foro centrale della base assemblata.
- Fissare la piastra del meccanismo al sedile: Fissare la piastra del meccanismo alla parte inferiore del cuscino del sedile utilizzando le viti in dotazione. Assicurarsi che la parte anteriore della piastra del meccanismo sia rivolta verso la parte anteriore del sedile.
- Fissare i braccioli al sedile: Fasten the armrests to the sides of the seat cushion using the designated screws. Do not overtighten.
- Fissare lo schienale al sedile e ai braccioli: Connect the backrest to the seat and armrests using the remaining screws. Tighten all screws securely once all components are aligned.
- Collegare il gruppo sedile al pistone a gas: Posizionare con attenzione il sedile assemblato sul cilindro di sollevamento a gas, assicurandosi che sia centrato.
Image: Product Dimensions. This image illustrates the overall dimensions of the Serta Comfort Executive Mid-Back Office Chair, including width, depth, back height, inner seat width, seat depth, and adjustable seat height range.
Istruzioni per l'uso
Your Serta Comfort Executive Mid-Back Office Chair offers several adjustments for personalized comfort.
Regolazione dell'altezza
To adjust the seat height, locate the lever on the side of the chair, typically on the right side beneath the seat. Lift the lever up while seated to lower the chair, or lift the lever up while standing to allow the chair to rise. Release the lever at your desired height.
Image: Height Adjustment. This image shows the side lever used to adjust the chair's height, with arrows indicating upward and downward movement.
Recline Adjustment and Tension
To recline the chair, pull the lever on the side of the chair (often the same lever as height adjustment, or a separate one) outwards to unlock the recline mechanism. Lean back to recline. To lock the recline position, push the lever inwards. The tension of the recline can be adjusted by twisting the knob located underneath the seat, typically at the front of the mechanism plate. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
Image: Recline Adjustment. This image illustrates the lever for unlocking the recline mechanism and the knob for adjusting recline tension.
Girevole a 360° e ruote
The chair features a 360° swivel function, allowing for easy rotation. The double-wheel casters are designed for smooth movement across various floor surfaces, including carpets and rugs.
Image: 360° Motion. This image highlights the chair's casters and their ability to provide 360-degree movement.
Manutenzione
To maintain the appearance and longevity of your Serta office chair, follow these care instructions:
- Pulizia: Spot clean the bonded leather upholstery as needed. Use a soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners, which can damage the material.
- Ispezione: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to prevent loosening and ensure stability.
- Ruote: Per garantire un rotolamento fluido, tenere le rotelle libere da detriti (capelli, polvere, ecc.).
Image: Foam-Filled Cushion. This image shows the high-quality foam filling of the seat cushion, emphasizing comfort and support.
Risoluzione dei problemi
If you encounter any issues with your Serta Comfort Executive Mid-Back Office Chair, please refer to the following common solutions:
- La sedia affonda o non mantiene l'altezza: Questo in genere indica un problema con il cilindro di sollevamento a gas. Contattare l'assistenza clienti per la sostituzione.
- La sedia oscilla: Ensure all assembly screws are securely tightened. Check the base and casters for any damage or loose connections.
- Le rotelle non girano fluidamente: Remove any hair or debris that may be caught in the caster wheels. Lubricate if necessary with a silicone-based spray.
- Rumori stridenti: Check and tighten all bolts. A small amount of silicone lubricant can be applied to moving parts if the noise persists.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | Comfort Executive Mid-Back OfficeChair |
| Numero di modello | CHR10130D |
| Marca | Serta |
| Colore | Cognac |
| Materiale | Bonded Leather (Upholstery), Foam (Fill), Metal (Base) |
| Dimensioni del prodotto (P x L x A) | 30.25"P x 28.25"L x 44"A |
| Peso massimo raccomandato | 275 libbre (125 kg) |
| Caratteristiche speciali | Cushion Availability, Ergonomic, Rolling Casters, Swivel, Adjustable Height, Recline with Tension Control |
| Assembly Time (Estimated) | 35 minutes (2 people recommended) |
| Certificazioni | ANSI / BIFMA X5.1 (Industry Standard), American Chiropractors Association (ACA) |
Image: Built to Last. This image highlights the chair's compliance with ANSI/BIFMA X5.1 standards and features a heavy-duty Class IV Gas Lift rated for 275 lbs, along with SGS testing documentation.
Informazioni sulla garanzia
Serta chairs are manufactured with quality materials and craftsmanship. For specific warranty details regarding your Serta Comfort Executive Mid-Back Office Chair, please refer to the warranty card included with your product or contact Serta Customer Service.
Assistenza clienti
For assistance with assembly, parts, or any other inquiries regarding your Serta chair, please contact our dedicated U.S.-based customer service team:
- Telefono: (800) 379 - 9773
- Ore: 6am - 5pm PST
Image: Customer Service. This image displays the Serta customer service phone number and operating hours.
