Feit Electric 20ft Chasing & Tunable White LED Tape Light User Manual

Importanti istruzioni di sicurezza

ATTENZIONE: PERICOLO DI INGESTIONE. Questo prodotto contiene una pila a bottone o una batteria a bottone. MORTE or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Ustioni chimiche interne in appena 2 ore. Keep new and used batteries FUORI PORTATA DEI BAMBINI. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Always ensure the power adapter is disconnected from the power source before installation, maintenance, or troubleshooting.
Do not expose the tape light or power adapter to excessive heat or direct flame.
Do not submerge the tape light or power adapter in water. While designed for indoor/outdoor use, ensure connections are secure and protected from direct water exposure.
Only use the provided power adapter and remote control with this product.
Do not attempt to repair or modify the tape light or its components. Refer all servicing to qualified personnel.
Per una corretta adesione, assicurarsi che la superficie di installazione sia pulita, asciutta e liscia.
Do not bend the tape light sharply or at angles less than 90 degrees to prevent damage to the LED circuits.
Tenere i materiali di imballaggio lontano dalla portata dei bambini.

Contenuto della confezione

Verificare che tutti i componenti elencati di seguito siano inclusi nel pacchetto:

Image showing the contents of the Feit Electric LED Tape Light package, including the coiled tape light, power adapter, remote control, mounting clips, and screws.

Figura 1: Contenuto della confezione

1x Feit Electric 20ft Chasing & Tunable White LED Tape Light
1x telecomando
1x adattatore di alimentazione
10x clip di montaggio
20x Viti

Specifiche

Detailed technical specifications for the Feit Electric LED Tape Light:

Numero di modello	TAPE240/CHASE
Lunghezza	20 piedi (6.1 metri)
Linkable Length	Fino a 40 piedi (12.2 metri)
Potenza luminosa	1000 lumen (luminosità bianca)
Consumo energetico	24 Watt
Voltage	24 Volt CC
Colore chiaro	RGB (Red, Green, Blue) + Tunable White
Caratteristiche speciali	Remote Controlled, Dimmable, Chasing Effects, Cut-to-Size, Linkable
Uso interno/esterno	Yes (Weather Resistant)
Durata	25,000 ore
Dimensioni (larghezza)	0.4 pollici (10 mm)
Metodo di controllo	Telecomando a infrarossi

Diagram illustrating the 20ft total length of the LED tape light and key features like color changing, tunable white, 1000 lumens, plug-in, ON/OFF/DIM, linkable, indoor use, and remote control.

Figura 2: Caratteristiche e dimensioni del prodotto

Guida all'installazione

Follow these steps for proper installation of your LED Tape Light:

Pianifica il tuo layout: Before peeling the adhesive, unroll the tape light and lay it out in your desired location to confirm the length and placement. Ensure the power adapter can reach an outlet.
Preparare la superficie: Clean the installation surface thoroughly. It must be dry, smooth, and free of dust, dirt, or grease for optimal adhesive performance.
Cut to Size (Optional): If a shorter length is required, locate the designated cutting marks on the tape light (typically indicated by a scissor icon or copper pads). Cut only at these marked points to avoid damaging the circuit.
Applicare la luce del nastro: Carefully peel off the backing from the adhesive strip on the back of the tape light. Press the tape light firmly onto the prepared surface, working in small sections to ensure good contact and avoid air bubbles.
Fissare con clip (facoltativo): For added security, especially on textured surfaces or in high-traffic areas, use the included mounting clips and screws. Space them evenly along the tape light.
Connetti alimentazione: Plug the tape light connector into the power adapter. Then, plug the power adapter into a standard electrical outlet.
Link Multiple Strips (Optional): If linking multiple 20ft strips (up to a maximum of 40ft total), connect them end-to-end using the integrated connectors. Ensure the power supply is adequate for the total length.

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a soft blue light, demonstrating an indoor application.

Figura 3: Esample Indoor Installation (Kitchen)

An image showing the Feit Electric LED tape light installed along the ceiling of an outdoor patio, displaying multiple colors, demonstrating an outdoor application.

Figura 4: Esample Outdoor Installation (Patio)

Istruzioni per l'uso

Control your Feit Electric LED Tape Light using the included remote control:

Image of the Feit Electric LED tape light coiled with the remote control next to it, showing the various buttons for color, mode, and brightness.

Figure 5: Remote Control and Tape Light

Accensione/spegnimento: Premere il tasto Pulsante di accensione (red button, top right) to turn the lights on or off.
Regolazione della luminosità: Utilizzare il Aumento luminosità (▲) E Luminosità ridotta (▼) pulsanti per regolare l'intensità della luce.
Selezione del colore:
- Premere il tasto RGB color buttons (Red, Green, Blue, etc.) to select a static color.
- Premere il tasto "W" button for Tunable White light.
Modalità dinamiche:
- Chasing Effetti: Utilizzare il "Chase" button to activate dynamic chasing light patterns.
- Altre modalità: Explore buttons like "Flash", "Strobe", "Fade", E "Smooth" for various light transitions and effects.
- Regolazione della velocità: Utilizzare il Accelerare E Velocità di Down buttons to control the pace of dynamic modes.
Funzione timer: Some remotes may include a timer function. Refer to the remote's specific markings for details.

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a vibrant red light, demonstrating a color changing option.

Figure 6: Kitchen with Red Light

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a warm white light, demonstrating a tunable white option.

Figure 7: Kitchen with Warm White Light

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a cool white light, demonstrating another tunable white option.

Figure 8: Kitchen with Cool White Light

Manutenzione

To ensure the longevity and optimal performance of your LED Tape Light, follow these maintenance guidelines:

Pulizia: Disconnect the power adapter before cleaning. Use a soft, dry, or slightly damp cloth to wipe the tape light. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
Ispezione: Periodically inspect the tape light and power adapter for any signs of damage, such as frayed wires, cracks, or loose connections. If any damage is found, discontinue use and contact customer support.
Magazzinaggio: If storing the tape light for an extended period, ensure it is clean and dry. Coil it loosely to prevent kinks or damage to the LED strip. Store in a cool, dry place away from direct sunlight.
Sostituzione della batteria (telecomando): If the remote control's range or responsiveness decreases, the battery may need replacement. Refer to the remote's battery compartment for the correct battery type (typically a CR2025 or similar coin cell battery) and replacement instructions. Ensure proper polarity.

Risoluzione dei problemi

If you encounter issues with your Feit Electric LED Tape Light, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
Le luci non si accendono.	Nessuna alimentazione, connessione allentata, adattatore di alimentazione difettoso.	Assicurarsi che l'adattatore di corrente sia collegato saldamente a una presa funzionante. Check all connections between the tape light and the power adapter. Try plugging another device into the outlet to confirm it has power.
Il telecomando non funziona.	Remote battery is dead, remote is too far, obstruction, IR receiver blocked.	Replace the battery in the remote control (CR2025). Ensure there are no obstructions between the remote and the tape light's IR receiver. Point the remote directly at the IR receiver. Ensure you are within the remote's operating range.
Le luci sono fioche o tremolanti.	Insufficient power, damaged section of tape light, loose connection.	Ensure the power adapter is correctly rated for the total length of tape light connected. Controllare che tutti i collegamenti non siano allentati. If only a section is affected, that part of the tape light may be damaged.
L'adesivo non aderisce.	Improper surface preparation, surface type.	Ensure the surface was clean, dry, and smooth before application. For textured or porous surfaces, use the included mounting clips and screws for a more secure installation.

Informazioni sulla garanzia

This Feit Electric LED Tape Light is covered by a Garanzia del produttore di 1 anni from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or modifications. Please retain your proof of purchase for warranty claims.

Assistenza clienti

For further assistance, technical support, or warranty inquiries, please contact Feit Electric customer support.

Visit our online support portal for FAQs and contact options:
https://help.feit.com/hc/en-us

	Feit Electric Smart Bulb User Guide: Setup for Alexa and Google Home Comprehensive user guide for Feit Electric smart bulbs, detailing setup instructions for Amazon Alexa and Google Assistant, app features, device management, and troubleshooting.
	Feit Electric 4X1 Linkable LED Strip Light Installation Guide and Safety Instructions Comprehensive guide for installing and using the Feit Electric 4X1 Linkable LED Strip Light, including safety precautions, installation methods (hardwired, power cord, J-box, flush mount), linking instructions, color temperature selection, and maintenance.
	Lampada da soffitto a LED dimmerabile da 7.5 pollici FEIT Electric con pannello piatto e colore selezionabile - Guida all'uso e alla cura 74206/6WYCA Scopri la plafoniera a pannello piatto rotondo bianco dimmerabile da 7.5 pollici di FEIT Electric (modello 74206/6WYCA). Questa guida fornisce istruzioni essenziali per l'uso e la manutenzione, passaggi di installazione per il montaggio in scatola di derivazione e a incasso e dettagli sulla selezione della temperatura di colore.
	Feit Electric Smart Chasing LED Strip Light Installation Guide A quick installation guide for the Feit Electric Smart Chasing LED Strip Light, covering safety instructions, setup, app connection, and troubleshooting.
	Guida utente dell'app Feit Electric per la presa intelligente da interno Comprehensive user guide for the Feit Electric App, detailing setup instructions for indoor smart plugs, including integration with Siri Shortcuts, Alexa, and Google Assistant. Learn about device management, scheduling, timers, and more.
	Feit Electric Indoor Smart Plug User Guide: Setup, Features, and Integration Comprehensive user guide for the Feit Electric Indoor Smart Plug, covering app setup, Wi-Fi connection, voice assistant integration (Alexa, Google Assistant, Siri Shortcuts), schedules, timers, groups, and smart scenes.

Feit Electric TAPE240/CHASE