Informazioni importanti sulla sicurezza
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Seguire sempre attentamente le istruzioni di montaggio per evitare instabilità o crolli.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Non superare la capacità di peso massima di 3500 libbre.
Contenuto della confezione
Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti.
- Box Spring Frame Components
- Copertura del tessuto
- Manuale di installazione
- Viti
- Chiave
Installazione e assemblaggio
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Strumenti necessari:
- Chiave inclusa
- (Optional) Power screwdriver for faster assembly
Fasi di assemblaggio:
- Disimballare i componenti: Estrarre con cautela tutti i componenti dall'imballaggio e disporli su una superficie pulita e piana. Assicurarsi che tutti i componenti elencati siano presenti.
- Aprire la cornice: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Connessioni sicure: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Installare le doghe: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Applicare la copertura in tessuto: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Istruzioni per l'uso
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Posizionamento: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Posizionamento del materasso: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Capacità di peso: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Riduzione del rumore: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Manutenzione e cura
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Pulizia della copertura: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Pulizia del telaio: Pulisci la struttura metallica con un panno asciutto per rimuovere polvere e detriti. Evita di utilizzare prodotti chimici aggressivi o detergenti abrasivi.
- Ispezione regolare: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Risoluzione dei problemi
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| rumore stridulo | Collegamenti allentati o posizionamento non uniforme. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Instabilità/oscillazione | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Materasso cedevole | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Maf-Ma ... |
| Numero di modello | MAF-MT33-10K |
| Misurare | Re |
| Dimensioni del prodotto | 78.8 cm L x 75.5 cm P x 10 cm A |
| Dimensioni del materasso compatibili | 80"L x 76"W |
| Caratteristica speciale | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Tipo di finitura | Verniciato a polvere |
| Componenti inclusi | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Istruzioni per la cura del prodotto | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Assemblaggio richiesto | SÌ |
| Distanza da terra all'oggetto | 10 pollici |
| Peso dell'articolo | 49.1 libbre |
| Capacità massima di peso | 3500 libbre |
Figure 5: MAF Box Spring Size Chart.
Garanzia e supporto
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
