Manuale utente dell'allarme per porta del congelatore e del frigorifero Daytech DA10

1. Introduzione

The Daytech DA10 Freezer and Refrigerator Door Alarm is designed to alert users when a refrigerator or freezer door has been left open for an extended period. This device helps prevent food spoilage and unnecessary energy consumption by providing timely audible notifications. It features adjustable delay settings, multiple alarm modes, and customizable volume levels to suit various environments and needs.

2. Caratteristiche del prodotto

• Delayed Alert: Configurable delay times of 1, 2, 3, or 4 minutes before the alarm activates.
• Doppia modalità di suoneria: Choose between CHIME mode for a gentle reminder or ALARM mode for a loud alert.
• Volume regolabile: Five volume levels, ranging from 0 dB (silent) to 120 dB, allowing customization for different noise environments.
• Avviso di batteria scarica: The alarm provides a shorter beep duration when batteries are low, indicating it's time for replacement.
• Spegnimento automatico: If the door remains open, the alarm will stop after 30 minutes of continuous activation to conserve battery life.
• Applicazione versatile: Suitable for refrigerators, freezers, garage doors, shed doors, windows, cabinets, and other entry points.

Figura 1: Oltreview of Daytech Freezer Door Alarm features.

3. Contenuto della confezione

Si prega di controllare il pacco per assicurarsi che siano presenti tutti gli articoli:

• Main Alarm Unit (1x)
• Magnetic Strip (1x)
• Batterie AAA (2x)
• Double-sided Adhesive Tape (2x sets)
• Viti di montaggio (2x)
• Manuale dell'utente (1x)

4. Configurazione e installazione

4.1 Installazione della batteria

1. Open the battery compartment cover on the back of the main alarm unit.
2. Inserire due batterie AAA, assicurandosi della corretta polarità (+/-).
3. Chiudere saldamente il coperchio del vano batterie.

4.2 Montaggio dell'allarme

The alarm can be mounted using either the provided adhesive tape or screws.

1. Clean the surface where the alarm will be installed to ensure it is dry and free of dust or grease.
2. Attach the double-sided adhesive tape to the back of both the main alarm unit and the magnetic strip. Alternatively, use the provided screws for a more permanent installation.
3. Position the main alarm unit on the door frame or the fixed part of the appliance.
4. Position the magnetic strip on the moving part of the door, ensuring that the triangle marks on both the main unit and the magnetic strip are aligned.
5. La distanza tra l'unità principale e la banda magnetica deve essere inferiore o uguale a 0.98 pollici (2.5 cm) quando la porta è chiusa.

Figure 2: Step-by-step installation guide for the alarm.

Figure 3: Installation and battery replacement visuals.

5. Istruzioni per l'uso

5.1 Accensione/spegnimento e selezione della modalità

Use the 'CHIME/ALARM/OFF' switch on the side of the main unit to select the desired mode:

• CARRELLO: The alarm will emit a chime sound when triggered.
• ALLARME: The alarm will emit a loud siren sound when triggered.
• OFF: L'allarme è disattivato.

5.2 Setting Delay Time (1-4 Minutes)

Press the 'SET' key on the side of the main unit to cycle through the four delay modes. Each press will confirm the mode with a specific number of beeps:

• Mode 1 (1 beep): Alert after 1 minute, beeps every 15 seconds for 5 seconds until the door closes. (Recommended for refrigerators, basement doors).
• Mode 2 (2 beeps): Alert after 2 minutes, beeps every 10 seconds for 10 seconds until the door closes. (Recommended for garages, shed doors).
• Mode 3 (3 beeps): Alert after 3 minutes, beeps every 5 seconds for 15 seconds until the door closes. (Recommended for windows, cabinet doors).
• Mode 4 (4 beeps): Alert after 4 minutes, beeps every 20 seconds for 15 seconds until the door closes. (Recommended for offices, shop doors).

Figure 4: Four selectable delay modes and their alert patterns.

5.3 Regolazione del volume

Use the volume buttons (+/-) on the side of the main unit to adjust the alarm's loudness. There are 5 levels available, from 0 dB (silent) to 120 dB (maximum loudness).

6. Manutenzione

6.1 Pulizia

Wipe the alarm unit and magnetic strip with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

6.2 Sostituzione della batteria

When the low battery warning is activated (shorter beeps), replace the two AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 4.1.

7. Risoluzione Dei Problemi

8. Specifiche

• Modello: DA10
• Dimensioni: 2.52 x 1.34 x 4.57 pollici
• Peso dell'articolo: 3.98 once
• Fonte di energia: Batterie 2 x AAA (incluse)
• Tipo di batteria: Alcalino
• Metodo di controllo: Tocco
• Livello di rumore: 0-120 decibel
• Tipo di montaggio: Wall Mount (Adhesive/Screws)
• Portata massima del sensore: 0.98 pollici (2.5 cm)

9. Garanzia e supporto

Daytech products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or contact Daytech customer support. If you encounter any issues or have questions regarding your Daytech DA10 Freezer and Refrigerator Door Alarm, please visit the official Daytech websito o contattare il nostro servizio clienti per assistenza.

Informazioni sui contatti:
Please refer to the official Daytech websito o sulla confezione del prodotto per i dettagli di contatto più aggiornati.