Manuale di istruzioni per il supporto accessorio con base da pavimento ADJ Accu Stand VFB1

1. Introduzione

The ADJ Accu Stand VFB1 is a robust and versatile floor base designed for vertically mounting compatible lighting fixtures. This manual provides essential information for the safe and effective setup, operation, and maintenance of your VFB1 floor base.

Caratteristiche principali:

• Designed to vertically mount up to four (4) ElectraPix Bar 8 fixtures or two (2) ElectraPix Bar 16 fixtures.
• Constructed from durable steel for stability and longevity.
• Compact dimensions for efficient use of space.

2. Contenuto della confezione

Please inspect the package contents upon receipt to ensure all components are present and undamaged.

• 1 x ADJ Accu Stand VFB1 Floor Base
• Mounting hardware (screws, washers, nuts) for attaching brackets and fixtures (may be pre-attached or included separately).

3. Installazione e assemblaggio

Follow these steps to properly assemble and set up your Accu Stand VFB1 Floor Base.

3.1 Disimballaggio

1. Carefully remove the floor base and all components from the packaging.
2. Conservare l'imballaggio per eventuali trasporti o immagazzinamenti futuri.

3.2 Gruppo base

The VFB1 floor base typically comes with its mounting brackets pre-attached. If not, secure the two vertical mounting brackets to the base plate using the provided screws and nuts. Ensure they are firmly tightened for stability.

Figura 1: Oltreview of the ADJ Accu Stand VFB1 Floor Base with its two vertical mounting brackets.

Figura 2: In basso view of the VFB1 base, illustrating the placement of rubber feet and screw points for secure assembly.

3.3 Mounting Fixtures

1. Position the ElectraPix Bar fixture(s) onto the vertical mounting brackets. The brackets feature keyhole slots designed to align with the fixture's mounting points.
2. Secure the fixture(s) to the brackets using the appropriate screws or quick-release mechanisms provided with your ElectraPix Bar fixtures. Ensure all connections are tight and secure to prevent accidental dislodgement.
3. Verify that the fixture is stable and vertically aligned before operation.

Figure 3: Close-up of a fixture's mounting point attached to the VFB1 bracket, demonstrating the secure connection.

Figure 4: An ADJ ElectraPix Bar 16 fixture shown mounted vertically on the VFB1 Floor Base.

Figure 5: The VFB1 Floor Base supporting an illuminated ElectraPix Bar 16 fixture, demonstrating its intended use.

4. Linee guida operative

The Accu Stand VFB1 is a passive accessory. Proper operation primarily involves ensuring stable placement and adherence to safety guidelines.

• Posizionamento stabile: Always place the floor base on a flat, level, and stable surface to prevent tipping.
• Distribuzione del peso: Ensure that the weight of the mounted fixtures is evenly distributed and does not exceed the base's stability limits.
• Liquidazione: Maintain adequate clearance around the base and mounted fixtures to prevent obstruction or accidental impact.
• Connessioni sicure: Regularly check that all fixtures are securely attached to the mounting brackets.

5. Manutenzione

Regular maintenance helps ensure the longevity and safe operation of your VFB1 floor base.

• Pulizia: Wipe the base with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Ispezione: Periodically inspect the base for any signs of damage, such as bends, cracks, or loose fasteners. Ensure the rubber feet are intact.
• Elementi di fissaggio: Check and tighten any loose screws or bolts on the mounting brackets and base plate.

6. Risoluzione Dei Problemi

This section addresses common issues you might encounter with the Accu Stand VFB1 Floor Base.

• Problema: The base feels unstable or wobbly.
  Soluzione: Ensure the base is placed on a completely flat and level surface. Check that all mounting hardware for the brackets and fixtures are securely tightened. Verify that the rubber feet are present and making full contact with the floor.
• Problema: Fixtures are difficult to mount or do not fit.
  Soluzione: Confirm that the fixtures you are attempting to mount are compatible with the VFB1 base (e.g., ElectraPix Bar 8 or 16). Ensure you are aligning the fixture's mounting points correctly with the keyhole slots on the brackets. Do not force fixtures into place.

7. Specifiche

8. Garanzia e supporto

For warranty information or technical support regarding your ADJ Accu Stand VFB1 Floor Base, please refer to the warranty card included with your purchase or visit the official ADJ Products website. You may also contact ADJ customer service directly for assistance.