Manuale di istruzioni del supporto magnetico per telefono a vuoto PlusAcc (modello: in carica)

1. Introduzione

This manual provides comprehensive instructions for the safe and effective use of your PlusAcc Vacuum Magnetic Phone Holder. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the product.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1 x Vacuum magnetic phone holder
• 1 x 1M USB A to Type-C Cable
• 1 x Metal ring (for non-MagSafe phones)
• 1 x Adhesive pad for car dashboard
• 1 x Cleaning kit

Image: Package contents of the PlusAcc Vacuum Magnetic Phone Holder.

3. Important Reminders & Safety

• Requisito di superficie: The holder works best on smooth surfaces such as windshields, center screens, and glossy dashboards. For smooth but textured surfaces, use the included adhesive pad for enhanced suction.
• Avoid Curved Surfaces: This product is not suitable for curved, uneven, or irregular leather surfaces.
• Phone Case Thickness: For optimal wireless charging and magnetic hold, ensure your phone case thickness is less than 4mm. Metal cases and wallet cases are not compatible.
• Interferenza magnetica: The holder is designed to avoid interference with cell phone signals.

Image: Surface compatibility for the phone holder.

4. Istruzioni per l'installazione

4.1 Preparazione della superficie

1. Clean the desired mounting surface thoroughly using the provided cleaning kit (wet wipe followed by dry wipe). Ensure the surface is free of dust, grease, and moisture.
2. For textured dashboards, peel off the protective film from the adhesive pad and firmly press it onto the cleaned surface. Allow it to set for at least 6 hours before attaching the phone holder.

4.2 Fissaggio del supporto per telefono

1. Place the suction cup of the phone holder onto the prepared smooth surface (or the adhesive pad).
2. While pressing down firmly on the holder, rotate the locking ring clockwise until it is tight. This activates the vacuum adsorption for a secure hold.

4.3 Collegamento del cavo di ricarica

Plug the provided USB A to Type-C cable into the Type-C port on the side of the magnetic charging pad and connect the other end to a suitable USB power source in your vehicle.

4.4 Using the Metal Ring (for non-MagSafe phones)

If your phone or phone case is not MagSafe-compatible, use the included metal ring:

1. Clean the back of your phone case.
2. Peel off the protective film from the metal ring.
3. Carefully align the metal ring to the center of your phone case (ensure it does not obstruct the camera or other features) and press firmly.
4. Allow the adhesive on the metal ring to cure for at least 6 hours before attaching it to the phone holder.

5. Istruzioni per l'uso

5.1 Collegamento del telefono

Simply place your MagSafe-compatible phone (or phone with the installed metal ring) onto the magnetic charging pad. The strong N55 magnets will securely hold your device in place.

Image: Phone securely attached and charging on the holder.

5.2 Regolazione del Viewangolo di ing

The holder features a 360° rotating base and a dual-axis folding arm, allowing you to adjust your phone to any desired viewing angle for safe navigation or media consumption.

Image: Adjustable viewing angles of the phone holder.

5.3 Ricarica wireless

Once your phone is attached and the cable is connected to a power source, wireless charging will begin automatically. The holder supports 15W fast charging.

6. Manutenzione

To ensure the longevity and optimal performance of your PlusAcc Vacuum Magnetic Phone Holder, follow these maintenance guidelines:

• Pulisci la ventosa: Periodically clean the suction cup with a damp cloth to remove any dust or debris that may reduce its adhesive strength.
• Superficie di montaggio pulita: Regularly clean the surface where the holder is mounted to maintain a strong vacuum seal.
• Evitare temperature estreme: While the alloy material is designed for various weather conditions, prolonged exposure to extreme heat or cold may affect the suction cup's performance.

7. Risoluzione Dei Problemi

If you encounter any issues with your PlusAcc Vacuum Magnetic Phone Holder, refer to the following common solutions:

8. Specifiche

9. Garanzia e supporto

For warranty information, technical support, or any inquiries regarding your PlusAcc Vacuum Magnetic Phone Holder, please contact PlusAcc customer service through the retailer where the product was purchased or visit the official PlusAcc websito.