Introduzione
This manual provides comprehensive instructions for the setup, operation, and maintenance of your MUNBYN P01 Thermal Printer. The P01 is designed to integrate seamlessly with MUNBYN money counters, offering efficient printing of transaction details and serial numbers.
Caratteristiche principali:
- Designed for use with MUNBYN IMC01, IMC08, IMC21, and IMC09 mixed denomination money counters.
- Capable of printing serial numbers (SN) of counted bills.
- Compact design integrating a receipt printer and external TFT display.
- 58 mm paper width, 90 mm/sec print speed, with paper out detection.
- Features an imported print head for clear and lasting prints, with over-temperature protection.
- Plug-and-play connectivity via RJ-11 plug, no driver software required.
Prodotto finitoview
The MUNBYN P01 Thermal Printer is a compact device that combines a thermal printer with an external display, providing real-time information and printed records of money counting operations.
Figure 1: MUNBYN P01 Thermal Printer (left) shown alongside a compatible money counter (right).
Componenti:
- Thermal Printer Unit: Main body with integrated print head.
- Visualizzazione TFT: Shows counting results, denominations, and serial numbers.
- Paper Roll Compartment: Holds the thermal paper roll.
- Porta RJ-11: For connection to compatible MUNBYN money counters.
- Potenza in ingresso: Per collegare l'adattatore di alimentazione.
Figure 2: The MUNBYN P01 Thermal Printer is suitable for various professional environments, including offices, cashier desks, churches, and banks.
Impostare
1. Disimballaggio e ispezione:
- Estrarre con attenzione la stampante dall'imballaggio.
- Inspect the printer for any signs of damage during transit. If damaged, contact customer support.
- Ensure all components are present: P01 printer, power adapter, and any included cables.
2. Loading Thermal Paper:
- Open the paper roll compartment cover.
- Insert a 58 mm thermal paper roll into the compartment, ensuring the paper feeds from the bottom and the thermal side (usually smoother) faces the print head.
- Tirare un piccolo pezzo di carta oltre il bordo tagliente.
- Close the compartment cover firmly until it clicks into place.
Figure 3: Proper orientation for loading the thermal paper roll.
3. Connecting to a Money Counter:
- Locate the RJ-11 port on the back of the MUNBYN P01 printer.
- Connect one end of the RJ-11 cable (typically supplied with your money counter or printer) to the printer's RJ-11 port.
- Connect the other end of the RJ-11 cable to the designated printer port on your compatible MUNBYN money counter (e.g., IMC01, IMC08, IMC21, IMC09).
- Connect the power adapter to the printer's power input and then to a suitable power outlet.
- Power on both the money counter and the P01 printer. The printer's display should illuminate.
Istruzioni per l'uso
Funzionamento di base:
Once connected and powered on, the P01 printer will automatically receive data from the money counter. The display will show real-time counting information.
Figure 4: The P01 printer integrates with the money counter for quick printing.
Printing Count Results:
To print the results of a counting session, use the print function on your connected MUNBYN money counter. Refer to your money counter's specific user manual for detailed instructions on initiating a print job. The P01 printer will automatically print the summary, denomination breakdown, and serial numbers (if enabled and detected).
Figure 5: The printer can output detailed reports including serial numbers.
Figure 6: The P01 printer ensures high clarity in printed reports.
Manutenzione
1. Replacing Thermal Paper:
When the paper roll is depleted or a "paper out" error is indicated, replace the roll following the steps outlined in the "Loading Thermal Paper" section under Setup.
2. Cleaning the Printer:
- Ensure the printer is powered off and disconnected from the power source before cleaning.
- Per pulire la parte esterna della stampante, utilizzare un panno morbido, asciutto e privo di lanugine.
- For the print head, use a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Gently wipe the print head surface. Allow it to dry completely before use.
- Non utilizzare detergenti abrasivi o solventi.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Printer not powering on. | Nessuna alimentazione, adattatore difettoso, collegamento allentato. | Check power cable connection to printer and outlet. Ensure outlet is functional. Try a different power adapter if available. |
| Nessuna stampa. | Paper out, paper loaded incorrectly, loose RJ-11 cable, money counter not sending print command. | Check paper roll and ensure it's loaded correctly. Verify RJ-11 cable is securely connected to both printer and money counter. Confirm print command is sent from money counter. |
| Faint or blank prints. | Paper loaded upside down, print head dirty, low quality thermal paper. | Ensure thermal paper is loaded with the thermal side facing the print head. Clean the print head. Use high-quality thermal paper. |
| Printer not recognized by money counter. | Loose RJ-11 cable, incompatible money counter model. | Check RJ-11 cable connection. Ensure your money counter model (IMC01, IMC08, IMC21, IMC09) is compatible with the P01 printer. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | MUNBYN |
| Modello | P01 |
| Tipo di stampante | Thermal Printer with External Display |
| Larghezza della carta | 58 millimetri |
| Velocità di stampa | 90 mm/sec |
| Connettività | Spina RJ-11 |
| Baud Rate (Default) | 9600 |
| Compatibilità | MUNBYN IMC01, IMC08, IMC21, IMC09 Money Counters |
Garanzia e supporto
For warranty information and technical support, please contact MUNBYN customer service. Refer to the contact details provided with your product packaging or visit the official MUNBYN websito.
Supporto online: www.munbyn.com/support (Exampil collegamento (il collegamento effettivo può variare)
