SCT X4 Programmer Tool - Instruction Manual

Prodotto finitoview

The SCT X4 Programmer Tool, Model 7015PEO, is a high-performance scan tool designed to enhance vehicle performance and provide comprehensive diagnostic capabilities. It offers a user-friendly interface for quick and easy installation, allowing users to optimize their vehicle's engine for better fuel efficiency or increased horsepower.

This device is compliant with emissions regulations across all 50 states, ensuring legal and safe performance enhancements. It supports a wide range of Ford and Lincoln vehicles from 2011 to 2020, including popular models like the F150, Explorer, Expedition, and Lincoln Navigator.

Image: The SCT X4 Programmer Tool, showing its display, control buttons, and the included OBD-II cable and suction cup mount.

Configurazione e installazione

The SCT X4 Programmer Tool features a plug-and-play design for a hassle-free setup. Follow these steps to get started:

1. Prepara il tuo veicolo: Ensure your vehicle's ignition is turned off before connecting the device. This is crucial to prevent any potential issues during the programming process.
2. Collegare il dispositivo: Locate your vehicle's OBD-II port (typically under the dashboard on the driver's side). Plug the SCT X4 Programmer Tool's OBD-II cable securely into this port.
3. Accensione: Once connected, turn your vehicle's ignition key to the ON position (do not start the engine). The SCT X4 device should power on automatically.
4. Configurazione iniziale: The device may prompt you for initial setup steps, such as confirming vehicle information or checking for updates. Follow the on-screen instructions.
5. Backup Stock Tune: Before applying any new tunes, the device will guide you to save your vehicle's original stock tune. This backup is essential for returning your vehicle to its factory settings if needed.

Image: The SCT X4 Programmer's main menu, showing options like "Program Vehicle", "Gauges / Datalog", and "Vehicle Functions".

Istruzioni per l'uso

The SCT X4 Programmer Tool offers various functions to optimize and monitor your vehicle. Navigate through the menus using the directional pad and select button.

Programming Your Vehicle

To apply a performance tune:

1. Dal menu principale, seleziona "Program Vehicle".
2. Confirm any on-screen notices regarding street use or legal compliance.
3. Ensure the ignition is in the ON position (engine off) as prompted.
4. The device will process data and then display available tunes (e.g., 87 Perf, 93 Race).
5. Select your desired tune and follow the prompts to complete the programming. The device will save your stock tune automatically before applying the new one.

Registrazione e monitoraggio dei dati

The X4 allows for high-speed data logging and real-time monitoring of various vehicle parameters:

• Dal menu principale, seleziona "Gauges / Datalog".
• Puoi view parameters such as Engine RPM, Boost PSI, Coolant Temp, Voltage, Air/Fuel Ratio, and more.
• This feature helps in making informed adjustments and optimizing vehicle performance.

Image: The SCT X4 Programmer Tool showing a screen with various real-time vehicle data points like engine RPM, boost pressure, and temperatures.

Vehicle Functions and Diagnostics

The device can also read and clear Diagnostic Trouble Codes (DTCs), effectively acting as a check engine light reader.

• Dal menu principale, seleziona "Vehicle Functions".
• Scegliere "Read DTC Codes" to identify any active trouble codes.
• Scegliere "Clear DTC Codes" to clear codes after addressing the underlying issue.
• IL "Informazioni sul veicolo" option provides detailed information about your specific vehicle.

Manutenzione

To ensure the longevity and optimal performance of your SCT X4 Programmer Tool, follow these maintenance guidelines:

• Mantenere pulito: Pulisci il dispositivo con un panno morbido e asciutto. Evita di utilizzare prodotti chimici aggressivi o detergenti abrasivi.
• Conservare correttamente: Quando non in uso, conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Cura del cavo: Handle the OBD-II cable carefully. Avoid bending or crimping it excessively, as this can damage the internal wires.
• Aggiornamenti software: Regularly check the SCT website for firmware updates. Keeping your device updated ensures compatibility with new vehicles and optimal performance.

Risoluzione dei problemi

If you encounter issues with your SCT X4 Programmer Tool, refer to the following common solutions:

Image: A detailed compatibility chart for the SCT X4 Programmer Tool (Model 7015PEO), listing supported Ford and Lincoln vehicle models, years, and engine types.

Specifiche

• Numero modello: 7015PEO
• Marca: SCT
• Peso dell'articolo: 13.7 once
• Dimensioni della confezione: 7.13 x 6.81 x 4.06 pollici
• Compatibilità del veicolo: Specifically designed for Ford and Lincoln vehicles (2011-2020), including F150, Explorer, Expedition, and Lincoln Navigator.
• Opzioni di ottimizzazione: Customizable performance options for fuel efficiency or increased horsepower. Supports pre-loaded and custom tunes.
• Registrazione dei dati: High-speed data logging and real-time monitoring of vehicle parameters.
• Diagnostica: Legge e cancella i codici di errore diagnostici (DTC).
• Conformità legale: 50 State Legal (emissions compliant).

Garanzia e supporto

SCT products are manufactured to high standards. For specific warranty details, please refer to the documentation included with your product or visit the official SCT websito. I piani di protezione potrebbero anche essere disponibili per l'acquisto separatamente.

For technical support, troubleshooting assistance, or to inquire about custom tunes, please visit the official SCT Store or contact their customer service directly. You can find more information and resources at the SCT Store on Amazon.