1. Introduzione
Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.
2. Informazioni sulla sicurezza
- Ensure all components are present and undamaged before installation. Do not use if any parts are missing or defective.
- This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. NON MONTARE SOLO SU CARTONGESSO.
- Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
- Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
- Durante l'installazione, utilizzare dispositivi di sicurezza adeguati, tra cui protezioni per gli occhi.
- Tenere lontani bambini e animali domestici durante l'installazione.
- Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.
3. Contenuto della confezione
Please check the package to ensure all parts are included:
Image: Included hardware for the BONTEC TV Wall Mount.
- Montaggio a parete
- Ancoraggi per calcestruzzo (x3)
- Bulloni a testa svasata (x3)
- Washers (φ6mm x3)
- Chiave
- TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
- Spacers: D8*5mm (x8), D8*10mm (x8)
- Square Washers (M4/M6/M8)
4. Specifiche
| Caratteristica | Descrizione |
|---|---|
| Numero di modello | MG400-US-FBA |
| Dimensioni TV compatibili | 26 - 60 pollici |
| Capacità massima di peso | 88 libbre (40 kg) |
| VESA Compliance (mm) | 100x100, 100x200, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| Materiale | Metallo |
| Angolo di inclinazione | da +5° a -10° |
| Angolo di rotazione | ±90° (a seconda delle dimensioni del televisore) |
| Regolazione del livello | ±3° |
| Distanza dal muro | Min: 3.15 pollici, Max: 19.7 pollici |
Image: Compatibility and VESA standards for the mount.
5. Configurazione e installazione
5.1 Controlli pre-installazione
- Identify your wall type: Wood Studs, Concrete, or Brick.
- Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
- Determine the desired height and position for your TV.
Image: Applicable wall types for installation.
5.2 Fissaggio delle staffe alla TV
- Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita.
- Identifica i fori di montaggio VESA sul retro del televisore.
- Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.
5.3 Montaggio della piastra a parete
- Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
- For concrete/brick walls: Insert the concrete anchors into the drilled holes.
- Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.
Image: The BONTEC Full Motion TV Wall Mount.
5.4 Appendere la TV
- Con l'aiuto di qualcuno, sollevare con cautela il televisore con le staffe in dotazione e agganciarle alla piastra a muro.
- Assicurarsi che il televisore sia fissato saldamente alla piastra a muro.
- Tighten any safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.
Image: Easy installation process.
6. Istruzioni per l'uso
The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewesperienza di ing:
- Girevole: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
- Inclinazione: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewing angles. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten.
- Regolazione del livello: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
- Estensione: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.
Image: Swivel, Tilt, and Level adjustments for enhanced viewing.
Image: Extended distance from the wall.
7. Manutenzione
- Controllare regolarmente tutte le viti e i collegamenti per assicurarsi che siano sempre ben serrati e sicuri.
- Pulire il supporto con un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi.
- Non applicare lubrificanti alle parti mobili, salvo diversa indicazione del produttore.
8. Risoluzione Dei Problemi
- TV non in piano: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
- Il supporto sembra allentato: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
- Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
- Parti mancanti: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.
9. Garanzia e supporto
BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:
- Websito: Visit the BONTEC official websito per le FAQ e le informazioni di contatto per l'assistenza.
- E-mail: Refer to your product packaging or warranty card for customer service email address.
Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.
