Manuale utente della stampante laser monocromatica Brother HL-L2460DN

1. Introduzione

This manual provides essential instructions for the safe and efficient use of your Brother HL-L2460DN Monochrome Laser Printer. Please read this manual thoroughly before operating the printer and keep it for future reference. The Brother HL-L2460DN is designed for high-speed monochrome printing with automatic duplex capabilities and versatile connectivity options.

Davanti view of the Brother HL-L2460DN monochrome laser printer, a compact black device designed for efficient document printing.

2. Informazioni importanti sulla sicurezza

Per garantire un funzionamento sicuro, seguire sempre queste linee guida:

• Place the printer on a stable, level surface to prevent it from falling.
• Ensure adequate ventilation around the printer to prevent overheating.
• Utilizzare solo il cavo di alimentazione fornito con la stampante.
• Non esporre la stampante all'acqua o a umidità eccessiva.
• Tenere la stampante lontana dalla luce solare diretta e da fonti di calore.
• Avoid touching the fuser unit, as it can be very hot.

3. Contenuto della confezione

Verify that all items are included in your printer package:

• Stampante laser Brother HL-L2460DN
• Cavo di alimentazione
• Cavo USB
• CD di installazione
• Inbox Toner Cartridge (TN-2570XL, 3000 pages)

4. Guida all'installazione

4.1 Disimballaggio e posizionamento

Carefully remove the printer from its packaging. Remove all protective tapes and packing materials. Place the printer on a sturdy, flat surface with sufficient space around it for ventilation and access to cables. The printer dimensions are approximately 36 cm (D) x 35.6 cm (W) x 18.3 cm (H).

A view of the Brother HL-L2460DN printer with its dimensions (360mm D x 356mm W x 183mm H) indicated, useful for planning placement.

4.2 Installazione della cartuccia del toner

1. Aprire il coperchio anteriore della stampante.
2. Carefully remove the drum unit and toner cartridge assembly from the printer.
3. Unpack the new TN-2570XL toner cartridge.
4. Inserire saldamente la cartuccia del toner nel tamburo finché non si blocca in posizione.
5. Slide the drum unit and toner cartridge assembly back into the printer.
6. Chiudere il coperchio anteriore.

4.3 Caricamento della carta

1. Estrarre completamente il vassoio della carta dalla stampante.
2. Adjust the paper guides to fit the size of the paper you are loading.
3. Fan the paper stack to prevent jams, then load up to 250 sheets into the tray.
4. Spingere delicatamente il vassoio della carta nella stampante finché non scatta in posizione.

4.4 Collegamento della stampante

The HL-L2460DN offers both USB and Ethernet connectivity.

• Connessione USB: Collegare un'estremità del cavo USB alla porta USB della stampante e l'altra estremità al computer.
• Connessione Ethernet (LAN): Connect an Ethernet cable to the printer's LAN port and to an available port on your network router or switch.

4.5 Installazione del driver

Insert the included installation CD into your computer's CD-ROM drive and follow the on-screen instructions. Alternatively, download the latest drivers from the official Brother support website for your specific operating system (Windows, Mac, Linux).

5. Utilizzo della stampante

5.1 Stampa di base

1. Assicurarsi che la stampante sia accesa e collegata al computer o alla rete.
2. Apri il documento che desideri stampare sul tuo computer.
3. Selezionare 'Stampa' dal menu dell'applicazione (ad esempio, File > Stampa).
4. Choose 'Brother HL-L2460DN' as your printer.
5. Adjust print settings as needed (e.g., number of copies, paper size).
6. Fare clic su "Stampa".

5.2 Stampa fronte-retro (due lati)

The HL-L2460DN supports automatic duplex printing to save paper.

1. When printing, access the printer properties or preferences from the print dialog box.
2. Look for an option related to 'Two-sided printing' or 'Duplex'.
3. Selezionare l'impostazione duplex desiderata (ad esempio, rilegatura sul lato lungo, rilegatura sul lato corto).
4. Conferma la tua selezione e procedi con la stampa.

5.3 Stampa in rete

If connected via Ethernet, the printer can be shared across your network.

1. Ensure the printer is connected to your network and has an IP address.
2. On each computer that needs to print, install the printer drivers.
3. Add the printer through your operating system's printer settings, typically by searching for network printers or entering the printer's IP address.

5.4 Navigazione del display LCD

Use the LCD display and control panel buttons to check printer status, configure network settings, and perform maintenance tasks. Refer to the on-screen menus for specific options.

A person is shown at a desk, interacting with the Brother HL-L2460DN printer to initiate a print job, demonstrating typical office use.

6. Manutenzione

6.1 Sostituzione della cartuccia del toner

When the 'Toner Low' or 'Replace Toner' message appears on the LCD, it's time to replace the toner cartridge (TN-2570XL).

1. Aprire il coperchio anteriore.
2. Rimuovere il gruppo tamburo e la cartuccia toner.
3. Press the green lock lever to separate the toner cartridge from the drum unit.
4. Unpack the new toner cartridge and install it into the drum unit until it clicks.
5. Clean the corona wire inside the drum unit by gently sliding the green tab several times. Return the tab to its home position.
6. Reinstall the drum unit and toner cartridge assembly into the printer and close the front cover.

6.2 Pulizia della stampante

Regular cleaning helps maintain print quality and prolong printer life.

• Esterno: Pulire l'esterno della stampante con un panno morbido e privo di lanugine. Non utilizzare detergenti abrasivi o solventi.
• Interno: Occasionally, open the front cover and gently wipe away any loose toner dust with a dry, lint-free cloth. Do not touch the drum unit's surface.

6.3 Risoluzione inceppamento carta

In caso di inceppamento della carta, il display LCD visualizzerà un messaggio di errore. Seguire questi passaggi generali:

1. Spegnere la stampante e scollegare il cavo di alimentazione.
2. Open the front cover and remove the drum unit and toner cartridge assembly.
3. Carefully pull out any jammed paper. If paper is torn, ensure all pieces are removed.
4. Check the rear of the printer and the paper tray for any jammed paper.
5. Reinstall the drum unit and toner cartridge assembly, close all covers, and reconnect the power cord.
6. Turn the printer back on.

7. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare.

• La stampante non stampa:
  - Check power connection and ensure the printer is on.
  - Verify USB or Ethernet cable connection.
  - Ensure drivers are correctly installed.
  - Check for error messages on the LCD display.
  - Confirm paper is loaded and toner cartridge is installed correctly.
• Scarsa qualità di stampa:
  - Toner may be low; replace the toner cartridge.
  - Clean the corona wire.
  - Ensure paper type and quality are appropriate.
  - Check printer settings for print density.
• Inceppamenti della carta:
  - Refer to Section 6.3 for paper jam resolution.
  - Ensure paper is loaded correctly and not overfilled.
  - Use recommended paper types.
• Problemi di connettività di rete:
  - Verify Ethernet cable connection.
  - Check network settings on the printer's LCD display.
  - Ensure the printer has a valid IP address.
  - Restart your router and printer.

8. Specifiche tecniche

9. Garanzia e supporto

Your Brother HL-L2460DN printer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details.

For technical support, driver downloads, FAQs, and further assistance, please visit the official Brother support website or contact your local Brother customer service center. You can also find more information and products at the Negozio Brother.