Informazioni importanti sulla sicurezza
- Do not load more than 400 pounds on the main bed or trundle.
- Seguire sempre attentamente le istruzioni di montaggio per evitare instabilità o crolli.
- Prestare attenzione agli spigoli vivi durante il montaggio e l'uso.
- Assicurarsi che tutti i bulloni e le viti siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
- Durante il montaggio, tenere le parti di piccole dimensioni lontano dalla portata dei bambini per evitare rischi di soffocamento.
Contenuto della confezione
Prima di iniziare il montaggio, assicurarsi che tutti i componenti elencati di seguito siano presenti e integri. Se alcuni componenti risultano mancanti o danneggiati, contattare l'assistenza clienti.
- Testiera imbottita
- Sponde laterali imbottite (2)
- Pediera imbottita
- Trundle Frame with Slats
- Main Bed Slats (Set)
- Support Legs (for main bed and trundle)
- Pacchetto hardware (viti, bulloni, rondelle, chiave a brugola)
Istruzioni per l'installazione e il montaggio
Please read all instructions carefully before assembly. Two adults are recommended for assembly. Clear a spacious area for assembly and place all components on a soft, clean surface to prevent scratches.
Fase 1: Fissare le guide laterali alla testiera e alla pediera
Connect the upholstered side rails to the headboard and footboard using the provided bolts and washers. Ensure the pre-drilled holes align correctly. Do not fully tighten bolts until all major components are connected.

Descrizione dell'immagine: A view of the bed frame partially assembled, showing the upholstered headboard, footboard, and side rails connected. The wooden slats are not yet installed.
Step 2: Install Main Bed Slats
Place the wooden slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing and secure attachment for proper mattress support.

Image description: The main bed frame with wooden slats laid across the support beams, ready for mattress placement. The headboard and footboard are visible.
Step 3: Assemble the Trundle Bed
Assemble the trundle frame according to the separate instructions for the trundle unit. Attach the wheels to the bottom of the trundle frame. Install the trundle slats, ensuring they are securely fastened.

Image description: A grey upholstered bed frame with the trundle unit partially extended from underneath. Both the main bed and the trundle show their respective wooden slat supports.
Fase 4: Serraggio finale e posizionamento
Once all components are assembled, fully tighten all bolts and screws. Place the assembled bed in its desired location. Ensure the trundle slides smoothly in and out.

Image description: A complete DNYN upholstered full size platform bed with the trundle extended, featuring a grey fabric finish and a tufted headboard, situated in a modern bedroom.
Istruzioni per l'uso
Utilizzo del letto estraibile
The trundle bed is designed for convenient extra sleeping space. To use, gently pull the trundle frame from underneath the main bed. The wheels allow for smooth extension. To store, push the trundle back underneath the main bed until it is fully concealed.
Posizionamento del materasso
For the main platform bed, a mattress thickness of 8-10 inches is recommended. For the trundle bed, a mattress thickness of 6 inches is recommended to ensure it fits properly underneath the main bed when stored.
Manutenzione
Pulizia
- Rivestimento in tessuto: Pulisci le macchie con la pubblicitàamp cloth and mild detergent. Blot dry immediately. Do not use harsh chemicals or abrasive cleaners.
- Componenti in legno: Wipe with a soft, dry cloth. Avoid excessive moisture.
Assistenza generale
- Controllare periodicamente tutti i bulloni e le viti per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario per mantenere la stabilità.
- Avoid dragging the bed when moving it; lift it to prevent damage to the frame and flooring.
- Do not jump on the bed or trundle, as this can compromise the structural integrity.
Risoluzione dei problemi
- Rumori stridenti: Check all connections and tighten any loose bolts or screws. Ensure slats are properly seated.
- Il carrello non scorre fluidamente: Check for obstructions underneath the main bed. Ensure trundle wheels are clean and free of debris. Verify that the trundle frame is assembled correctly and not warped.
- Instabilità: Re-check all assembly steps. Ensure all hardware is fully tightened. Verify that the bed is placed on a flat, even surface.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Materiale | Linen, Pine Wood, MDF |
| Misurare | Pieno |
| Colore | Grigio |
| Funzione | Platform Bed with Trundle |
| Dimensioni complessive (L x P x A) | 76'' x 54.3'' x 47.2'' |
| Inner Platform Bed Dimension | 76'' x 54.3'' |
| Trundle Dimension | 75.6'' x 54.3'' |
| Capacità di peso | 400 libbre |
| Recommended Platform Bed Mattress Thickness | 8-10 pollici |
| Spessore consigliato del materasso estraibile | 6 pollici |
| Assemblaggio richiesto | SÌ |

Image description: A technical diagram illustrating the key dimensions of the DNYN Full Size Platform Bed with Trundle, including length, width, and height measurements for both the main bed and the trundle unit.
Informazioni sulla garanzia
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact DNYN customer support.
Assistenza clienti
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DNYN customer support. Please have your model number (Upholstered Full Size) and purchase information ready when contacting support.
- Supporto online: Visit the official DNYN websito per FAQ e opzioni di contatto.
- E-mail: Per assistenza diretta via e-mail, fare riferimento alla documentazione relativa all'acquisto.





