upHere UP1 Series CPU Air Cooler Instruction Manual

1. Prodotto finitoview

The upHere UP1 Series CPU Air Cooler is designed to provide efficient cooling for your CPU. It features four 6mm copper heat pipes and a 120mm PWM fan, ensuring optimal thermal performance while maintaining quiet operation. This cooler is compatible with a wide range of Intel and AMD sockets, offering broad applicability for various PC builds.

Caratteristiche principali:

• Compatibilità universale: Supports Intel LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066 (X79/X99) and AMD AM5/AM4/AM3/AM2/FM2/FM1 series sockets.
• Prestazioni di raffreddamento eccezionali: Features four 6mm heat pipes for efficient heat dissipation and a direct heat pipe contact area of 25mm.
• Funzionamento silenzioso: Equipped with a 120mm fan operating at a maximum speed of 1650rpm ±10%, delivering 68.2CFM airflow with noise levels below 26dB(A).
• Easy Installation & RAM Clearance: Designed for non-disassembly fan installation and provides clearance for tall RAM modules.
• Versatile Power Connectivity: Utilizes a 4-pin power port and operates at 12V.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di procedere con l'installazione:

• upHere UP1 Series CPU Air Cooler (Heatsink with 120mm Fan)
• Intel Mounting Kit (Backplate, brackets, screws)
• AMD Mounting Kit (Brackets, screws)
• Pasta termica
• Thermal Paste Spatula
• Guida per l'utente

3. Guida all'installazione

Follow these steps carefully to install your upHere UP1 Series CPU Air Cooler. Ensure your system is powered off and unplugged before beginning.

3.1. Preparare la scheda madre

Depending on your CPU socket type (Intel or AMD), select the appropriate mounting hardware.

For Intel Sockets (LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066):

1. Attach the universal backplate to the rear of the motherboard, aligning the holes with the CPU socket. Adjust the backplate clips for your specific socket type (e.g., 115X/1200, 1700, 1366).
2. Secure the Intel mounting brackets to the front of the motherboard using the provided screws. Tighten them evenly.

For AMD Sockets (AM5/AM4/AM3/AM2/FM2/FM1):

1. Remove the existing plastic retention modules from the motherboard, but retain the original AMD backplate.
2. Install the AMD mounting brackets onto the motherboard, aligning them with the backplate screw holes. Secure them with the provided screws.

3.2. Applicare la pasta termica

Apply a small amount of thermal paste (pea-sized dot) to the center of your CPU's integrated heat spreader (IHS). Use the provided spatula to spread it evenly into a thin layer across the entire surface of the IHS.

Immagine: The cooler features four pure copper direct contact heat pipes designed to efficiently transfer heat from the CPU.

3.3. Mount the CPU Cooler

1. Rimuovere la pellicola protettiva dalla base del frigorifero.
2. Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler with the standoffs or brackets on the motherboard.
3. Using a screwdriver, tighten the screws on the cooler in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.

Immagine: The cooler is designed for easy installation from above, without needing to remove the fan.

3.4. Connect the Fan Cable

Locate the 4-pin CPU fan header on your motherboard (usually labeled 'CPU_FAN' or similar). Connect the cooler's 4-pin PWM cable to this header.

Immagine: The 4-pin power connector ensures compatibility with various motherboard configurations.

4. Istruzioni per l'uso

Once installed, the upHere UP1 Series CPU Air Cooler operates automatically based on your motherboard's fan control settings. The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed according to CPU temperature, optimizing for both cooling performance and noise levels.

Fan Speed and Noise:

• The 120mm fan operates within a speed range of 600-1650 RPM ±10%.
• At maximum speed, the fan delivers an airflow of 68.2 CFM.
• Noise levels are kept below 26 dB(A) for quiet operation.

Immagine: Performance specifications of the PWM fan, highlighting quiet and efficient cooling.

5. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e longevità del dissipatore della CPU.

• Rimozione della polvere: Pulire periodicamente le alette del dissipatore e le pale della ventola per evitare l'accumulo di polvere, che può ostacolare il flusso d'aria e ridurre l'efficienza di raffreddamento. Utilizzare aria compressa o una spazzola morbida.
• Pasta termica: Reapply thermal paste if you remove the cooler for any reason, or if you notice a significant increase in CPU temperatures over time.
• Ispezione della ventola: Check the fan for any unusual noises or wobbling. If the fan is damaged or excessively noisy, consider replacing it.

6. Risoluzione Dei Problemi

If you encounter issues with your CPU cooler, refer to the following common troubleshooting steps:

• La ventola non gira: Ensure the 4-pin PWM cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS/UEFI settings to confirm fan control is enabled and configured correctly.
• Temperature elevate della CPU: Verify that the cooler is properly seated on the CPU and that the mounting screws are tightened evenly. Ensure sufficient thermal paste was applied. Check for adequate airflow within your PC case.
• Rumore eccessivo: Confirm that the fan blades are free from obstructions. Check if the fan is securely mounted and not vibrating against other components. Adjust fan speed settings in BIOS/UEFI if necessary.
• Problemi di compatibilità: Double-check that your motherboard socket is listed as compatible with this cooler.

If problems persist, contact upHere customer support for further assistance.

7. Specifiche

Detailed technical specifications for the upHere UP1 Series CPU Air Cooler:

Immagine: Detailed technical specifications and physical dimensions of the cooler.

8. Garanzia e supporto

upHere products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official upHere websito o contattare il loro servizio clienti.

Conservare la prova d'acquisto per eventuali richieste di garanzia.