1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of the CISA 604 Series Door Closer. Designed for effective and reliable door closure, this model is suitable for doors weighing up to 85 kg and up to 1100 mm wide. Please read these instructions carefully before installation and use to ensure proper function and safety.
Image 1.1: The CISA 604 Series Door Closer in dark brown finish, showing the main body and articulated arm.
2. Informazioni sulla sicurezza
- Ensure all installation steps are followed precisely to prevent injury or damage to the door closer or door.
- Do not attempt to modify the door closer. Unauthorized modifications can compromise safety and performance.
- Durante il funzionamento e la regolazione, tenere mani e dita lontane dalle parti mobili.
- This product is designed for doors up to 85 kg and 1100 mm wide. Using it on heavier or wider doors may result in malfunction or damage.
- Durante l'installazione utilizzare sempre utensili e dispositivi di protezione individuale adeguati.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- CISA 604 Series Door Closer Unit
- Articulated Arm Assembly
- Fixing Screws (various sizes for different mounting surfaces)
- Modello di montaggio
- Foglio di istruzioni (questo documento)
4. Configurazione (installazione)
The CISA 604 Series Door Closer can be surface-mounted on left or right-hand doors, for both pull-side and push-side applications. Refer to the included mounting template for precise hole drilling.
4.1. Passaggi di pre-installazione
- Determine the door's swing direction (left or right) and whether the closer will be mounted on the pull side (hinge side) or push side (opposite hinge side).
- Clean the mounting surface on the door and frame.
- Position the mounting template according to your chosen installation type and mark the drilling points accurately.
4.2. Mounting the Closer Body
- Praticare dei fori pilota nelle posizioni contrassegnate.
- Secure the main body of the door closer to the door frame or door using the provided fixing screws. Ensure it is level and firmly attached.
4.3. Installing the Arm Assembly
- Fissare il braccio principale al mandrino del chiudiporta.
- Attach the forearm to the door frame or door, ensuring the correct angle as indicated in the template for optimal operation.
- Collegare il braccio principale e l'avambraccio utilizzando la vite di collegamento.
Image 4.1: Detailed technical drawing of the CISA 604 Series Door Closer, illustrating dimensions and mounting hole positions for accurate installation.
5. Istruzioni per l'uso (Regolazioni)
The CISA 604 Series Door Closer features independent adjustments for closing speed and final strike, allowing precise control over door movement.
5.1. Regolazione della velocità di chiusura
The closing speed is regulated by a valve located on the side of the closer body. This valve controls the speed of the door from its fully open position until approximately 15 degrees from the closed position.
- A aumento closing speed, turn the adjustment screw clockwise (usually marked 'S' or '1').
- A diminuire closing speed, turn the adjustment screw counter-clockwise.
5.2. Adjusting Final Strike (Latching Speed)
The final strike, or latching speed, controls the door's speed for the last 15 degrees of closure, ensuring it latches securely without slamming. This is regulated by a separate valve.
- A aumento latching speed, turn the adjustment screw clockwise (usually marked 'L' or '2').
- A diminuire latching speed, turn the adjustment screw counter-clockwise.
Make small adjustments and test the door's closing action after each adjustment. Avoid over-tightening the screws.
Image 5.1: Diagram showing the two adjustment sectors: the green sector for overall closing speed (up to 80 degrees) and the red sector for final strike speed (the last 15 degrees).
6. Manutenzione
The CISA 604 Series Door Closer is designed for minimal maintenance. However, periodic checks can ensure its longevity and optimal performance.
- Ispezione annuale: Check all mounting screws for tightness. Re-tighten if necessary.
- Assemblaggio del braccio: Inspect the articulated arm for any signs of wear or damage. Ensure all pivot points move freely.
- Pulizia: Wipe the closer body with a soft, damp panno per rimuovere polvere e sporco. Evitare detergenti abrasivi.
- Prova di funzionalità: Periodically test the door's closing and latching speed to ensure it operates as desired. Readjust if needed.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La porta si chiude troppo velocemente/lentamente | Closing speed or latching speed adjustment incorrect. | Adjust the appropriate speed valve (refer to Section 5). |
| Door does not latch properly | Latching speed too slow or arm assembly misaligned. | Increase latching speed. Check arm alignment and ensure all screws are tight. |
| Il chiudiporta perde olio | Internal seal damage or extreme temperature fluctuations. | Contattare l'assistenza clienti per assistenza. Non tentare di riparare. |
| Il chiudiporta fa troppo rumore | Viti di montaggio allentate o componenti del braccio usurati. | Check and tighten all mounting screws. Inspect arm assembly for wear. |
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | 60460 |
| Regolazione della forza | EN 2-4 (Adjustable) |
| Peso massimo della porta | 85 kg |
| Larghezza massima della porta | 1100 millimetri |
| Tipo di installazione | Montaggio in superficie |
| Materiale | Metallo |
| Colore | Marrone scuro |
| Dimensioni del prodotto | 180 x 40 x 60 mm (L x P x A) |
| Peso dell'articolo | 1.54 kg (3.39 libbre) |
| Standard Met | Norma EN 2-4 |
9. Garanzia e supporto
CISA products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official CISA website. For technical support, replacement parts, or further assistance, please contact your local CISA distributor or customer service.
Per maggiori informazioni, visita il sito ufficiale CISA websito.
