DDPAI N3 Pro Dash Cam doppia

1. Introduzione

This manual provides instructions for the installation, operation, maintenance, and troubleshooting of the DDPAI N3 Pro Dual Dash Cam. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• DDPAI N3 Pro Dash Cam (Front Unit)
• Telecamera posteriore 1080P
• Caricabatterie per auto
• Charging Cable (9.84ft)
• Staffa
• Strumento di installazione (leva)
• Manuale d'uso
• 2" 3M Stickers
• Stickers (for cable management)

3. Prodotto finitoview

The DDPAI N3 Pro is a dual dash camera system designed for vehicle surveillance, featuring a front camera and a rear camera. The front camera records in 2.5K (1600P) resolution with a 140° wide-angle lens, and the rear camera records in 1080P resolution with a 125° wide-angle lens.

4. Guida all'installazione

4.1 Installazione della fotocamera frontale

1. Pulisci la zona del parabrezza dove verrà montata la dash cam. Assicurati che sia priva di polvere e grasso.
2. Attach the adhesive pad to the bracket, then attach the bracket to the front dash cam.
3. Remove the protective film from the adhesive pad and firmly press the dash cam onto the chosen location on the windshield, typically behind the rearview mirror. Hold for 30 seconds.
4. Regolare l'angolazione dell'obiettivo per assicurarsi che catturi chiaramente la strada davanti a sé.

4.2 Installazione della telecamera posteriore

1. Identify a suitable location on the rear windshield, ensuring a clear view and avoiding obstruction by defroster lines.
2. Pulire accuratamente la zona scelta.
3. Attach the adhesive pad to the rear camera and mount it firmly on the rear windshield.
4. Connect the rear camera cable to the front dash cam's AV-IN port.

4.3 Cablaggio

1. Connect the charging cable to the front dash cam's power input.
2. Route the charging cable along the edge of the windshield, down the A-pillar, and to the vehicle's 12V power outlet (cigarette lighter socket). Use the included pry tool to tuck the cable neatly under the trim.
3. Plug the car charger into the 12V power outlet.
4. Route the rear camera cable from the front dash cam to the rear camera, tucking it along the headliner and side panels.

5. Istruzioni per l'uso

5.1 Accensione/spegnimento

The dash cam automatically powers on and begins recording when the vehicle's ignition is turned on and power is supplied to the 12V outlet. It powers off automatically when the ignition is turned off.

5.2 Funzioni di registrazione

• Registrazione in loop: The camera records continuously in short segments (e.g., 1, 3, or 5 minutes). When the memory card is full, the oldest files are automatically overwritten by new recordings. The device supports up to 256GB TF cards (not included).
• G-Sensor Protection: The built-in G-sensor detects sudden impacts or collisions. In such an event, the current recording segment is automatically locked and protected from being overwritten, preserving critical footage.

5.3 Modalità di parcheggio 24 ore su 24

For continuous surveillance when the vehicle is parked, the 24-hour parking mode can be activated. This feature requires a dedicated Type-C hardwire kit (ASIN: B0D12D7HSC, not included) to provide constant power to the dash cam. Parking mode typically uses low FPS recording or collision detection to conserve power and storage.

5.4 Controllo Wi-Fi e app

The DDPAI N3 Pro features built-in Wi-Fi for wireless connectivity to your smartphone. Download the DDPAI app (available on iOS and Android) to:

• View cibo vivotage da entrambe le telecamere.
• Scarica i video registrati sul tuo telefono.
• Gestisci le impostazioni della dash cam.
• Eseguire gli aggiornamenti del firmware.

5.5 Visione notturna

The dash cam incorporates an advanced CMOS sensor, a large F1.8 aperture, a 5-layer optical lens, and WDR (Wide Dynamic Range) technology to improve clarity in low-light conditions. This system automatically adjusts exposure to capture clear and detailed footage during nighttime driving.

6. Manutenzione

• Pulizia: Utilizzare un panno morbido e asciutto per pulire le lenti e il corpo della fotocamera. Evitare l'uso di detergenti abrasivi o solventi.
• Aggiornamenti del firmware: Regularly check for and install firmware updates via the DDPAI app to ensure optimal performance and access to new features.
• Scheda di memoria: Format the memory card periodically (e.g., once a month) using the dash cam's settings to maintain its performance and prevent data corruption. Replace the memory card if it shows signs of degradation or errors.
• Temperatura: Evitare di esporre la dash cam a temperature estreme per periodi prolungati.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

The DDPAI N3 Pro Dash Cam comes with an 18-month warranty. DDPAI provides lifetime technical assistance for this product.

Per l'assistenza clienti, contattare:

• E-mail: servicecenter@ddpai.com
• Customer support typically responds within 24 hours (Mon-Fri, 5 PM - 11:59 PM PST).