Introduzione
The ACEBEAM L16 2.0 is a high-performance tactical flashlight designed for various applications, including hunting, camping, and general outdoor use. Featuring a Luminus SFT-40 LED, it delivers a maximum output of 2100 lumens and a beam distance of up to 670 meters. Its robust construction, dual-switch design, and USB-C charging capability make it a reliable tool for demanding environments. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your L16 2.0 flashlight.
Cosa c'è nella scatola
Dopo aver aperto la confezione, verificare che siano presenti tutti i seguenti componenti:
- ACEBEAM L16 2.0 Flashlight
- ACEBEAM 5000mAh 21700 Lithium-Ion Battery
- Cavo di ricarica USB-C
- cordino
- Fondina
- O-ring di ricambio
- Manuale dell'utente (questo documento)
Image: Contents of the ACEBEAM L16 2.0 package, including the flashlight, battery, charging cable, and holster.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Tipo di LED | Luminus SFT-40 6500K LED |
| Potenza massima | 2100 lumen |
| Distanza massima del raggio | 670 metri |
| Fonte di alimentazione | 1 x ACEBEAM 5000mAh 21700 Lithium-Ion Battery (Included) |
| Ricarica | USB-C ricaricabile |
| Materiale | A6061-T6 High-Quality Aluminum Alloy with HAIII Hard-Anodized Finish |
| Resistenza all'impatto | 1.5 metri |
| Grado di impermeabilità | IP68 (Submersible to 6.5 feet / 2 meters for 30 minutes) |
| Caratteristiche speciali | Dual Switch Design, Intuitive Grip, Quick Install Remote Switch Compatibility |
Impostare
Installazione della batteria
- Svitare il tappo posteriore della torcia in senso antiorario.
- Insert the included ACEBEAM 5000mAh 21700 battery with the positive (+) end facing towards the head of the flashlight.
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened to ensure proper electrical contact and water resistance.
Carica della batteria
The L16 2.0 features a built-in USB-C charging port for convenient recharging of the included battery.
- Locate the USB-C charging port on the flashlight body, typically covered by a rubber flap.
- Aprire delicatamente la linguetta di gomma per esporre la porta.
- Collegare il cavo di ricarica USB-C in dotazione alla porta della torcia.
- Connect the other end of the USB-C cable to a USB power source (e.g., wall adapter, computer USB port, power bank).
- The indicator light near the charging port will show the charging status (e.g., red for charging, green for fully charged).
- Una volta completata la ricarica, scollegare il cavo e chiudere saldamente la linguetta di gomma per mantenere la resistenza all'acqua.
Istruzioni per l'uso
Basic Operation (Tail Switch)
- momentaneo acceso: Half-press the tail switch for momentary illumination. Release to turn off.
- Accensione/spegnimento costanti: Fully press the tail switch until it clicks to turn the flashlight on or off.
Mode Selection (Side Switch)
When the flashlight is on (via the tail switch), use the side switch to cycle through different brightness modes.
- Modalità ciclo: With the light on, press and hold the side switch to cycle through Low, Medium, High, and Turbo modes. Release the switch at your desired brightness.
- Modalità strobo: Double-click the side switch quickly to activate Strobe mode. Double-click again to return to the previously used brightness mode.
- Modalità ultra bassa: From OFF, press and hold the side switch for 1 second to activate Ultra-Low mode.
- Funzione di memoria: The flashlight will remember the last used general brightness mode (Low, Medium, High, Turbo) when turned off and on again.
Design a doppio interruttore
The L16 2.0 features both a tail switch for tactical momentary/constant on/off and a side switch for mode selection and direct access to special modes. This dual control system provides versatile operation for different scenarios.
Remote Pressure Switch (Optional)
The L16 2.0 is compatible with an optional remote pressure switch for weapon-mounted applications. The quick installation feature allows you to insert the remote switch directly into the USB-C port without needing to unscrew the tail cap. Refer to the remote pressure switch's specific instructions for detailed usage.
Manutenzione
Proper maintenance ensures the longevity and optimal performance of your ACEBEAM L16 2.0 flashlight.
- Pulizia: Pulisci il corpo della torcia con un panno morbido eamp cloth. For stubborn dirt, a mild detergent can be used. Do not use abrasive cleaners or solvents.
- Filettature e O-ring: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance and smooth operation. Replace O-rings if they appear damaged or worn.
- Cura della batteria: Se la torcia non viene utilizzata per un periodo prolungato, rimuovere la batteria per evitare potenziali perdite. Conservare la batteria in un luogo fresco e asciutto.
- Porta di ricarica: Keep the USB-C charging port clean and free of debris. Ensure the rubber flap is securely closed when not charging to prevent water and dust ingress.
Risoluzione dei problemi
Se riscontri problemi con la torcia, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa/soluzione |
|---|---|
| La torcia non si accende. |
|
| Light flickers or cuts out. |
|
| L'indicatore di carica non funziona. |
|
Informazioni sulla sicurezza
Please read and follow these safety precautions to prevent injury or damage to the flashlight:
- Do Not Stare into Beam: The flashlight emits a powerful beam. Do not look directly into the light or shine it directly into the eyes of people or animals, as this can cause temporary blindness or permanent eye damage.
- Tenere fuori dalla portata dei bambini: This product is not a toy. Store the flashlight and its accessories out of reach of children.
- Sicurezza della batteria:
- Use only the recommended battery type (ACEBEAM 21700 5000mAh Lithium-Ion).
- Non mischiare batterie vecchie e nuove o diversi tipi di batterie.
- Do not dispose of batteries in fire or expose them to high temperatures.
- If the battery is damaged or leaking, handle it with care and dispose of it properly.
- Avviso di calore: The flashlight head may become hot during prolonged use at high output levels. Exercise caution when handling.
- Smontaggio: Do not attempt to disassemble the flashlight head or other sealed parts, as this may damage the light and void the warranty.
- Resistenza all'acqua: Ensure the tail cap and USB-C port cover are fully sealed before exposing the flashlight to water.
Garanzia e supporto
ACEBEAM products are manufactured with high-quality materials and craftsmanship. This product is typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official ACEBEAM websito per termini e condizioni di garanzia dettagliati.
For technical support, service, or inquiries regarding your ACEBEAM L16 2.0 Flashlight, please contact ACEBEAM customer service or visit the official ACEBEAM store online: