Manuale utente del Monster Truck RC 4WD ad alta velocità in scala 1:16 DEERC 9308E

1. Introduzione

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your DEERC 9308E 1:16 Scale High-Speed 4WD RC Monster Truck. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Informazioni sulla sicurezza

Avvertimento:

This product contains small parts and is not suitable for children under 8 years old as it may pose a choking hazard. Always operate the product under adult supervision, especially in areas with traffic or hazards. Keep fingers, hair, and loose clothing away from moving parts. Do not operate near water or in wet conditions to prevent electrical damage. Always turn off the vehicle and remote control when not in use.

3. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1 x DEERC Heavy-Duty RC Truck
• 1 x 2.4Ghz Remote Control
• 2 x 7.4V 1500 mAh Rechargeable Batteries
• 1 x Cavo di ricarica
• 1 x Manuale del prodotto (questo documento)
• 1 x Cacciavite
• 1 x kit di pezzi di ricambio
• 2 x Dinosaur Car Shells (one pre-installed, one spare)

This image displays the complete set of items included with your DEERC 9308E RC Monster Truck, ensuring you have all necessary components for operation and maintenance.

4. Impostazione

4.1. Carica della batteria

The DEERC 9308E comes with two 7.4V 1500mAh rechargeable Lithium Ion batteries. Ensure batteries are fully charged before first use for optimal performance.

1. Collegare il cavo di ricarica alla batteria.
2. Collegare l'estremità USB del cavo di ricarica a un adattatore di alimentazione USB adatto (non incluso).
3. The indicator light on the charging cable will show the charging status. Refer to the charging cable's specific instructions for light indications.
4. Una volta caricata completamente, scollegare la batteria dal cavo di ricarica.

This image illustrates the included batteries and charging cable, highlighting the power source for extended playtime.

4.2. Installazione delle batterie nel telecomando

Il telecomando richiede 2 batterie AA (non incluse).

1. Aprire il vano batterie sul retro del telecomando.
2. Inserire 2 batterie AA, assicurandosi della corretta polarità (+/-).
3. Chiudere bene il vano batterie.

4.3. Attaching/Changing Car Shell

Your DEERC 9308E comes with two interchangeable dinosaur-themed car shells, allowing for customization.

1. To remove the current shell, gently pull out the four body clips located on the top of the chassis.
2. Lift the shell off the chassis.
3. Align the desired shell with the chassis posts.
4. Secure the shell by re-inserting the four body clips into the posts.

This image showcases the two distinct car shells, demonstrating the product's customizable appearance.

5. Istruzioni per l'uso

5.1. Controllo remoto finitoview

The 2.4Ghz remote control offers stable and precise control over your RC truck.

• Volante: Rotate left or right to control the direction of the truck.
• Grilletto dell'acceleratore: Tirare per andare avanti, spingere per frenare/fare retromarcia.
• Quadrante di regolazione della velocità: Adjusts the maximum speed of the truck (Min to Max).
• Quadrante del rivestimento dello sterzo: Fine-tunes the steering to ensure the truck drives straight when the steering wheel is centered.
• Interruttore di alimentazione: Accende/spegne il telecomando.
• Spia luminosa: Mostra lo stato di alimentazione e connessione.

This image details the remote control, illustrating its various buttons and dials for comprehensive operation.

5.2. Driving the RC Car

1. Ensure both the truck and remote control batteries are charged and installed.
2. Turn on the remote control first, then the RC truck. The indicator lights on both devices should confirm a successful connection.
3. Use the throttle trigger to accelerate forward or reverse.
4. Utilizzare il volante per girare il camion a sinistra o a destra.
5. Adjust the speed dial as needed for different terrains or skill levels.
6. The 4WD system and high-traction tires allow for excellent performance on various surfaces, including grass, dirt, and pavement.

This image captures the RC truck in motion on a dirt track, showcasing its dynamic performance and suitability for various environments.

6. Manutenzione

6.1. Pulizia

After each use, especially in dusty or dirty conditions, clean the truck to prevent debris from affecting performance. Use a soft brush or cloth to remove dirt from the chassis, wheels, and suspension components. Avoid using water directly on electronic components.

6.2. Cura della batteria

Per prolungare la durata della batteria:

• Non sovraccaricare o scaricare eccessivamente le batterie.
• Conservare le batterie in un luogo fresco e asciutto, lontano dalla luce solare diretta.
• In caso di stoccaggio prolungato, caricare le batterie fino a circa il 50% della loro capacità.

6.3. Part Replacement

The DEERC 9308E is built with a full-metal drivetrain, including metal adjustable shocks, differentials, and drive shafts for enhanced durability. In case of damage, a spare parts kit is included for common replacements. Refer to the 'Device Explosion Diagram' in the printed manual for detailed part identification and assembly instructions.

This image provides a detailed look at the metal components of the RC truck's drivetrain, illustrating the quality and durability of its internal parts.

7. Risoluzione Dei Problemi

If you encounter issues with your DEERC 9308E, refer to the following common problems and solutions:

8. Specifiche

9. Garanzia e supporto

DEERC is committed to customer satisfaction. If you are not completely satisfied with any of our products, please do not hesitate to contact us. We take full responsibility for product quality and will do our utmost to resolve your issue quickly and effectively. For support, please refer to the contact information provided with your product packaging or visit the official DEERC websito.