Thermalright TL-C12C-X28-S X3 CPU Cooler Fan Instruction Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-C12C-X28-S X3 CPU Cooler Fan. Please read this manual thoroughly before installation to ensure correct setup and optimal performance. This fan is designed for efficient cooling in various PC configurations, including chassis, CPU coolers, and water cooling radiators, featuring ARGB lighting and PWM speed control.

2. Contenuto della confezione

Verifica che tutti i componenti siano presenti nel tuo pacchetto:

• Thermalright TL-C12C-X28-S X3 120mm ARGB Performance Fan(s)
• Viti di montaggio
• Cavo ventola PWM (4 pin)
• ARGB Cable (3-pin 5V)

3 Caratteristiche

• Raffreddamento ad alte prestazioni: Automatic speed control via 4-pin PWM interface, with a maximum speed of 1550 RPM.
• ARGB LED Lighting: High-brightness LED atomizing fan blades for soft ARGB lighting effects. Supports up to 17 lighting modes and motherboard synchronization (5V 3-pin ARGB).
• Funzionamento silenzioso: Noise level ≤ 25.4 dBA.
• Flusso d'aria ottimizzato: 73.3 CFM airflow and 1.86 mm H2O air pressure for enhanced cooling.
• Costruzione durevole: Made from industrial-grade PBT+PC material with dual-side soft-touch rubber pads for vibration absorption.
• Cuscinetto S-FDB: Equipped with a Stably-FDB (Fluid Dynamic Bearing) with magnetic design for low-friction, low-noise, and long-lasting operation.
• Applicazione versatile: Suitable for PC cases, CPU coolers, and water cooling radiators.

Immagine: Oltreview of the Thermalright TL-C12C-X28-S X3 fan highlighting its 28mm thickness, Addressable RGB support, Durable S-FDB Bearing, and PWM/ARGB Sharing Connector.

4. Configurazione e installazione

4.1 Fan Airflow Direction

For optimal cooling, ensure the fan is installed with the correct airflow direction. For normal airflow design fans, the blade side acts as intakes, and the frame side acts as exhausts. Install fans according to your case's airflow requirements.

Image: A single Thermalright TL-C12C-X28-S X3 fan illustrating its airflow design, with the blade side for intake and the frame side for exhaust.

4.2 Connecting PWM for Fan Speed Control

1. Locate the 4-pin PWM fan power connector on your fan cable.
2. Connect this 4-pin PWM connector to an available 4-pin fan header on your motherboard (e.g., CHA_FAN, CPU_FAN).
3. If connecting multiple fans, use the provided PWM sharing connector to daisy-chain additional fans for synchronized speed control. Connect the additional fan's PWM connector to the sharing header.

4.3 Connecting ARGB for Lighting Control

The fan supports 5V 3-pin Addressable RGB (ARGB) lighting. Do not connect to a 12V 4-pin RGB header, as this will damage the fan.

1. Locate the 3-pin 5V ARGB connector on your fan cable.
2. Connect this 3-pin ARGB connector to an available +5V ARGB header on your motherboard.
3. To synchronize the ARGB light effect across multiple fans, use the provided ARGB sharing connector to daisy-chain additional fans. Connect the additional fan's ARGB connector to the sharing header.
4. Note: Do not connect more than 6 ARGB fans of the same specification in series to avoid overloading the motherboard header.

4.4 Montaggio della ventola

1. Position the fan in the desired location within your PC case, on a CPU cooler, or on a water cooling radiator, ensuring the correct airflow direction.
2. Align the fan's screw holes with the mounting points.
3. Use the included screws to secure the fan. Tighten screws evenly to prevent warping.

5. Istruzioni per l'uso

Once installed and connected, the Thermalright TL-C12C-X28-S X3 fan operates automatically:

• Controllo della velocità della ventola (PWM): The fan speed is automatically regulated by your motherboard based on system temperature. You can typically adjust fan curves and profiles through your motherboard's BIOS/UEFI settings or dedicated software.
• Controllo dell'illuminazione ARGB: The ARGB lighting effects can be controlled and synchronized via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard manual for specific instructions on ARGB software usage.

6. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e longevità del ventilatore:

• Pulizia: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the system is powered off before cleaning.
• Ispezione: Controllare i cavi per eventuali segni di usura o danni. Assicurarsi che tutti i collegamenti siano ben saldi.
• Cuscinetto: The S-FDB bearing is designed for long-term, maintenance-free operation. Do not attempt to disassemble the fan.

7. Risoluzione Dei Problemi

If you encounter issues with your fan, refer to the following common solutions:

• La ventola non gira:
  • Assicurarsi che il connettore PWM a 4 pin sia saldamente inserito nel connettore della ventola della scheda madre.
  • Controlla le impostazioni BIOS/UEFI della scheda madre per assicurarti che il connettore della ventola sia abilitato e configurato correttamente.
  • Testare la ventola su un connettore diverso o con un controller per ventole, se disponibile.
• Luci ARGB non funzionanti/colori errati:
  • Verify the 3-pin 5V ARGB connector is securely plugged into a +5V ARGB header on your motherboard. Ensure it is not connected to a 12V 4-pin RGB header.
  • Check your motherboard's ARGB software for correct settings and synchronization.
  • Ensure no more than 6 fans are daisy-chained to a single ARGB header.
• Rumore eccessivo:
  • Assicurarsi che la ventola sia montata saldamente e che non vibri contro il case o altri componenti.
  • Controllare che non vi siano cavi o ostruzioni che interferiscano con le pale della ventola.
  • Se il rumore è un problema e le temperature lo consentono, regola le impostazioni della velocità della ventola nel BIOS/UEFI o nel software della scheda madre su un RPM inferiore.

8. Specifiche

Image: Diagram showing the dimensions of the Thermalright TL-C12C-X28-S X3 fan, indicating 120mm width and 28mm thickness.

9. Informazioni sulla garanzia

Thermalright products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the official Thermalright websito o contattare l'assistenza clienti.

10. Supporto

For technical assistance, troubleshooting, or general inquiries regarding your Thermalright TL-C12C-X28-S X3 CPU Cooler Fan, please visit the official Thermalright website or contact their customer support team. You may find FAQs, driver downloads, and additional resources online.