1. Prodotto finitoview
The BOTSLAB V9H is a versatile 4K 20MP camera designed for dual use as both an action camera and a dash cam. It features Electronic Image Stabilization (EIS) for smooth footage, a 170° wide-angle lens, and comes with a 64GB SD card. Its modular design allows for easy transition between sports mode and dash cam mode.
Image 1.1: The BOTSLAB V9H camera unit with its modular battery compartment, showcasing il suo design compatto.
Image 1.2: Illustration of the BOTSLAB V9H in its dual modes: as an action camera paired with the power module for outdoor activities, and as a dash cam mounted in a vehicle.
2. Configurazione e installazione
2.1 Installazione della dash cam
For dash cam functionality, the main camera unit is used without the battery compartment. Follow these steps for installation:
- Inserire la scheda di memoria: Insert the provided 64GB Micro SD card into the side slot of the dash cam unit. Ensure it clicks into place.
- Applica adesivo statico: Clean the desired area on your front windshield. Apply the static sticker to this position. This protects your windshield and allows for easy removal.
- Fissare il supporto per auto: Peel the adhesive backing from the car mount and firmly attach it to the static sticker on the windshield.
- Dash Cam sicura: Secure the dash cam unit to the car mount. Adjust the angle using the mount knob to ensure a clear view della strada.
- Cavo di alimentazione: Carefully route the power cable along the windshield, tucking it into the A-pillar trim using the provided install lever bar. Reinstall the seal.
- Connettiti all'alimentazione: Plug the power cable into the car charger and connect the car charger to your vehicle's cigarette lighter socket.
Video 2.1: A detailed guide on installing the BOTSLAB V9H in dash cam mode, covering memory card insertion, windshield mounting, cable routing, and power connection.
2.2 Action Cam Assembly (Cycling/Hiking)
For action camera use, the main unit attaches to the battery compartment. The accessory package includes various mounts for different activities.
2.2.1 Cycling Setup
- Attach Battery Compartment: Press the removal buttons on both sides of the battery compartment and attach it to the main camera unit until it clicks securely.
- Scegli l'adattatore: The accessory package includes two adapters. Choose the appropriate one based on your mounting needs.
- Connetti al monte: Connect the camera unit (with battery compartment) to the chosen mount adapter and tighten it.
- Regola l'angolo: Adjust the camera's angle using the adapter knob. Once set, tighten it securely.
- Fissaggio al manubrio: Use the knob to attach the large clip or bike clip to the bicycle handlebar. Secure the clip to the handlebar using the bottom knob.
2.2.2 Hiking Setup
- Attach Battery Compartment: Press the removal buttons on both sides of the battery compartment and attach it to the main camera unit until it clicks securely.
- Choose Base: The accessory package includes a base, three-way mount, and J-shaped base for installation. Choose the appropriate base.
- Attach to Chest Strap: Choose the appropriate base and attach it to the chest strap.
- Mount Action Cam: Mount the action cam onto the base.
- Use Backpack Clip: Alternatively, mount the action cam onto the backpack clip. Use the wrench to tighten the bolts. Rotate the backpack clip to the appropriate angle to complete the installation.
