1. Introduzione
This manual provides detailed instructions for the FOXWELL BT630 Bluetooth Battery Monitor with Shunt and the FOXWELL BT705 Plus Car Battery Tester. The BT630 offers real-time battery monitoring via Bluetooth, while the BT705 Plus is a comprehensive 12V and 24V car battery analyzer. Please read this manual thoroughly before operating the devices to ensure proper usage and safety.
2. Prodotto finitoview
2.1 FOXWELL BT705 Plus Car Battery Tester
The BT705 Plus is designed for comprehensive battery health testing, supporting 12V and 24V systems. It performs various tests to assess the condition of different battery types, including Flooded (Regular), EFB, GEL, AGM Flat Plate, and Spiral batteries. It is suitable for a wide range of vehicles and equipment.
Image: The BT705 Plus display showing various battery health tests including State of Health (SOH), State of Charge (SOC), Charging Test, Voltage Test, Ripple Analysis, Cranking Test, Resistance Test, and Load Test.
Image: The BT705 Plus features a 2.8-inch color LCD display for easier navigation and clearer results, offering step-by-step guidance during testing.
Image: The BT705 Plus is compatible with 12V and 24V batteries, including EFB, GEL, Flooded, and AGM types, and can be used for Cars, RVs, SUVs, ATVs, Motorcycles, Tractors, Trucks, Boats, Mowers, and Yachts.
2.2 Monitor della batteria Bluetooth FOXWELL BT630 con shunt
The BT630 is a Bluetooth-enabled battery monitor designed for real-time tracking of battery performance. It supports high-current monitoring up to 600A and a wide voltage range from 10V to 120V. This device is ideal for RVs, EVs, marine systems, off-grid setups, portable power stations, and outdoor devices, providing critical data through a dedicated mobile application.
Image: The BT630 app displays real-time metrics such as Voltage, Current, Battery Level, Remaining Capacity, Estimated Time of Use, Estimated Full Time, Temperature, Power, Cumulative Charge, and Cumulative Discharge.
Image: The BT630 shunt features an 8-layer safety protection system, including safeguards against low voltage, oltre voltage, discharge overcurrent, charging overcurrent, overpower, over temperature, low temperature, and low State of Charge (SoC).
Image: The BT630 is engineered for high precision, featuring a built-in shunt with an error margin of only ±0.4% for accurate measurements.
3. Configurazione e installazione
3.1 FOXWELL BT705 Plus Car Battery Tester Setup
- Connetti Clamps: Ensure the vehicle ignition is off. Connect the red positive (+) clamp al terminale positivo della batteria e al polo negativo nero (-) clamp al terminale negativo.
- Accensione: The BT705 Plus will power on automatically once connected to the battery.
- Seleziona il tipo di batteria: Use the navigation buttons to select the correct battery type (e.g., Flooded, EFB, GEL, AGM) from the menu.
3.2 FOXWELL BT630 Bluetooth Battery Monitor with Shunt Installation
The BT630 requires careful installation of the shunt for accurate monitoring. Professional installation is recommended if you are unfamiliar with electrical systems.
- Montare lo shunt: Choose a dry, secure location near the battery bank for mounting the shunt. Ensure good ventilation.
- Scollegare la batteria: Before wiring, disconnect the negative terminal of your battery bank to prevent electrical hazards.
- Wire the Shunt:
- Connect the main negative cable from your battery bank to the 'BATTERY' terminal of the shunt.
- Connect the main negative cable from your load/charger system to the 'LOAD' terminal of the shunt.
- Connect the small positive wire from the BT630 unit to the positive terminal of your battery bank.
- Connect the small negative wire from the BT630 unit to the 'BATTERY' terminal of the shunt (or a dedicated negative terminal on the shunt if available for the monitor).
- Ricollegare la batteria: Once all wiring is secure, reconnect the main negative terminal of your battery bank.
- Installazione e associazione dell'app: Download the dedicated BMS app from your device's app store. Enable Bluetooth on your mobile device and pair with the BT630 monitor. Follow the in-app instructions for initial setup and calibration.
4. Istruzioni per l'uso
4.1 Operating the FOXWELL BT705 Plus Car Battery Tester
- Menu principale: After powering on, the main menu will appear. Use the 'MENU' and arrow buttons to navigate.
- Seleziona Test: Choose the desired test from options such as 'Battery Test', 'Cranking Test', 'Charging Test', 'Voltage Test', 'Ripple Analysis', 'Resistance Test', or 'Load Test'.
- Segui le istruzioni sullo schermo: The device provides step-by-step guidance for each test. For example, during a 'Cranking Test', it will prompt you to start the engine.
- View Risultati: After the test is complete, the results will be displayed on the screen. Interpret the State of Health (SOH), State of Charge (SOC), and other relevant metrics.
- Print/Save Results: If connected to a printer or computer (optional), you may be able to print or save test reports.
4.2 Operating the FOXWELL BT630 Bluetooth Battery Monitor
- Avvia l'app: Open the dedicated BMS app on your paired mobile device.
- Monitoraggio in tempo reale: The app will display real-time battery metrics including SOC%, Voltage, corrente, capacità residua, potenza, temperatura, tempo di esecuzione stimato e cronologia di carica/scarica.
- Grafici dei dati: View historical data and trends in clear graphical format to understand battery performance over time.
- Avvisi personalizzabili: Set up alerts for various parameters such as over/under-voltage, overcurrent, overpower, and temperature extremes. The app can notify you when these thresholds are met.
- Power Cutoff (Optional): If an external relay is integrated, the app can be configured to trigger a power cutoff based on predefined safety parameters.
- Calibrazione: The BT630 features dual-calibration precision. It uses an automatic error calibration system based on a long-term model database. Manual calibration for Voltage, Current, and Temperature can also be performed via the app for fine-tuning.
Image: The BT630 supports both automatic SOC calibration and manual calibration for Voltage, Current, and Temperature, allowing for precise adjustments.
5. Manutenzione
5.1 Cura generale
- Keep both devices clean and dry. Use a soft, damp panno per pulire le superfici. Non utilizzare detergenti abrasivi o solventi.
- Quando non vengono utilizzati, conservare i dispositivi in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Evitare di far cadere o di sottoporre i dispositivi a forti urti.
5.2 BT705 Plus Maintenance
- Ispezionare il test clampControllare regolarmente i cavi per individuare eventuali segni di danneggiamento, sfilacciamento o corrosione. Sostituirli se necessario.
- Ensure the display screen is free from scratches or cracks that could impair readability.
5.3 BT630 Maintenance
- Periodically check all wiring connections to the shunt and the BT630 unit to ensure they are secure and free from corrosion.
- Ensure the shunt's ventilation holes are clear of debris to maintain optimal thermal management.
- Keep the mobile app updated to the latest version for optimal performance and new features.
6. Risoluzione Dei Problemi
- Device Not Powering On (BT705 Plus): Garantire il clamps are correctly and securely connected to the battery terminals. Check battery voltage; se è troppo basso, il dispositivo potrebbe non accendersi.
- Inaccurate Readings (BT630): Verify all shunt wiring connections are correct and tight. Perform a manual calibration via the app if automatic calibration does not resolve the issue. Ensure the app is updated.
- Bluetooth Connectivity Issues (BT630): Ensure Bluetooth is enabled on your mobile device. Restart both the BT630 (by temporarily disconnecting power) and your mobile device. Ensure the BT630 is within range.
- Test Failure/Error Message (BT705 Plus): Refer to the specific error code or message displayed on the screen. This often indicates an issue with the battery, connections, or test parameters. Recheck connections and battery condition.
- Proactive Monitoring: The BT630's visualized data graphs can help detect potential battery issues up to 30 days in advance by monitoring trends in current, voltage, and temperature. Regularly review these graphs to preempt failures.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | VOLPE DI POMELLO |
| Numeri di modello | BT630, BT705 Plus |
| ASIN | B0FBRK7C78 |
| BT630 voltage Gamma | Da 10 V a 120 V |
| BT630 Current Monitoring | Fino a 600A |
| BT630 Shunt Error | ±0.4% |
| BT630 Power Consumption | 0.4 W (ultra-basso) |
| BT630 Safety Protection | 8-layer (Over/Under-voltage, Overcurrent, Overpower, Over/Low-temperature, Low SOC) |
| BT705 Plus Voltage Compatibilità | 12 V e 24 V |
| BT705 Plus Display | LCD a colori da 2.8 pollici |
| Data prima disponibilità | 2 giugno 2025 |
8. Garanzia e supporto
For warranty information, please refer to the documentation included with your product or visit the official FOXWELL websito. I termini e le condizioni della garanzia possono variare in base alla regione e al prodotto.
For technical support, troubleshooting assistance, or further inquiries, please visit the official FOXWELL support page or contact their customer service directly. Contact details are typically available on the FOXWELL websito.
