OLIGHT Javelot Turbo 2 and I3T 2 Flashlight User Manual

1. Configurazione e utilizzo iniziale

1.1 Installazione e ricarica della batteria

1. Unscrew Tail Cap: Rotate the tail cap counter-clockwise to open the battery compartment.
2. Inserire la batteria: Insert the provided rechargeable battery pack with the positive (+) end facing towards the head of the flashlight.
3. Tappo di sicurezza: Riavvitare il tappo posteriore in senso orario fino a quando non è completamente serrato.
4. Carica iniziale: Before first use, fully charge the flashlight. The Javelot Turbo 2 supports dual charging options:
   • Ricarica magnetica: Attach the magnetic charging cable to the tail cap. The indicator light on the charger will show charging status.
   • Ricarica USB-C: Locate the hidden USB-C port by rotating the protective cover near the head of the flashlight. Insert a USB-C cable.

Image: The OLIGHT Javelot Turbo 2 demonstrating its hidden USB-C charging port and the magnetic charging method on the tail cap.

2. Istruzioni per l'uso

2.1 Funzionamento di base

• Accensione/spegnimento: Premere una volta l'interruttore laterale per accendere o spegnere la torcia.
• Modifica i livelli di luminosità: When the flashlight is on, press and hold the side switch to cycle through brightness levels (Low, Medium, High). Release the switch to select the desired level.
• Modalità Turbo: Double-press the side switch quickly to activate Turbo mode (1800 lumens, 1500-meter throw). Double-press again to return to the previous mode.
• Modalità strobo: Premere rapidamente tre volte l'interruttore laterale per attivare la modalità Strobo. Premere una volta per uscire.
• Blocco/Sblocco: When the flashlight is off, press and hold the side switch for approximately two seconds until the light briefly flashes, indicating lockout mode. To unlock, press and hold the side switch for approximately two seconds until the light turns on at the lowest setting.

Image: A visual representation of the OLIGHT Javelot Turbo 2's powerful 1500-meter beam compared to a previous model, highlighting its long-range illumination capability.

2.2 telecomando senza fili

The Javelot Turbo 2 includes a wireless remote for convenient operation from a distance of up to 8 meters.

• Abbinamento: The remote is pre-paired with the flashlight. If re-pairing is needed, refer to the specific instructions provided with the remote.
• Funzionamento a distanza:
  • Momentary On (Maximum Brightness): Press and hold the remote button.
  • Constant On (Maximum Brightness): Press the remote button once.
• Remote Charging: The remote charges via a magnetic dock located on the side of the flashlight. Ensure the remote is securely attached to the dock for charging.

Image: A hand holding the OLIGHT Javelot Turbo 2 wireless remote, demonstrating its use to control the flashlight from a distance.

Image: A close-up of the OLIGHT Javelot Turbo 2's magnetic dock, showing the remote being charged and held securely in place.

1. Configurazione e utilizzo iniziale

1.1 Installazione della batteria

1. Unscrew Head: Rotate the head of the flashlight counter-clockwise to open the battery compartment.
2. Inserire la batteria: Insert one AAA battery (alkaline or rechargeable) with the positive (+) end facing towards the head of the flashlight.
3. Testa sicura: Screw the head back on clockwise until it is fully tightened.

The I3T 2 is compatible with both standard AAA alkaline batteries and rechargeable AAA batteries. Using a rechargeable battery can boost the maximum output to 300 lumens.

Image: A person holding the OLIGHT I3T 2 flashlight, illustrating its use in a low-light environment and mentioning the option to use a rechargeable battery for increased output.

2. Istruzioni per l'uso

2.1 Funzionamento di base

• Accensione/spegnimento: Premere una volta l'interruttore posteriore per accendere o spegnere la torcia.
• Modifica i livelli di luminosità: When the flashlight is on, quickly turn it off and on again to cycle between Low and High modes. The flashlight can be initially powered on in your preferred low or high mode depending on your needs.
• momentaneo acceso: Half-press and hold the tail switch for momentary illumination. Release to turn off.

Image: The OLIGHT I3T 2 flashlight demonstrating its compact size and illustrating both high and low brightness modes in different scenarios.

Image: A graphic comparing the runtime of the OLIGHT I3T 2 (21 hours) with the previous I3T model (16 hours) using a 1.5V AAA alkaline battery, highlighting the extended battery life.

Image: A comparison showing the improved pocket clip design of the OLIGHT I3T 2, allowing for a more concealed and compact carry in a pocket compared to the I3T.