Manuale utente del telecomando wireless e della scatola di controllo per letto regolabile Okin a 6 pulsanti

Introduzione

This manual provides instructions for the Okin 6 Button Adjustable Bed Wireless Remote (RF.23.06.02) and Control Box (CB.10.20.01) replacement parts. It covers setup, operation, maintenance, and troubleshooting to ensure proper functionality and compatibility with your adjustable bed system.

Componenti inclusi

• Okin 6 Button Wireless Remote (RF.23.06.02)
• Okin Control Box (CB.10.20.01)

Image: The Okin 6-button wireless remote control and the associated control box with its power cable. The remote features buttons for head up, head down, foot up, foot down, and a flat position. The control box has the Okin logo visible.

Configurazione e abbinamento

Follow these steps to pair your Okin wireless remote with the control box:

1. Fase 1: Double-click the pairing button on the control box. The control box indicator green light will turn on, indicating it has entered pairing mode.
2. Fase 2: On the remote, press and hold both the TESTA SU E TESTA GI buttons simultaneously. Continue holding until the control box indicator light goes out. This signifies that the pairing process is complete.

Nota importante sulla compatibilità: Ensure your bed does not have a massage function if using this remote, as it is not designed for massage functions. Also, verify that the control box's 5-pin lift motor connector matches your motor's connector type.

Istruzioni per l'uso

The Okin 6-button wireless remote provides intuitive control over your adjustable bed's positions.

• Testa su/giù: Use the arrow buttons with the head icon to raise or lower the head section of the bed.
• Piede su/giù: Use the arrow buttons with the foot icon to raise or lower the foot section of the bed.
• Piatto: Press the "FLAT" button to return the bed to a completely flat position.

Dual-Bed Synchronization: For controlling two adjustable beds simultaneously, use the master pairing function to connect to the first control box. Subsequently, use the slave function for the second control box. After both pairings are established, you can control both beds with a single remote.

Version and Button Matching: It is crucial to verify that the remote buttons match the product specifications. Mismatched buttons can lead to incompatibility, as different remote versions may have varying functions.

Manutenzione

Sostituzione della batteria

The adjustable bed wireless remote requires 2 batterie AAA for operation. Batteries are sold separately and are not included with the remote. Replace batteries when the remote's performance diminishes or it stops responding.

1. Individua il vano batteria sul retro del telecomando.
2. Far scorrere per aprire il coperchio della batteria.
3. Rimuovere le vecchie batterie.
4. Inserire due batterie AAA nuove, assicurandosi della corretta polarità (+/-).
5. Chiudere bene il coperchio della batteria.

Risoluzione dei problemi

If you encounter issues with your Okin wireless remote and control box, consider the following:

• Il telecomando non risponde:
  • Controllare che le batterie siano inserite correttamente e siano sufficientemente cariche. Sostituirle se necessario.
  • Ensure the remote is properly paired with the control box. Refer to the "Setup and Pairing" section for re-pairing instructions.
• Problemi di incompatibilità:
  • Verify that the remote buttons and functions match your bed's original remote or specifications. Mismatched versions can cause functionality problems.
  • Confirm that the control box's 5-pin lift motor connector is compatible with your bed's motor.
  • If your bed has a massage function, this remote and control box may not be compatible as they do not support massage features.
• Pacchetto Advantage: Acquistaasing the remote and receiver/control box together is recommended to avoid chip incompatibility issues that can arise from separately produced units.
• Pre-Purchase Checks: Prima dell'acquistoasing, always confirm part numbers, motor connectors, and whether your bed includes a massage function to ensure compatibility.

Specifiche

Garanzia e supporto

For warranty information or technical support, please refer to the original product packaging or contact the manufacturer directly. Keep your purchase receipt for warranty claims.

You can visit the official Okin store on Amazon for more products and support: Negozio Okin