Aqara Smart Valve Controller T1 (Model VC-X01E) Instruction Manual

1. Introduzione

The Aqara Smart Valve Controller T1 is a smart home device designed to automate the control of water valves in your home. It integrates with Aqara Zigbee 3.0 hubs and supports Matter-over-bridge, allowing compatibility with various third-party smart home platforms. This device provides real-time monitoring and automatic shutoff capabilities when paired with water leak sensors, enhancing home safety and promoting energy efficiency.

2. Cosa c'è nella scatola

Smart Valve Controller T1 x 1
Accessory Kit x 1
Manuale utente x 1

3. Caratteristiche principali

Zigbee with Matter Support: Requires an Aqara Zigbee 3.0 Hub (sold separately) for Matter-over-bridge compatibility with Apple Home, Google Home, Alexa, Samsung SmartThings, Homey, and Home Assistant.
Real-time Monitoring and Automation: Pairs with water leak sensors for automatic shutoff, providing enhanced safety and real-time status updates via the Aqara Home app.
Easy Installation and Wide Compatibility: Retrofit design for existing valves (DN15, DN20, DN25 - 1/2 in, 3/4 in, 1 in) with lever/butterfly handles. No additional piping work required.
Flexible Remote Control: Manage valves remotely through the Aqara Home app or manually on-site.
Risparmio energetico e tutela ambientale: Powered by 4xAA batteries for up to 2 years of operation, eliminating the need for wiring and reducing energy waste.

4. Configurazione e installazione

An Aqara Zigbee 3.0 Hub (sold separately) is required for the full functionality of the Valve Controller T1. Ensure you have a compatible hub (all Aqara hubs except Camera G2H Pro) and a Matter Controller for your chosen platform.

4.1. Considerazioni pre-installazione

The device is rated at IP20 and is not suitable for outdoor installation or areas with water ingress risk.
Ensure sufficient space around the valve for installation. At least 187 x 248 mm should be reserved above the pipeline.
Compatible with DN15, DN20, DN25 (1/2 in, 3/4 in, 1 in) pipe diameters and lever/butterfly handles. Different pipe sizes may require specific installation accessories.

Aqara Smart Valve Controller T1 dimensions

Image: Dimensions of the Aqara Smart Valve Controller T1, showing required clearance for installation.

4.2. Installazione fisica

The Valve Controller T1 is a retrofit device designed for easy installation on existing valves without major plumbing modifications.

Aqara Smart Valve Controller T1 before and after installation

Image: Before and after installation of the Aqara Smart Valve Controller T1 on an existing valve.

The accessory kit includes various clamps and screws to secure the controller to your valve. Ensure the valve handle is properly aligned with the controller's mechanism.

Aqara Smart Valve Controller T1 installation accessories for different pipe sizes

Image: Installation accessories for DN15, DN20, and DN25 pipes, including clampse parentesi.

4.3. Associazione con Aqara Hub

Once physically installed, pair the Valve Controller T1 with your Aqara Zigbee 3.0 Hub using the Aqara Home app. Follow the in-app instructions for device discovery and connection.

4.4. Wi-Fi Setup (if applicable)

If your hub supports Wi-Fi, ensure it is connected to your home network. The Valve Controller T1 communicates with the hub via Zigbee, and the hub connects to your network.

Video: Official installation guide for the Aqara Smart Valve Controller T1, demonstrating the physical setup process.

5. Istruzioni per l'uso

5.1. Remote Control via Aqara Home App

Use the Aqara Home app to remotely open or close your water valve. The app provides a user-friendly interface for managing your device from anywhere.

Aqara Home app interface for valve control

Image: Screenshot of the Aqara Home app showing controls for the Valve Controller T1, including manual open/close and timer settings.

5.2. Controllo manuale

The Valve Controller T1 also allows for manual operation directly on the device, providing flexibility even without app access.

5.3. Automation with Water Leak Sensors

Integrate the Valve Controller T1 with Aqara Water Leak Sensors to create automated rules. For example, if a leak is detected, the valve can automatically shut off the main water supply.

Water Leak Protection Automation example

Image: Diagram illustrating water leak protection automation: if a leak is detected, the main valve is turned off.

Video: Explanation of how the Aqara T1 Valve Controller protects your home by integrating with other smart devices.

5.4. Integrazione della piattaforma Smart Home

The Valve Controller T1 supports major third-party platforms like Apple Home, Amazon Alexa, Google Home, Samsung SmartThings, Homey, and Home Assistant through Matter-over-bridge via the Aqara Hub.

Aqara Smart Valve Controller T1 compatibility with smart home platforms

Image: Visual representation of the Aqara Smart Valve Controller T1's compatibility with various smart home ecosystems including Aqara Home, Apple Home, Amazon Alexa, Google Home, and SmartThings.

6. Manutenzione

6.1. Sostituzione della batteria

The Valve Controller T1 operates on 4xAA batteries. The low-power consumption design ensures the device can function for up to 2 years. Replace batteries when the device indicates low power to ensure continuous operation.

Aqara Smart Valve Controller T1 battery compartment

Immagine: Primo piano view of the battery compartment of the Aqara Smart Valve Controller T1, showing four AA batteries.

7. Risoluzione Dei Problemi

Dispositivo non associato: Ensure your Aqara Zigbee 3.0 Hub firmware is updated and reconnected to the network. Try forcing the valve into pairing mode by removing a battery for about a minute, then pressing and holding the Reset button while reinserting the battery. If issues persist, reset the hub's Zigbee settings.
Valve not operating smoothly: The motor is strong, but stiff valves may cause issues. Ensure proper placement and that the valve operates smoothly manually before installation.
Difficoltà di installazione: Ensure correct accessories are used for your specific pipe size and valve type. Refer to the installation diagrams and videos for guidance.

8. Specifiche

Caratteristica	Dettaglio
Numero di modello	VC-X01E
Marca	Acquara
Dimensioni del prodotto	2.83 x 3.31 x 3.66 pollici (7.19 x 8.41 x 9.30 cm)
Peso dell'articolo	12 once (0.34 chilogrammi)
Materiale	Policarbonato (PC)
Colore	Bianco
Batterie	Sono necessarie 4 batterie AA (incluse)
Temperatura di esercizio	131.15 Degrees Fahrenheit (55.08 °C)
Compatibilità con la casa intelligente	Matter-over-bridge (via Aqara Hub), Apple Home, Google Home, Alexa, Samsung SmartThings, Homey, Home Assistant
Produttore	Lumi United Technology Co., Ltd

9. Garanzia e supporto

Aqara offers various protection plans for their products. Please refer to your purchase documentation or contact Aqara customer support for specific warranty details and technical assistance.

For product setup videos, FAQs, or more information about Aqara products, please visit the official Aqara websito o contattare il team di supporto.

10. Informazioni sulla sicurezza

This device does not provide safeguards against water ingress and is not suitable for outdoor installation.
Prima di eseguire qualsiasi installazione o manutenzione, assicurarsi che tutta l'alimentazione sia scollegata.
If you are unsure about any installation steps, it is recommended to consult a qualified electrician or plumber.

	Manuale utente del controller valvola Aqara T1 User manual for the Aqara Valve Controller T1 (VC-X01E/VC-X01D), providing quick setup, product specifications, battery installation, warnings, and compliance information.
	Aqara Hub M100: connessione a Matter, integrazione delle app e risoluzione dei problemi Una guida completa per connettere Aqara Hub M100 agli ecosistemi Matter di terze parti, integrarlo con l'app Aqara Home, comprenderne le funzionalità e risolvere i problemi più comuni. ...
	Domande frequenti e guida all'installazione di Aqara Hub M1S Domande frequenti e istruzioni di configurazione per Aqara Hub M1S, riguardanti la tecnologia ZigBee, la configurazione della rete Wi-Fi, la posizione di installazione, la risoluzione dei problemi, gli aggiornamenti del firmware, i ripristini di fabbrica, il controllo remoto e l'integrazione con Amazon Alexa, Google Home e Siri.
	Domande frequenti su Aqara Hub: configurazione, connettività e integrazione con la casa intelligente Domande frequenti sull'Aqara Hub, che riguardano la tecnologia ZigBee, la configurazione Wi-Fi, la connettività delle app, il controllo remoto e l'integrazione con Amazon Alexa, Google Assistant e Siri.
	Domande frequenti sull'interruttore da parete intelligente Aqara (senza neutro) Domande frequenti sull'interruttore da parete intelligente Aqara (senza neutro), che riguardano connettività Wi-Fi, funzionalità, distanza, cablaggio, integrazione con le app, procedure di ripristino e risoluzione dei problemi.
	Manuale utente di Aqara Hub M200 Manuale utente per Aqara Hub M200, un hub di controllo per la casa intelligente che supporta Zigbee, Thread, Matter, Wi-Fi 6 e Bluetooth 5.1. Include informazioni su configurazione, connessione e risoluzione dei problemi.

Aqara VC-X01E