Introduzione
Thank you for choosing the JZAQ BT40 Motorcycle Helmet Bluetooth Headset. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:
- 1 x Helmet Headset (BT40)
- 6 x Headphone VELCRO (Adhesive Pads)
- 1 cavo di ricarica USB
- 1 x Manuale utente
- 2 x Noise Reducing Sponge Heads (Microphone Covers)
Image: The JZAQ BT40 Helmet Bluetooth Headset, including the main unit with speakers and microphone, USB charging cable, and various adhesive pads and microphone covers.
Specifiche
| Nome del modello | Modello BT40 |
| Versione Bluetooth | Versione 5.0+EDR |
| Distanza Bluetooth | Fino a 10 metri (33 piedi) |
| Tipo di batteria | Batteria al litio da 3.7 V/600 mA |
| Tempo di ricarica | Circa 2 ore |
| Tempo di standby | Fino a 500 ore |
| Working Time (Playtime/Talk Time) | Fino a 90 ore |
| Resistenza all'acqua | IP67 Deep Waterproof Technology |
| Headphone Thickness | 0.35 pollici (circa 9 mm) |
| Controllo del rumore | DSP Noise Cancelling Technology |
| Dispositivi compatibili | Smartphones, MP3 Players, GPS Devices |
Image: A diagram illustrating the dimensions of the headset's earpieces, speaker, microphone, and control unit, highlighting the 0.35-inch thickness of the earpieces.
Configurazione e installazione
Follow these steps to properly install the BT40 headset into your helmet:
- Prepare Earphones: Take the helmet headphones from the box. Attach the "Magic Tape" (Velcro adhesive pads) to the back of both earphones.
- Position Earphones: Remove the protective tape paper from the Velcro on the earphones. Carefully position and stick the earphones into the helmet's ear recesses on both sides. Ensure proper alignment before pressing firmly.
- Secure Headset: Once the Velcro is attached to the helmet, secure the headset earphones to these Velcro pads.
- Posizionamento del microfono: Position the microphone arm so that the microphone is close to your mouth for clear communication.
- Controllo finale: Ensure all components are securely attached and comfortable within the helmet.
Nota importante: Before ordering, please check the inner size of your helmet to ensure a comfortable fit for the headset. The headset's ultra-thin design (0.35 inches) is suitable for most helmets without causing discomfort.
Image: The BT40 headset featuring its ultra-thin speakers, designed to fit comfortably within helmet ear spaces without squeezing the ears.
Image: A motorcycle helmet with the JZAQ BT40 headset microphone arm visible, demonstrating typical installation.
Istruzioni per l'uso
Accensione/spegnimento e associazione
- Accensione: Press and hold the Power button (usually the middle button on the control unit) until the indicator light illuminates.
- Spegni: Premere e tenere premuto il pulsante di accensione finché la spia non si spegne.
- Abbinamento: When powered on for the first time or when entering pairing mode, the headset will automatically search for Bluetooth devices. On your smartphone or other Bluetooth-enabled device, search for "BT40" in the Bluetooth settings and select it to connect.
- Connessione automatica: After initial pairing, the headset will automatically connect to the last paired device when powered on, if the device is within range.
Gestione delle chiamate
- Rispondi alla chiamata: The headset supports automatic answering of incoming calls.
- Termina chiamata: Press the Power button once to end an active call.
- Rifiuta chiamata: Press and hold the Power button for approximately 2 seconds to reject an incoming call.
Riproduzione musicale
- Riproduci/Pausa: Premere una volta il pulsante di accensione per riprodurre o mettere in pausa la musica.
- Aumenta volume: Premere il pulsante "+" per aumentare il volume.
- Volume basso: Premere il pulsante "-" per diminuire il volume.
- Prossima canzone: Press and hold the "+" button for approximately 2 seconds to skip to the next track.
- Canzone precedente: Press and hold the "-" button for approximately 2 seconds to go to the previous track.
Assistente vocale
- Attiva l'assistente vocale: Double-click the Power button to activate your smartphone's voice assistant (e.g., Siri, Google Assistant).
Immagine: Un dettaglio view of the headset's control unit, showing the volume up (+), power/play/pause, and volume down (-) buttons, along with the microphone.
Video: Un oltreview of the JZAQ Motorcycle Helmet Bluetooth Headset BT40, demonstrating its components and basic features.
Manutenzione
- Pulizia: Per pulire le cuffie, utilizzare un panno morbido e asciutto. Evitare l'uso di prodotti chimici aggressivi o materiali abrasivi.
- Esposizione all'acqua: While the headset is IP67 waterproof, prolonged submersion or exposure to high-pressure water jets should be avoided. Ensure the charging port cover is securely closed when not charging.
- Magazzinaggio: Conservare le cuffie in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Cura della batteria: Per prolungare la durata della batteria, evitare di scaricarla completamente frequentemente. Caricare regolarmente le cuffie, anche se non vengono utilizzate per periodi prolungati.
- Spugna per microfono: Replace the noise-reducing sponge head on the microphone if it becomes worn or damaged to maintain optimal voice clarity.
Image: The BT40 headset with water droplets, demonstrating its IP67 deep waterproof capability, suitable for use in rainy or snowy conditions.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'auricolare non si accende. | Batteria scarica. | Charge the headset for at least 2 hours using the provided USB cable. |
| Impossibile associare il dispositivo. | Bluetooth is off on the device; headset is not in pairing mode; too far from device. | Ensure Bluetooth is enabled on your device. Make sure the headset is powered on and in pairing mode. Move the headset closer to the device (within 10 meters). Try restarting both devices. |
| Nessun suono o volume basso. | Volume too low on headset or connected device; improper connection. | Increase volume using the "+" button on the headset and on your connected device. Re-pair the headset with your device. |
| Il microfono non rileva chiaramente la voce. | Microphone not positioned correctly; damaged sponge cover. | Adjust the microphone arm so the microphone is close to your mouth. Replace the noise-reducing sponge head if it is worn. |
| Connessione intermittente. | Interferenza; dispositivo troppo lontano; batteria scarica. | Move away from sources of strong electromagnetic interference. Ensure the headset is within 10 meters of the connected device. Charge the headset. |
Garanzia e supporto
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official JZAQ website. If you experience any dissatisfaction or issues, please contact customer service for assistance.
Contatto: Please refer to your purchase documentation or the seller's information on the platform where you purchased the product.
