ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Introduzione

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Immagine 1.1: anteriore view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Informazioni sulla sicurezza

Per ridurre il rischio di incendi, scosse elettriche o lesioni personali, seguire sempre queste precauzioni di sicurezza di base:

• AVVERTENZA: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore di circuito prima dell'installazione o della manutenzione.
• Questo prodotto deve essere installato in conformità al codice di installazione applicabile da una persona a conoscenza della costruzione e del funzionamento del prodotto nonché dei pericoli connessi.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Assicurarsi che tutti i collegamenti siano sicuri e adeguatamente isolati.
• Questo apparecchio è adatto solo per uso interno.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Hardware di montaggio (viti, dadi per cavi)
• E26 Adapter Accessories (for recessed can installation)
• Manuale di istruzioni (questo documento)

Image 3.1: Included accessories for installation.

4. Caratteristiche del prodotto

• 3CCT selezionabile: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensore di movimento: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Ritardo regolabile: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensore di luce: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Efficienza energetica: 16W LED provides 1000 lumens of brightness.
• Installazione versatile: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Configurazione e installazione

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Rimuovere la lente ruotandola in senso orario.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Rimuovere la lente ruotandola in senso orario.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Istruzioni per l'uso

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funzionalità del sensore di movimento

• Giorno: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Assicurarsi che l'alimentazione sia spenta.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Assicurarsi che l'alimentazione sia spenta.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Manutenzione

The ECOELER LED ceiling light requires minimal maintenance.

• Pulizia: Assicurarsi che l'alimentazione sia spenta prima di pulire. Pulire l'apparecchio con un panno morbido, asciutto o leggermente asciutto.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lente: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Risoluzione Dei Problemi

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Specifiche

10. Garanzia e supporto

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER websito.

Produttore: ECOELER ELECTRIC INC