1. Prodotto finitoview
The Xhorse 1.5mm Milling Cutter is a precision-engineered accessory designed for use with Xhorse automatic key cutting machines. This cutter is essential for accurately duplicating and cutting various types of keys, ensuring high precision and durability.
It is specifically designed to work seamlessly with the Condor XC-Mini Plus, Condor XC-Mini Plus II, Condor XC-002, Dolphin XP005, Dolphin XP005L, and Dolphin XP007 key cutting machines.
Image: A set of five Xhorse 1.5mm milling cutters, each housed in its protective plastic case, ready for use.
2. Compatibilità
This 1.5mm milling cutter is compatible with the following Xhorse key cutting machine models:
- Condor XC-Mini Plus
- Condor XC-Mini Plus II
- Condor XC-002
- Delfino XP005
- Delfino XP005L
- Delfino XP007
Image: Various Xhorse key cutting machines, including Condor XC-Mini Plus, Condor XC-Mini Plus II, Dolphin XP005, and Dolphin XP005L, illustrating the range of compatible devices.
3. Specifiche
| Specificazione | Dettaglio |
|---|---|
| Misurare | 1.5mm |
| Materiale | Carburo |
| Numero di flauti | 2 |
| Tipo di taglio finale | Fine della palla |
| Tipo di taglio | Non-Center Cutting |
| Numero di bordi di taglio | 5 |
| Tipo di finitura | Incompiuto |
| Tolleranza mantenuta | Precisione |
| Peso dell'articolo | 2.39 once |
| Dimensioni del pacco | 3.11 x 2.05 x 0.43 pollici |
| Paese di origine | Cina |
| Numero di modello | HKSL25 |
Image: A visual comparison of various Xhorse cutters and probes, highlighting the distinct features and sizes, including the 1.5mm milling cutter.
4. Configurazione e installazione
Proper installation of the milling cutter is crucial for accurate key cutting and to prevent damage to the machine or cutter.
- Power Off Machine: Ensure your Xhorse key cutting machine is powered off and unplugged before attempting any installation or removal of components.
- Locate Cutter Clamp: Identify the cutter clamp on your machine's cutting head. Refer to your specific machine's user manual for exact location if unsure.
- Allentare Clamp Vite: Use the appropriate tool (usually an Allen wrench) to loosen the screw that secures the existing cutter or holds the empty clamp. Do not remove the screw completely.
- Rimuovere la vecchia fresa (se applicabile): Carefully pull out the old cutter from the clamp. Dispose of worn or damaged cutters responsibly.
- Inserisci nuova fresa: Insert the new 1.5mm milling cutter into the clamp. Ensure it is seated firmly and correctly aligned. The cutter should be inserted to the proper depth as indicated by your machine's guidelines or the cutter's design.
- Stringere Clamp Vite: While holding the cutter in place, tighten the clamp screw securely. Do not overtighten, as this can damage the cutter or the clamp.
- Verifica installazione: Gently tug on the cutter to ensure it is firmly held and does not wobble.
Image: The 1.5mm milling cutter correctly installed in an Xhorse key cutting machine, positioned alongside the machine's probe, demonstrating readiness for key cutting operations.
5. Istruzioni per l'uso
Once the 1.5mm milling cutter is installed, follow your key cutting machine's specific operating procedures. This cutter is designed for precision cutting of various key types.
- Calibrazione: After installing a new cutter, it is recommended to perform a machine calibration or cutter height adjustment as per your machine's manual to ensure optimal cutting accuracy.
- Chiave Clampin: Sicuro clamp the key blank in the appropriate jaw of your key cutting machine. Ensure the key is stable and correctly aligned.
- Selezione del software: Select the correct key type and cutting parameters in your machine's software interface. Verify that the software recognizes the 1.5mm cutter if automatic detection is available.
- Processo di taglio: Initiate the cutting process through the machine's interface. Monitor the cutting operation to ensure smooth and accurate key duplication.
- Post-Cutting Inspection: After cutting, carefully remove the key and inspect it for accuracy and finish. Deburr if necessary.
Immagine: Un dettaglio view of the Xhorse milling cutter engaged in the key cutting process, showcasing its precise interaction with the key blank within the machine.
6. Manutenzione
Regular maintenance of your milling cutter will extend its lifespan and ensure consistent cutting quality.
- Pulizia: After each use, use a soft brush or compressed air to remove any metal shavings or debris from the cutter and the surrounding area of the machine.
- Ispezione: Periodically inspect the cutter for signs of wear, chipping, or damage. A dull or damaged cutter can lead to inaccurate cuts and potential machine strain.
- Magazzinaggio: When not in use, store the milling cutter in its protective plastic case to prevent damage and keep it clean. Store in a dry, cool place.
- Sostituzione: Replace the cutter when it shows significant signs of wear or when cutting quality deteriorates. The lifespan of a cutter depends on the material being cut and frequency of use.
7. Risoluzione Dei Problemi
If you encounter issues while using the 1.5mm milling cutter, consider the following common problems and solutions:
- Poor Cutting Quality / Rough Edges:
- Causa: Worn or dull cutter.
- Soluzione: Replace the milling cutter.
- Causa: Incorrect calibration or cutter height.
- Soluzione: Perform machine calibration or adjust cutter height according to your machine's manual.
- Causa: Key blank not securely clamped.
- Soluzione: Ensure the key blank is firmly and correctly clamped in the machine's jaws.
- Cutter Breaking Frequently:
- Causa: Overtightening the clamp screw during installation.
- Soluzione: Garantire il clamp screw is tightened securely but not excessively.
- Causa: Cutting material that is too hard for the cutter.
- Soluzione: Verify the cutter is suitable for the key blank material.
- Causa: Machine vibration or misalignment.
- Soluzione: Check machine stability and perform a full machine calibration.
- Cutter Not Recognized by Machine:
- Causa: Installazione impropria.
- Soluzione: Re-install the cutter, ensuring it is fully seated.
- Causa: Problema software.
- Soluzione: Restart the machine and its software. Update machine firmware if available.
8. Garanzia e supporto
For warranty information and technical support regarding your Xhorse 1.5mm Milling Cutter or compatible key cutting machines, please refer to the official Xhorse website or contact your authorized Xhorse dealer.
Keep your purchase receipt or proof of purchase for any warranty claims.
