ECOELER YWT102 Countdown Timer Switch User Manual

Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.

Caratteristiche del prodotto

• 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
• Sostituzione manuale: Allows instant ON/OFF control, overriding any active countdown.
• Risparmio energetico: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
• Funzionamento semplice: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
• Indicatore LED: An always-on LED light makes the switch easy to locate in low-light conditions.
• Ampia applicazione: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
• Sicuro e affidabile: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).

Immagine: dettagliata view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.

Contenuto della confezione

Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:

• ECOELER YWT102 Countdown Timer Switch
• Matching Wall Plate
• Dadi a filo
• Manuale di istruzioni per l'installazione

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.

Informazioni sulla sicurezza

AVVERTIMENTO: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.

Specifiche

Installazione

Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.

Pre-installazione

1. Spegni l'alimentazione: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltagetester.
2. Rimuovere l'interruttore esistente: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
3. Identificare i fili: Identify the wires connected to your existing switch. Typically, you will find:
   • Hot Wire: Usually black, brings power from the circuit breaker.
   • Cavo di carico: Usually black or red, carries power to the light/fan.
   • Filo neutro: Di solito bianco. A neutral wire is required for this timer switch.
   • Filo di terra: Solitamente rame verde o nudo.

Collegamenti elettrici

Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.

1. Collegare il Filo rosso from the timer to the Carica filo from the wall box using a wire nut.
2. Collegare il Filo nero from the timer to the Filo caldo from the wall box using a wire nut.
3. Collegare il Filo bianco from the timer to the Filo neutro from the wall box using a wire nut.
4. Collegare il Filo verde from the timer to the Filo di terra from the wall box using a wire nut.

Post installazione

1. Carefully push all wires back into the wall box.
2. Secure the timer switch to the wall box with the provided screws.
3. Attach the new wall plate over the timer switch.
4. Ripristina alimentazione: Return to your circuit breaker panel and turn the power back ON.

Istruzioni per l'uso

The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.

Modalità conto alla rovescia

Per attivare un conto alla rovescia:

1. Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
2. The corresponding LED indicator will illuminate, and the countdown will begin.
3. The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
4. To cancel a countdown manually, press the large ON/OFF button at the bottom.

Constant On Mode (Manual Override)

To keep the connected load continuously ON, bypassing the timer function:

1. Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
2. The load will remain ON until the ON/OFF button is pressed again to turn it off.

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.

Manutenzione

The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the switch and wall plate clean by wiping with a soft, damp panno. Evitare detergenti abrasivi o solventi.
• Assicurarsi che l'interruttore non sia esposto a umidità eccessiva o a temperature estreme.
• Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.

Risoluzione dei problemi

If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:

• L'interruttore non risponde: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
• Load Not Turning Off: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
• L'indicatore LED non si accende: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
• Funzionamento intermittente: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.

Se i problemi persistono dopo aver verificato questi punti, contattare l'assistenza clienti.

Garanzia e supporto

The ECOELER Countdown Timer Switch comes with a Garanzia di 1 anno. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COMIl nostro obiettivo è rispondere a tutte le richieste entro 24 ore.

Manufacturer: ECOELER ELECTRIC INC