Manuale utente dell'incisore laser SCULPFUN iCube Pro 5W

1. Introduzione

This user manual provides essential information for the safe and efficient operation of your SCULPFUN iCube Pro 5W Laser Engraver. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Image: The SCULPFUN iCube Pro 5W Laser Engraver, a compact blue and yellow unit, shown with an engraved wooden disc.

2. Informazioni sulla sicurezza

AVVERTIMENTO: This product is a Class 4 laser device. Direct exposure to the laser beam can cause severe eye injury and skin burns. Always wear the provided safety goggles during operation. Never look directly into the laser.

• Assicurarsi che l'area di lavoro sia ben ventilata.
• Non utilizzare la macchina in prossimità di materiali infiammabili.
• Tenere bambini e animali domestici lontani dall'area operativa.
• The built-in temperature alarm will sound and the machine will stop if the internal temperature exceeds 45°C. Do not override this safety feature.
• Scollegare sempre l'alimentazione prima di effettuare operazioni di manutenzione o pulizia.
• Utilizzare solo l'alimentatore fornito con il dispositivo.

Image: Diagram illustrating the temperature sensing safety alarm feature, showing the engraver with an alarm icon and a thermometer indicating 45°C.

3. Caratteristiche del prodotto

• Cutting and Engraving 2-in-1: Equipped with a 5W diode laser and 0.06mm ultra-fine laser focus, allowing for strong cutting penetration (up to 10mm soft board, 6mm acrylic) and ultra-fine engraving of delicate patterns.
• Built-in Smoke Filtering System: Features a high-efficiency smoke filter, eliminating the need for an external smoke exhaust box and effectively filtering smoke during engraving.
• Allarme temperatura: An integrated safety system that stops the machine and sounds an audible alarm if the internal temperature exceeds 45°C, ensuring user and machine safety.
• Incisione ad alta velocità: Utilizes a new 32-bit high-speed engraving motherboard, achieving speeds of up to 10,000mm/min, significantly improving engraving efficiency.
• Semi-open Structure Design: The removable laser protective shield allows for engraving objects both inside the machine and by placing the machine on the surface of larger objects. The working area is 130x130mm.
• Metodi di connessione multipli: Supports connection via mobile phone (Sculpfun APP), computer (BT function or Type-C interface), compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux systems.

Immagine: Primo piano view demonstrating the 0.06mm ultra-fine laser focus and the machine's ability to cut 10mm wood and engrave fine details.

Immagine: Esploso view showing the components of the built-in smoke filtering system, including the removable window structure, smoke dust filter, activated carbon smell filter, and strong suction fan.

Immagine: Due views of the engraver demonstrating its semi-open design, allowing it to engrave objects placed inside or on top of larger items.

Image: Depiction of the various connection methods supported, including mobile app and computer connections via Wi-Fi, Bluetooth, USB, and TF Card.

4. Contenuto della confezione

Si prega di verificare che tutti gli articoli elencati di seguito siano inclusi nel pacchetto:

• SCULPFUN iCube Pro 5W Laser Engraver Unit
• Testa laser
• Adattatore di alimentazione
• Cavo di alimentazione
• Cavo di tipo C
• Piastra metallica
• Filtro in cotone
• U-Shaped Shield
• Kit di riparazione delle lenti
• Occhiali di sicurezza
• MDF Sample Consiglio
• Basswood Sample Consiglio

Image: A visual representation of all components included in the SCULPFUN iCube Pro 5W package, laid out neatly.

5. Guida all'installazione

Follow these steps to set up your SCULPFUN iCube Pro 5W Laser Engraver:

1. Disimballaggio: Rimuovere con attenzione tutti i componenti dalla confezione.
2. Posizionamento: Posizionare l'incisore su una superficie stabile e piana, in un'area ben ventilata, lontano da materiali infiammabili.
3. Connetti alimentazione: Collegare l'adattatore di alimentazione all'incisore e quindi collegarlo a una presa di corrente adatta.
4. Connetti al computer/dispositivo mobile:
   • Connessione USB: Use the provided Type-C cable to connect the engraver to your computer.
   • Bluetooth/Wi-Fi: Refer to the Sculpfun APP instructions for wireless connection setup.
5. Installazione del software: Install the recommended engraving software (e.g., LightBurn, LaserGRBL) on your computer or the Sculpfun APP on your mobile device.
6. Installazione del driver (se necessario): Ensure all necessary drivers for the USB connection are installed. You may need to check Device Manager on Windows to confirm the COM port.
7. Configurazione software iniziale:

   For LightBurn, follow the on-screen wizard to set up your device. Select "GRBL" as the device type and "Serial/USB" for connection. Input the work area dimensions as 130mm x 130mm. Ensure "Auto home your laser on startup" is enabled for proper calibration.

   Video: This video demonstrates the initial connection and setup process for the SCULPFUN iCube using LightBurn software, including selecting the correct device type and setting up the work area dimensions.
8. Incisione di prova: Before starting any major project, perform a small test engraving on a sample material to verify settings and functionality.

6. Istruzioni per l'uso

This section outlines the general steps for operating your laser engraver. Specific software instructions will vary.

1. Preparare il materiale: Place the material to be engraved or cut on the metal plate inside the engraver. Ensure it is flat and securely positioned. For larger objects, the semi-open design allows the engraver to be placed directly on top of the material.
2. Progetto di progettazione/caricamento: Open your engraving software (e.g., LightBurn, Sculpfun APP) and either create a new design or load an existing project file.
3. Regola impostazioni: Configure the laser parameters (power, speed, passes) according to the material type and desired effect. Refer to material testing guides for optimal settings.
4. Preview e Cornice: Utilizzare il software preview function to visualize the engraving path. Utilize the "Frame" function on the engraver to ensure the laser path is within the boundaries of your material.
5. Indossare occhiali protettivi: Always wear the provided safety goggles before initiating any laser operation.
6. Inizia l'incisione/taglio: Initiate the process from your software. Monitor the engraving process closely.
7. Monitor Safety Features: Pay attention to the temperature alarm. If it activates, stop the machine immediately and allow it to cool down.
8. Completamento: Once the process is complete, wait for the laser to stop completely before opening the protective shield or removing the material.

7. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e prolunga la durata del vostro incisore.

• Pulizia della lente laser: Periodically clean the laser lens using a soft, lint-free cloth and lens cleaning solution. Refer to the lens repair kit instructions for proper procedure.
• Sostituzione dei filtri: The smoke filter will accumulate dust and debris over time. Replace the cotton filter and activated carbon smell filter as needed to maintain effective smoke filtration. One free filtering set is included, and additional sets can be purchased.
• Pulizia generale: Keep the interior and exterior of the engraver clean from dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
• Aggiornamenti del firmware: Check the SCULPFUN official websito o app per verificare la disponibilità di eventuali aggiornamenti del firmware, per garantire che il dispositivo disponga delle funzionalità e delle correzioni di bug più recenti.

8. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare.

9. Specifiche

10. Garanzia e supporto

For warranty information and technical support, please refer to the official SCULPFUN weboppure contatta direttamente il servizio clienti. Conserva la ricevuta d'acquisto come prova d'acquisto.

Produttore: SCULPFUN
Data prima disponibilità: 10 dicembre 2024

Per ulteriore assistenza, puoi visitare il SCULPFUN Store on Amazon.