Prodotto finitoview
This JOYSOG Ebike Controller Kit is designed for 36V, 48V, and 52V electric bicycles, supporting up to 1500W peak power. It features a 3-mode control system (Hall sensor mode, Non-Hall mode, and Self-learning function) for efficient and adaptable motor operation. The kit includes the controller and an EN06 LCD display for clear data visualization and control.
The controller is built with multiple protection features, including over/under voltage, over current, overload, overheating, anti-runaway, and locked-motor protection, ensuring safe and stable operation.
Image: JOYSOG Ebike Controller Kit with EN06 LCD Display components.
Configurazione e installazione
Careful wiring is crucial for proper function. Refer to the wiring diagram and follow the steps below.
Componente suview
Image: The Ebike Controller showing its various wiring harnesses for connection.
Istruzioni di cablaggio
- Fase 1: Connessioni iniziali
Connect the battery, motor phase wires, motor Hall wires, and the EN06 LCD display to the controller. Ensure all connections are secure and match the corresponding plugs. - Step 2: Power On Display
Turn on the display using the NFC card (if applicable) or by long-pressing the power button. - Step 3: Self-Learning Function
Connect the two white self-learning wires. The motor will rotate automatically, and the controller will pair with the motor. Disconnect these wires after approximately 10 seconds. This process corrects any incorrect 3-phase combination between the motor and controller. - Step 4: Connect Throttle and Other Function Wires
Connect the throttle and any other function wires (e.g., brake levers, PAS sensor, lights) as required.
Image: Detailed wiring diagram illustrating connections for battery, motor phase, motor Hall, and display.
Image: Close-up of the XT60 power connector, typically used for battery connection.
Videoguida all'installazione
Video: Detailed installation steps for the brushless controller, including wiring and initial setup. This video demonstrates connecting the battery, motor, display, and performing the self-learning function.
Video: Una rapida panoramicaview of the electric bike controller and LCD display kit components.
Istruzioni per l'uso
The EN06 LCD display provides essential information and allows for parameter adjustments.
EN06 LCD Display
Image: The EN06 LCD Display, showing its interface and control buttons.
Image: Technical drawing showing the dimensions of the EN06 LCD Display (212x86.5x48.5mm).
Funzioni di visualizzazione
- Accensione/spegnimento: Long press the power button to turn the display on or off.
- Livello di assistenza: Use the '+' and '-' buttons to adjust the 5-speed level for throttle and Pedal Assist System (PAS).
- Visualizzazione delle informazioni: The display shows current speed, average speed, maximum speed, trip distance, odometer, riding time, and current battery voltage.
- Cruise Assist Mode: From the home page, long press the 'Up' key to enter or exit cruise assist mode.
Impostazioni dei parametri
To access the settings menu, long press the 'Up' and 'Down' keys simultaneously. The menu provides 20 parameters (P01-P20) for configuration. Refer to the detailed product manual for specific parameter definitions and adjustment ranges.
- Domanda 03: Adjust battery voltage (e.g., 36V, 48V, 52V).
- Other parameters control aspects like wheel diameter, speed limits, and more.
Risoluzione dei problemi
This section addresses common issues and solutions for the Ebike Controller Kit.
Motor Operation Modes
- Hall Sensor Mode (Sine Wave Mode): Standard operation for motors with functional Hall sensors.
- Non-Hall Mode (Square Wave Mode): If your motor's Hall sensor is damaged or incompatible, the controller will automatically switch to square wave mode, allowing continued operation.
- Funzione di autoapprendimento: If the motor rotation direction is incorrect or there's a 3-phase combination issue, use the self-learning function (as described in Setup) to correct it.
Caratteristiche di protezione
The controller includes built-in protections to prevent damage:
- Sopra/sotto voltage Protezione: Safeguards against battery voltage estremi.
- Protezione da sovracorrente: Prevents excessive current draw.
- Protezione da sovraccarico: Protects the motor and controller from excessive load.
- Protezione contro il surriscaldamento: Monitors and manages internal temperature.
- Anti-Runaway Protection: Enhances safety by preventing unintended acceleration.
- Locked-Motor Protection: Detects and responds to motor lock-up conditions.
If an error occurs, check all connections and refer to the full product manual for specific error codes and advanced troubleshooting steps.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | JOYSOG |
| Nome del modello | 36V 48V 52V 1500W |
| Ingresso volumetage Gamma | 36 V / 48 V / 52 V. |
| Potenza nominale | 36 V 650 W / 48 V 860 W / 52 V 930 W |
| Potenza di picco | 36 V 1200 W / 48 V 1600 W / 52 V 1800 W |
| Tipo di freno | Basso volumetage Brake |
| Rotor Position Detecting Method | Sensore Hall |
| Materiale | Alluminio |
| Colore | Argento |
| Dimensioni del controller | Dimensioni: 212 x 86.5 x 48.5 mm |
| Peso del controller | 610g |
| Grado di impermeabilità | Grado di protezione IP65 |
| Componenti inclusi | Ebike Controller Kit |
Manutenzione
To ensure the longevity and optimal performance of your Ebike Controller Kit, follow these general maintenance guidelines:
- Ispezione regolare: Controllare periodicamente tutti i collegamenti elettrici per verificarne la tenuta e l'eventuale presenza di segni di usura o danni.
- Pulizia: Keep the controller and display clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
- Protezione ambientale: While the controller has an IP65 waterproof rating, avoid prolonged exposure to heavy rain or submersion in water to prevent potential damage.
- Gestione dei cavi: Ensure cables are neatly routed and secured to prevent snagging or abrasion during riding.
Garanzia e supporto
Per informazioni sulla garanzia, consultare la documentazione fornita con l'acquisto o contattare direttamente il venditore. Conservare la prova d'acquisto per eventuali reclami in garanzia.
If you encounter any issues or require technical assistance, please contact JOYSOG customer support or the retailer from whom you purchased the product. Provide your product model and a detailed description of the issue for efficient support.
