Prodotto finitoview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Contenuto della confezione
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Manuale d'uso
Configurazione e installazione
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
Passaggio 1: scegliere il metodo di montaggio
Determinare se utilizzare C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
Passaggio 3: fissare la piastra VESA al monitor
Fissare la piastra VESA al retro del monitor utilizzando le viti appropriate presenti nel kit hardware. Assicurarsi che le viti siano serrate saldamente, ma non eccessivamente.
Fase 4: Montare il monitor sul braccio
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Utilizzo del braccio del monitor
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewposizione di avanzamento.
Regolazione della posizione del monitor
The arm allows for the following movements:
- Inclinazione: Adjust the monitor angle from +50° to -20°.
- Girevole: Rotate the monitor horizontally up to +90°/-90°.
- Rotazione: Ruotare il monitor di 360° per passare dalla modalità orizzontale a quella verticale.
- Regolazione dell'altezza: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Estensione: The arm can extend up to 21.93 inches.
Regolazione della tensione della molla a gas
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw in senso orario.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw Antiorario.
Regolare gradualmente finché il monitor non rimane in posizione una volta rilasciato.
Manutenzione
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Pulizia: Pulisci il braccio e la base con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi che potrebbero danneggiare la finitura.
- Controlli periodici: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati. Serrare nuovamente se necessario.
- Molla a gas: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Risoluzione dei problemi
Se riscontri problemi con il braccio del monitor, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
Problem: Monitor Sags or Drops
Soluzione: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw Antiorario to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Soluzione: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw in senso orario to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Soluzione:
- Assicurarsi che tutte le viti di montaggio (scrivania clamp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Soluzione:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | GSMU001XL |
| Marca | WALI |
| Compatibilità delle dimensioni del monitor | 17" to 49" Ultrawide/Curved |
| Capacità di peso | Fino a 44 libbre (20 kg) |
| Compatibilità VESA | 75x75mm, 100x100mm |
| Compatibilità dello spessore della scrivania | 0.47" - 1.97" (1.2 cm - 5 cm) |
| Tipo di montaggio | Cclamp, Grommet Base |
| Angolo di inclinazione | +50° / -20° |
| Angolo di rotazione | +90° / -90° |
| Rotazione | 360° (da orizzontale a verticale) |
| Intervallo di altezza | 9.09" - 19.69" (23.1 cm - 50 cm) |
| Estensione massima del braccio | 21.93" (55.7 cm) |
| Integrated Ports | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Materiale | Alluminio |
| Colore | Nero |
Video del prodotto
Garanzia e supporto
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI websito per i dettagli di contatto e i termini di garanzia più aggiornati.
