1. Introduzione
This manual provides detailed instructions for the safe and effective use of the Aideepen 1800W DC-DC Boost Converter. This module is designed to step up a direct current (DC) input voltage from 10V-60V to an adjustable output voltage of 12V-90V, with a maximum output power of 1800W and output current up to 22A. It features robust protection mechanisms and an efficient cooling system, making it suitable for various high-power applications.
2. Informazioni sulla sicurezza
- Always ensure correct input and output polarity. Reverse connection can damage the module and connected devices.
- Non superare il volume massimo di ingressotage (60V) or output current (22A).
- This is a non-isolated module. If connecting in series or parallel, use independent power sources for each module.
- Before applying power, double-check all wiring connections to prevent short circuits.
- Operate in a well-ventilated area. The module generates heat during operation, especially under high loads.
- Avoid touching the module components during operation, as they may become hot.
- In case of any abnormality, immediately disconnect power and inspect the connections.
- Conduct simulation testing with a resistive load before connecting sensitive or critical equipment.
3. Caratteristiche del prodotto
- Ampio ingresso voltage Gamma: Da 10 V a 60 V CC.
- Uscita regolabile Voltage Gamma: Da 12 V a 90 V CC.
- Elevata potenza in uscita: Fino a 1800W.
- Alta corrente di uscita: Regolabile da 1.5 A a 22 A.
- Protezione integrata: Input overcurrent protection, short circuit protection, input reverse connection protection, and low battery protection.
- Sistema di raffreddamento efficiente: Features an air-blade type cooling fan with hydraulic bearing for balanced noise and heat dissipation. The fan activates automatically when the load temperature reaches approximately 60 degrees Celsius.
- Multi-turn Potentiometers: Ensures precise and stable voltagee aggiustamenti attuali.
4. Specifiche
| Parametro | Valore |
|---|---|
| Ingresso volumetage Gamma | 10V - 60V CC |
| Volume di uscitatage Gamma | 12 V - 90 V CC (regolabile) |
| Potenza massima in uscita | 1800W |
| Corrente di ingresso | Fino a 40A |
| Corrente di uscita | 1.5A - 22A (Adjustable) |
| Efficienza | Fino al 98.1% |
| Temperatura di esercizio | Industrial grade (ensure heat dissipation above 40°C ambient) |
| Dimensioni | Approximately 13cm x 5cm (5.1in x 1.97in) |
| Peso | 14.4 once (circa 412.5 g) |
| Numero di modello | 2_GXJA0008-007 |
5. Prodotto finitoview e componenti
The Aideepen 1800W DC-DC Boost Converter features clearly labeled terminals and adjustment potentiometers for ease of use. Below is an illustration of the main components and their functions.
Image 1: Product Wiring Diagram. Questa immagine mostra la parte superiore view of the boost converter module, highlighting key connection points and adjustment components. These include the Input+ and Input- terminals, Output+ and Output- terminals, fuse wire, output voltage regulation potentiometer, output current regulation potentiometer, input indicator light, overcurrent indicator, undervoltage indicator light, and input low cell protective regulation.
Image 2: Temperature Control Fan. This image shows the underside of the boost converter, revealing the integrated cooling fan. The fan is designed to activate automatically when the module's load temperature reaches approximately 60 degrees Celsius, ensuring optimal heat dissipation and extending product lifespan.
6. Istruzioni per l'installazione
Follow these steps to set up your Aideepen 1800W DC-DC Boost Converter:
- Controlla il volumetage Compatibilità: Confirm that your input power supply's voltage is within the 10V-60V range and that your desired output voltage is achievable within the 12V-90V range.
- Preparare gli strumenti: Gather necessary tools such as wire cutters, wire strippers, insulation tape, and a multimeter for testing.
- Cablaggio di ingresso: Connect the positive (+) and negative (-) terminals of your power supply to the module's input terminals (labeled VIN or Input+ / Input-). Ensure correct polarity.
- Cablaggio di uscita: Connect your load to the module's output terminals (labeled VOUT or Output+ / Output-). For initial testing, it is recommended to use an appropriate resistive load to prevent damage to sensitive equipment from incorrect settings.
- Initial Wiring Check: Before applying power, meticulously verify all wiring connections. Ensure there are no loose wires or potential for short circuits. Keep wiring neat and organized.
7. Istruzioni per l'uso
Once the module is wired, proceed with operation and adjustment:
- Power-Up Test: Slowly increase the input power. Observe the module's working status. Use a multimeter to measure the output voltage to confirm it reaches the expected value. If any abnormality is detected, immediately turn off the power for inspection.
- Regola il volume di uscitatage: Se voltage adjustment is required, use the multi-turn potentiometer labeled for output voltage regulation. Turn clockwise to increase voltage, counter-clockwise to decrease. Adjust gradually while monitoring with a multimeter.
- Adjust Output Current (if applicable): If constant current operation is desired, use the multi-turn potentiometer labeled for output current regulation. Adjust to set the desired current limit.
- Test di carico: After confirming correct voltage and current settings, connect your actual load. Monitor the load's operation and the module's temperature rise to ensure stable performance. The integrated fan will activate automatically if the module's temperature reaches approximately 60°C.
8. Manutenzione
The Aideepen 1800W DC-DC Boost Converter is designed for durability. Regular maintenance is minimal but important for longevity:
- Mantenere pulito: Periodically inspect the module for dust accumulation, especially on the heatsink and fan. Use compressed air or a soft brush to gently clean.
- Garantire la ventilazione: Always operate the module in an environment with adequate airflow to facilitate heat dissipation. Avoid enclosing it in tight spaces without ventilation.
- Monitoraggio della temperatura: While the fan is automatic, it is good practice to monitor the module's temperature during prolonged high-load operation. If temperatures consistently exceed safe limits, consider additional cooling.
- Integrità della connessione: Controllare periodicamente tutti i collegamenti elettrici per verificarne la tenuta e l'assenza di segni di usura o corrosione.
9. Risoluzione Dei Problemi
Questa sezione affronta le domande e i problemi più comuni che potresti incontrare.
Image 3: Frequently Asked Questions. This image presents a table of common questions and answers regarding the boost converter's operation, efficiency, protection features, and adjustment.
- Il modulo non si accende:
- Controllare l'input voltage: Ensure it is within 10V-60V.
- Verify input polarity: Incorrect polarity will prevent operation.
- Check fuse: A blown fuse indicates an overcurrent event or short circuit. Replace if necessary.
- Volume di uscitatage is Incorrect or Unstable:
- Regola il volume di uscitatage il potenziometro con attenzione.
- Ensure the load is not drawing excessive current beyond the module's capacity (22A max).
- Controllare eventuali collegamenti allentati o cablaggi difettosi.
- Surriscaldamento del modulo:
- Garantire una ventilazione adeguata.
- Verify the cooling fan is operating when the module is under load and warm.
- Reduce the load if operating continuously at maximum power, especially in ambient temperatures above 40°C.
- Protezione da cortocircuito attivata:
- The module has short-circuit protection. If activated, the fuse may blow. Replace the fuse and identify the cause of the short circuit before re-applying power.
- Protezione da inversione di collegamento in ingresso:
- The module is designed with reverse connection protection. If input polarity is reversed, the module will not operate but should not be damaged. Correct the polarity.
10. Applicazioni
The Aideepen 1800W DC-DC Boost Converter is versatile and can be used in various applications, including:
- High-power solar street lamp guida.
- Various LED lighting constant voltage (CV) driving.
- Vehicle-mounted and mobile device power supplies.
- DIY adjustable constant voltage (CV) and constant current (CC) power supplies.
- Solar power charging systems.
- Charging various types of batteries.
11. Garanzia e supporto
Each Aideepen product comes with a Garanzia di servizio di 24 mesi. If you encounter any quality issues with your item, you are eligible for a new replacement. For assistance with application, troubleshooting, or any other inquiries, please feel free to contact Aideepen customer support.
