GAMDIAS Boreas E1-210 LITE CPU Air Cooler User Manual

1. Introduzione

The GAMDIAS Boreas E1-210 LITE is an air cooling solution designed for central processing units (CPUs). It features a 92mm fan with LED illumination, two copper heat pipes, and a hydraulic bearing fan for efficient heat dissipation. This cooler is compatible with a wide range of Intel and AMD motherboard sockets, providing effective thermal management for your system.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione prima di procedere con l'installazione:

• Boreas E1-210 LITE CPU Cooler Unit (Heatsink and Fan)
• Staffa di montaggio universale
• Intel Mounting Clips/Screws
• AMD Mounting Clips/Screws
• Thermal Paste (may be pre-applied or in a small tube)
• Manuale dell'utente (questo documento)

Figura 2.1: Fronte view of the GAMDIAS Boreas E1-210 LITE CPU Air Cooler.

Figure 2.2: Included mounting kit components for various CPU sockets.

3. Specifiche

4. Configurazione e installazione

Follow these general steps for installing the GAMDIAS Boreas E1-210 LITE CPU cooler. Specific steps may vary slightly depending on your motherboard and CPU socket type. Always refer to your motherboard's manual for precise instructions on CPU cooler installation.

4.1. Preparazione

1. Assicurati che il computer sia spento e scollegato dalla presa a muro.
2. Aprire il case del computer per accedere alla scheda madre.
3. If replacing an existing cooler, carefully remove it and clean any old thermal paste from the CPU surface using isopropyl alcohol and a lint-free cloth.

4.2. Installazione della staffa di montaggio

Identifica l'hardware di montaggio corretto per il socket della tua CPU (Intel o AMD).

1. Per socket Intel: Attach the appropriate Intel mounting clips to the universal mounting bracket. Position the bracket over the CPU socket, aligning the holes with the motherboard's cooler mounting holes. Secure it from the back of the motherboard if a backplate is provided or required.
2. Per socket AMD: Attach the appropriate AMD mounting clips to the universal mounting bracket. Position the bracket over the CPU socket, aligning the holes with the motherboard's cooler mounting holes. Secure it.

Figure 4.1: Universal mounting kit for Intel and AMD platforms.

4.3. Thermal Paste Application

Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient. The cooler's direct contact heat pipes will spread it evenly upon installation.

4.4. Installazione del dispositivo di raffreddamento

1. Carefully place the heatsink assembly onto the CPU, ensuring the base makes full contact with the thermal paste.
2. Align the cooler's mounting clips with the universal mounting bracket.
3. Fissare il dispositivo di raffreddamento serrando le viti in diagonale (ad esempio, in alto a sinistra, in basso a destra, in alto a destra, in basso a sinistra) fino a quando non sono ben strette. Non serrare eccessivamente.

Figure 4.2: Heatsink design with 2 copper heat pipes for efficient thermal conductivity.

4.5. Collegamento della ventola

1. Locate the 3-pin fan connector on the cooler's fan cable.
2. Connect this cable to an available 3-pin or 4-pin CPU Fan header on your motherboard. Refer to your motherboard manual for the exact location of the CPU Fan header.
3. The fan features Rainbow LED illumination, which will light up once connected and powered on.

Figure 4.3: The 92mm hydraulic bearing fan provides high airflow.

Figure 4.4: The Boreas E1-210 LITE CPU cooler installed in a system.

5. Istruzioni per l'uso

Once installed and connected, the GAMDIAS Boreas E1-210 LITE CPU cooler operates automatically based on your motherboard's fan control settings. The fan will spin to cool the CPU, and the Rainbow LED illumination will activate.

• Velocità della ventola: The fan operates at up to 2200 RPM. If connected to a 4-pin PWM header, your motherboard's BIOS/UEFI or operating system software may allow for fan speed control based on CPU temperature. If connected to a 3-pin header, the fan will typically run at a constant speed or be voltage-controlled by the motherboard.
• Illuminazione a LED: The fan features fixed Rainbow LED lighting that illuminates when the fan receives power. There are no software controls for the LED effects on this specific model.

6. Manutenzione

Una manutenzione regolare contribuisce a garantire prestazioni di raffreddamento ottimali e prolunga la durata del dissipatore della CPU.

• Rimozione della polvere: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to clean dust from the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearing.
• Pasta termica: Thermal paste typically lasts for several years. If you notice consistently high CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste.
• Ispezione della ventola: Check the fan for any signs of wear, unusual noises, or obstructions. Ensure the fan cable is securely connected.

7. Risoluzione Dei Problemi

If you encounter issues with your GAMDIAS Boreas E1-210 LITE CPU cooler, refer to the following common troubleshooting steps:

• La ventola non gira:
  • Check if the fan cable is securely connected to the CPU Fan header on the motherboard.
  • Verify that the CPU Fan header is enabled in your motherboard's BIOS/UEFI settings.
  • Test the fan by connecting it to a different fan header if available.
• Temperature elevate della CPU:
  • Ensure the cooler is properly seated and making full contact with the CPU.
  • Check if sufficient thermal paste was applied and that it is evenly spread. Reapply if necessary.
  • Clean any dust buildup from the heatsink fins and fan.
  • Verify that the fan is spinning at an appropriate speed. Adjust fan curves in BIOS/UEFI if possible.
  • Assicurare un adeguato flusso d'aria all'interno del case del PC.
• I LED non si accendono:
  • Confirm the fan is receiving power and spinning. The LEDs are integrated with the fan's power.
  • If the fan is spinning but LEDs are off, there might be an issue with the fan's LED component.

8. Garanzia e supporto

For warranty information and technical support, please contact GAMDIAS customer service or the retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.

• Produttore: GAMDIAS TAIWAN, n. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
• Importatore (India): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact - 8904307700