Introduzione
This manual provides detailed instructions for the 8BitDo Ultimate Mini Wired Controller for Xbox. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. This controller is officially licensed for Xbox and compatible with Xbox Series X|S, Xbox One, and Windows 10/11.
Impostare
The 8BitDo Ultimate Mini Wired Controller is designed for simple plug-and-play functionality. Follow these steps to connect your controller:
- Ensure your Xbox console (Xbox Series X|S, Xbox One) or Windows PC (Windows 10/11) is powered on.
- Locate an available USB port on your console or PC.
- Connect the USB-C end of the provided cable to the controller and the USB-A end to your console or PC.
- The controller will automatically be detected and configured. The Xbox button on the controller will illuminate to indicate a successful connection.
- For audio, connect a standard CTIA connector 3.5mm headset to the audio jack located on the controller.
The controller is now ready for use. No additional drivers are typically required for supported systems.
Funzionamento del controller
The 8BitDo Ultimate Mini Wired Controller features a standard layout with several advanced functionalities:
- Joystick ad effetto Hall: These joysticks provide enhanced precision and durability, reducing drift over time.
- Trigger di impulsi: Experience tactile feedback with vibration in the triggers, adding immersion to your gameplay.
- Paraurti e D-pad migliorati: Designed for a responsive and tactile feel, ensuring accurate inputs.
- Crystal Action Buttons: Durable and clear action buttons for a consistent feel.
RGB Lighting Fire Ring
The controller features interactive RGB lighting around the joysticks, known as the 'Fire Ring'. This lighting can be adjusted through multiple modes:
- Fire Ring Mode: Displays a dynamic lighting effect.
- Light-tracing Mode: Follows your joystick movements with light.
- Rainbow Ring Mode: Passa attraverso uno spettro di colori.
To cycle through the lighting modes or turn off the lighting, locate the small button positioned below the right analog stick. Press this button to change modes or deactivate the lighting as desired.
Manutenzione
Proper maintenance ensures the longevity and performance of your 8BitDo Ultimate Mini Wired Controller:
- Pulizia: Utilizzare un panno morbido e asciutto per pulire la superficie del controller. Per lo sporco ostinato, leggermente dampImmergere il panno in acqua. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi, poiché potrebbero danneggiare la finitura e i componenti interni del controller.
- Magazzinaggio: Conservare il controller in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme. Evitare di posizionare oggetti pesanti sopra il controller.
- Cura del cavo: Handle the USB-C cable gently. Avoid sharp bends, kinks, or pulling the cable forcefully from the port. If the cable becomes damaged, replace it with a compatible USB-C cable to ensure proper functionality and safety.
Risoluzione dei problemi
Se riscontri problemi con il controller, fai riferimento alle seguenti soluzioni comuni:
- Il controller non risponde:
- Assicurarsi che il cavo USB sia collegato saldamente sia al controller che alla console/PC.
- Prova a collegare il controller a una porta USB diversa.
- Test the controller on another compatible device (if available) to determine if the issue is with the controller or the original device.
- Riavvia la console o il PC.
- Lighting Issues (Too Bright/Not Working):
- Press the small button located below the right analog stick to cycle through lighting modes or turn the lighting off/on. Repeated presses will change the effect or brightness.
- Jack audio non funzionante:
- Ensure your headset uses a standard CTIA connector.
- Verify the headset is fully plugged into the 3.5mm audio jack on the controller.
- Provare l'auricolare con un altro dispositivo per confermare che funzioni correttamente.
- Input Lag o disconnessioni:
- Ensure the USB cable is not damaged. Replace if necessary.
- Avoid using USB hubs if possible; connect directly to the console/PC.
Se questi passaggi non risolvono il problema, consultare la sezione Supporto per ulteriore assistenza.
Specifiche
| Caratteristica | Descrizione |
|---|---|
| Numero di modello | 6922621507000 |
| Connettività | Wired USB (USB-C to USB-A) |
| Compatibilità | Xbox Serie X|S, Xbox One, Windows 10/11 |
| Caratteristiche speciali | Hall Effect Joysticks, Impulse Triggers, RGB Lighting Fire Ring (multiple modes), Refined Bumpers and D-pad, 3.5mm Audio Jack (CTIA standard), Crystal Action Buttons |
| Dimensioni | 7.48 x 5.51 x 0.79 pollici (189.9 x 140 x 20 mm) |
| Peso | 11.99 once (340 grammi) |
Garanzia e supporto
Informazioni sulla garanzia: This product comes with a manufacturer's warranty. Please refer to the warranty card included in the product packaging or visit the official 8BitDo websito per termini e condizioni di garanzia dettagliati.
Assistenza clienti: For technical assistance, product inquiries, or warranty claims, please visit the official 8BitDo support page or contact their customer service through the contact information provided on their website. Ensure you have your product model number (6922621507000) and proof of purchase available when contacting support.