Introduzione
The AUTOPHIX 7610P+ is a professional diagnostic scan tool specifically designed for Volkswagen, Audi, Skoda, and Seat vehicles. It provides comprehensive system diagnostics and various maintenance reset services, enabling users to identify and resolve vehicle issues efficiently. This manual will guide you through the proper setup, operation, and maintenance of your device.
Configurazione e utilizzo iniziale
Follow these steps to prepare your AUTOPHIX 7610P+ for its first use:
- Disimballaggio: Carefully remove the AUTOPHIX 7610P+ Code Reader and the USB Cable from the packaging.
- Collegamento del veicolo:
- Assicurati che il motore del tuo veicolo sia acceso.
- Individua la porta OBD2 del tuo veicolo. In genere si trova sotto il cruscotto, lato conducente.
- Plug the diagnostic tool's OBD2 connector firmly into the vehicle's OBD2 port. The device will power on automatically.
- Initial Device Boot-up: The device will display the main menu after powering on.
Istruzioni per l'uso
The AUTOPHIX 7610P+ offers various functions accessible through its main menu. Use the navigation buttons (Up, Down, Left, Right, OK, ESC, I/M, READ DTC) to select and confirm options.
1. Diagnosi completa del sistema
This function allows for a comprehensive scan of all electronic control units (ECUs) in your vehicle, including Engine, Transmission, ABS, Airbag, and more. It helps identify fault codes across various systems.
- From the main menu, select "For VW" (or similar option for VAG vehicles).
- Choose "Full System Scan" or "Diagnosis".
- The tool will automatically scan all available systems and display any detected fault codes.
- Review the displayed codes and their descriptions.
- To clear fault codes after repairs, select the "Erase Fault Codes" option. Note: Fault codes can only be cleared after the underlying issue has been repaired. This scanner does not repair vehicle issues.
2. Maintenance Reset Services
The 7610P+ supports various essential maintenance reset functions. Availability of specific functions may vary by vehicle model and year. Please confirm compatibility for your specific vehicle before performing any service.
- Ripristino dell'olio: Resets the oil life monitor after an oil change.
- Registrazione della batteria (reset BMS): Registers a new battery with the vehicle's ECU to ensure proper charging and system function.
- Ripristino del controllo elettronico dell'acceleratore (ETC): Recalibrates the throttle body.
- Ripristino del freno di stazionamento elettronico (EPB): Resets the EPB system after brake pad replacement or maintenance.
- Rigenerazione del filtro antiparticolato diesel (DPF): Initiates DPF regeneration to clear accumulated soot.
- Apprendimento dell'angolo di sterzata: Calibra il sensore dell'angolo di sterzata.
- Codifica iniettore: Writes specific parameters of new injectors into the ECU.
- Fuel Pump Activation: Activates the fuel pump for diagnostic checks.
- Ripristino TPMS: Re-initializes and calibrates the Tire Pressure Monitoring System.
To perform a reset service:
- From the main menu, select the desired reset function (e.g., "Oil Reset").
- Seguire le istruzioni visualizzate sullo schermo per completare la procedura.
3. Advanced OBD2 Modes
The tool provides standard OBD2 functions for engine diagnostics, compatible with most 1996 and newer 12V cars and light trucks (non-electric) that are OBD II-compliant with 16-Pin OBD II protocols.
- Leggi i codici: Retrieves generic (P0, P2, P3, U0) and manufacturer specific (P1, P3, U1) codes.
- Cancella codici: Cancella i codici di errore diagnostici (DTC) e spegne la spia di controllo motore (MIL).
- Prontezza I/M: Verifica la prontezza dei sistemi di monitoraggio delle emissioni.
- Flusso di dati: Displays live data from the vehicle's sensors in text or graph format.
- Informazioni sul veicolo: Recupera il numero di identificazione del veicolo (VIN), l'ID di calibrazione (CALID) e il numero di verifica della calibrazione (CVN).
- Test del sistema EVAP: Avvia un test di tenuta per il sistema di emissione evaporativa del veicolo.
Manutenzione e aggiornamenti
The AUTOPHIX 7610P+ offers lifetime free software updates to ensure compatibility with new vehicle models and to add new features or fix bugs.
- Download del software: Visita l'AUTOPHIX ufficiale website to download the latest update software for your device.
- Connessione al computer: Connect the diagnostic tool to a computer using the provided USB cable. This cable is solely for connecting the device to a computer for software updates or printing diagnostic reports.
- Processo di aggiornamento: Follow the instructions provided with the update software to install the latest firmware and vehicle databases onto your 7610P+. Ensure the computer meets the minimum system requirements (Windows 7/8/10/11) and that the driver is installed in administrator mode.
Risoluzione dei problemi
- Il dispositivo non si accende:
Ensure the OBD2 connector is securely plugged into the vehicle's OBD2 port and the vehicle's ignition is on (or engine running). The device draws power directly from the vehicle's OBD2 port.
- Errore di comunicazione:
Verify that the vehicle is compatible with the 7610P+ (VW, Audi, Skoda, Seat). Check the OBD2 connection. If the issue persists, try the tool on another compatible vehicle to rule out a vehicle-specific problem. For specific compatibility inquiries, contact AUTOPHIX customer support with your car's brand, model, year, and the specific issue you're experiencing.
- Impossibile cancellare i codici di errore:
Fault codes can only be cleared after the underlying mechanical or electrical issue has been resolved. If the problem persists, the code will reappear. This scanner does not repair vehicle issues.
- Problemi di aggiornamento software:
Ensure the USB cable is properly connected to both the device and the computer. Confirm that the update software is running in administrator mode on a compatible Windows operating system (7, 8, 10, or 11). Check for internet connectivity during the update process.
- Funzione specifica non funzionante:
Some advanced functions may not be supported on all vehicle models or years. Refer to the vehicle coverage list or contact AUTOPHIX customer support with your vehicle's brand, model, year, and the specific function you are trying to use for confirmation.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | AUTOFICE |
| Modello | 7610P+ |
| Compatibilità | VW, Audi, Skoda, Seat (VAG vehicles); OBD2 functions for most 1996 and newer 12V non-electric vehicles. For specific model compatibility, refer to the official AUTOPHIX websito o contattare l'assistenza. |
| Funzioni | Full System Diagnosis, Oil Reset, Battery Registration, BMS/ETC/EPB/DPF/SRS/TPMS Reset, Steering Angle Learning, Injector Coding, Fuel Pump Activation, Full OBD2 Modes. |
| Display | LCD a colori |
| Connettività | OBD2 cable, USB for updates |
| Fonte di alimentazione | Vehicle OBD2 port (no internal battery required) |
| Dimensioni | 7.9 x 1.77 x 10.4 pollici |
| Peso | 2.18 libbre |
| Aggiornamenti | Aggiornamenti gratuiti a vita |
Garanzia e supporto
AUTOPHIX is committed to providing high-quality products and customer satisfaction.
- Garanzia: Please refer to the product packaging or the official AUTOPHIX websito per informazioni dettagliate sulla garanzia.
- Assistenza clienti: For technical assistance, compatibility inquiries, or any other questions, please contact AUTOPHIX customer support. Contact details can typically be found on the official AUTOPHIX websito o all'interno della documentazione del prodotto.