1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Juno 2-Inch Flat Trim Canless Wafer LED Downlight. This innovative lighting solution is designed for quick and easy installation in various ceiling spaces, eliminating the need for traditional recessed housings. It features an all-in-one design with switchable white color temperature and adjustable lumen output, offering versatile lighting for accent, task, or general illumination.
Figure 1: Juno 2-Inch Flat Trim Canless Wafer LED Downlight with its remote driver box.
2. Informazioni sulla sicurezza
Si prega di leggere attentamente tutte le istruzioni prima dell'installazione e di conservare il presente manuale per riferimento futuro. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.
- Prima di iniziare l'installazione o di eseguire qualsiasi intervento di manutenzione, disattivare sempre l'alimentazione elettrica tramite l'interruttore automatico.
- Tutti i collegamenti elettrici devono essere conformi agli standard locali e del Codice Elettrico Nazionale (NEC). Se non si ha familiarità con i collegamenti elettrici corretti, consultare un elettricista qualificato.
- Non modificare o alterare il prodotto in alcun modo.
- Garantire la fornitura voltage è compatibile con l'apparecchio (120 Volt).
- This product is suitable for wet locations and is IC Rated for direct contact with insulation.
- Do not install damaged products. Inspect the product upon receipt.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti e integri prima di procedere con l'installazione:
- LED Lens (Integrated with Downlight Fixture)
- Mounting Hardware (Spring clips, remote driver box)
Note: The downlight fixture and remote driver box are typically pre-assembled or connected.
4 Caratteristiche
The Juno 2-Inch Flat Trim Canless Wafer LED Downlight offers advanced features for optimal lighting performance and ease of use:
- Design senza lattina: No housing required, allowing installation directly into ceiling drywall.
- Switchable White Color Temperature (SWW5): Easily select from five color temperature options:
- 2700K bianco morbido
- Bianco caldo 3000K
- Bianco neutro 3500K
- Bianco freddo 4000K
- Luce diurna 5000K
- Adjustable Lumen Output (ALO25): Choose from three brightness levels (Low, Medium, High) to suit your needs.
- Dimmerabile: Compatible with most standard TRIAC dimmers, dimming down to 10 percent.
- Efficienza energetica: Long-life LEDs and a high-efficiency driver ensure superior illumination and extended service life.
- Classificazione IC: Approved for direct contact with insulation, simplifying installation in insulated ceilings.
- Wet Location Certified: Suitable for use in bathrooms, showers, and outdoor covered areas.
Figure 2: Switches on the remote driver box allow selection of color temperature and lumen output.
Figure 3: Visual guide to the different color temperatures available.
5. Configurazione e installazione
The canless design simplifies installation. Follow these steps for a secure and proper setup:
- Spegnimento dell'alimentazione: Prima di iniziare, assicurarsi che l'alimentazione elettrica nell'area di installazione sia stata interrotta tramite l'interruttore automatico.
- Preparazione dell'apertura: Cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the ceiling space.
- Collegare il cablaggio:
- Open the remote driver box.
- Connect the building's supply wires (hot, neutral, ground) to the corresponding wires in the driver box using appropriate wire connectors.
- Assicurarsi che tutti i collegamenti siano sicuri e adeguatamente isolati.
- Close the driver box cover.
Figure 4: The remote driver box houses the electrical connections and adjustment switches.
- Select Settings (Pre-Installation): Before inserting the downlight into the ceiling, use the switches on the remote driver box to select your desired color temperature (2700K-5000K) and lumen output (Low, Medium, High). These settings can be adjusted later if needed, but it's easier before final installation.
- Insert Driver Box: Place the remote driver box into the ceiling opening. Its slim design allows it to fit into tight spaces.
- Installare Downlight:
- Gently push the spring-loaded clips on the sides of the downlight upwards.
- Insert the downlight into the ceiling opening.
- Once the downlight is fully inserted, release the clips. The clips will spring back down and firmly secure the fixture against the ceiling.
Figure 5: Dimensions of the downlight and driver box for installation planning.
- Ripristina alimentazione: Turn the power back on at the circuit breaker. Test the downlight's functionality.
6. Istruzioni per l'uso
Your Juno LED Downlight is designed for simple operation once installed.
- Accensione/spegnimento: Controllare la luce utilizzando un interruttore a parete standard collegato al circuito.
- dimming: If connected to a compatible TRIAC dimmer switch, adjust the brightness by manipulating the dimmer control. The light can be dimmed down to 10% of its maximum output.
- Adjusting Color Temperature and Lumen Output:
The color temperature and lumen output are set via switches located on the remote driver box (refer to Figure 2). To change these settings after installation, you will need to access the driver box, which may require temporarily removing the fixture from the ceiling or accessing the box through an attic/access panel if it was placed there. It is recommended to set these preferences during installation.
- Interruttore della temperatura del colore: Select from 2700K, 3000K, 3500K, 4000K, or 5000K.
- Lumen Output Switch: Choose Low, Medium, or High brightness.
7. Manutenzione
The Juno LED Downlight requires minimal maintenance due to its durable design and long-life LEDs.
- Pulizia: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o i componenti elettrici.
- Durata della vita del LED: The integrated LEDs are designed for extended operation and do not require replacement under normal use.
8. Risoluzione Dei Problemi
Se riscontri problemi con il tuo downlight, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione al dispositivo. Collegamento del cablaggio allentato. Interruttore o disgiuntore difettoso. | Controllare l'interruttore automatico e l'interruttore a parete. Turn off power, check all wire connections in the driver box. Test switch or breaker; replace if necessary. |
| La luce tremola o si attenua in modo anomalo. | Interruttore dimmer incompatibile. Cablaggio allentato. Circuito sovraccarico. | Ensure dimmer is TRIAC compatible and designed for LED lighting. Spegnere l'alimentazione e controllare tutti i collegamenti dei cavi. Ridurre il carico sul circuito o consultare un elettricista. |
| Temperatura del colore o luminosità errate. | Switches on driver box set incorrectly. | Access the remote driver box and adjust the color temperature and lumen output switches to desired settings. |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.
9. Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | Giunone |
| Nome del modello | WF2 RD ALO25 SWW5 90CRI 120 MW M6 (Round LED) |
| Misurare | 2-Inch Flat Trim |
| Colore | Bianco opaco |
| Materiale | Alluminio, Policarbonato |
| Tipo di sorgente luminosa | GUIDATO |
| Voltage | 120 Volt |
| Cosatage | 9.2 watt |
| Caratteristiche speciali | Adjustable Color Temperature (2700K-5000K), Dimmable (Triac), Energy Efficient, Waterproof |
| Tipo di installazione | Flush Mount (Canless) |
| Uso interno/esterno | Indoor, Outdoor (Wet Location Certified) |
| Dimensioni del prodotto | 3.2"L x 3.2"W x 1.3"H (Fixture) |
| Peso dell'articolo | 13.2 once |
| Certificazioni | CSA certified, Title 24, Energy Star, IC Rated |
10. Garanzia e supporto
Garanzia: This product comes with a Limited Warranty. Please refer to the product packaging or the manufacturer's official websito per i termini e le condizioni specifici della garanzia.
Assistenza clienti: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Juno customer support. Contact information can typically be found on the product packaging or the official Juno websito.
Risorse online: For additional information, product updates, or FAQs, visit the official Juno websito: www.acuitybrands.com/brands/juno
