Reely RE-10045554

Manuale di istruzioni per il buggy a benzina Reely Carbon Fighter III Limited-Edition 1:6

Model: RE-10045554 | Brand: Reely

1. Prodotto finitoview

The Reely Carbon Fighter III Limited-Edition is a 1:6 scale Ready-to-Run (RtR) gasoline-powered buggy designed for off-road enthusiasts. This model features a powerful 2-stroke 26 CCM engine, an improved conical gear differential, and a 2.4 GHz radio control system for reliable operation. Its rear-wheel drive system allows for dynamic handling and power drifts, complemented by high-grip off-road tires suitable for various terrains. The vehicle also includes a stylish tuning exhaust system.

Reely Carbon Fighter III Limited-Edition 1:6 Gasoline Buggy, front-side view

Figura 1.1: Fronte view of the Reely Carbon Fighter III Limited-Edition 1:6 Gasoline Buggy.

Reely Carbon Fighter III Limited-Edition 1:6 Gasoline Buggy, front view

Figura 1.2: Davanti view of the Reely Carbon Fighter III Limited-Edition 1:6 Gasoline Buggy, showcasing its robust chassis and front bumper.

2. Istruzioni di sicurezza

Operating a gasoline-powered model car requires adherence to strict safety guidelines to prevent injury or damage. Please read and understand all instructions before use.

3. Cosa c'è nella scatola

Dopo aver disimballato, verificare che tutti i componenti elencati di seguito siano presenti e integri:

If any items are missing or damaged, please contact your retailer or Reely customer support immediately.

4. Impostazione

4.1 Preparazione del carburante

The Carbon Fighter III uses a 2-stroke gasoline engine. It requires a specific mixture of gasoline and 2-stroke oil. Refer to the engine manufacturer's recommendations for the correct mixing ratio (typically 25:1 or 33:1). Use high-quality unleaded gasoline and synthetic 2-stroke oil.

  1. Mix the gasoline and 2-stroke oil in a separate, approved fuel container.
  2. Carefully pour the mixed fuel into the buggy's fuel tank, ensuring not to overfill. Secure the fuel cap tightly.

4.2 Radio Control System Setup

The 2.4 GHz radio control system is pre-bound from the factory. Ensure fresh batteries are installed in the transmitter. Check the steering and throttle servo responses before starting the engine.

5. Operativo

5.1 Procedura di avviamento del motore

Always follow the engine manufacturer's starting instructions. Typically, this involves:

  1. Ensure the radio control system is on and functioning.
  2. Set the throttle trim to neutral and the choke to the 'ON' position (if applicable).
  3. Tirare la corda di avviamento con decisione e dolcezza finché il motore non si avvia.
  4. Once the engine starts, gradually move the choke to the 'OFF' position. Allow the engine to warm up for a few minutes before driving.

5.2 Guidare il Buggy

The Carbon Fighter III is equipped with rear-wheel drive, offering exciting power drifts and agile handling. Practice in an open area to familiarize yourself with its characteristics.

Reely Carbon Fighter III Limited-Edition 1:6 Gasoline Buggy in action on dirt

Figura 5.1: The Reely Carbon Fighter III in action, demonstrating its off-road capabilities and rear-wheel drive performance.

6. Manutenzione

Regular maintenance is crucial for the longevity and performance of your Reely Carbon Fighter III.

6.1 Manutenzione del motore

6.2 Chassis and Drivetrain

Sistema di scarico 6.3

The tuning exhaust system should be checked for secure mounting and any signs of damage or leaks. A loose exhaust can affect engine performance and create excessive noise.

Posteriore view of Reely Carbon Fighter III showing the exhaust system

Figura 6.1: Posteriore view of the Reely Carbon Fighter III, highlighting the tuning exhaust system and rear wing.

7. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your Reely Carbon Fighter III.

For persistent issues, consult a qualified RC hobby technician or contact Reely customer support.

8. Specifiche

Dimensioni del prodottoDimensioni: 80 x 43 x 24.5 cm
Peso dell'articolo10.81 kg
Numero di modelloRE-10045554
Tipo di motoreMotore a combustione a 2 tempi
Cilindrata del motore26 CCM
Potenza del motore1.18 kW / 1.6 CV
Tipo di unitàTrazione posteriore
sistema radio2.4 GHz
Tipo di materialeMetallo
ColoreNero

9. Garanzia e supporto

For information regarding warranty coverage, please refer to the documentation provided at the time of purchase or contact your retailer. Reely is committed to providing quality products and support.

For technical assistance, spare parts, or further inquiries, please visit the official Reely store or contact their customer service department.

Reely Store: Visit the Reely Store on Amazon.it

Documenti correlati - RE-10045554

Preview Navodila per l'uporabo modello RC Buggy Reely Carbon Fighter III
Utilizzato per il modello RC Buggy Reely Carbon Fighter III, 2WD RtR, 2,4 GHz. Vsebuje navodila zagon, delovanje, varnost, vzdrževanje in odpravljanje težav.
Preview Telecomando REELY HT-6 2,4 GHz - Manuale d'uso
Manuale d'uso completo per il telecomando REELY HT-6 da 2,4 GHz. Include istruzioni per la configurazione, programmazione, sicurezza e dati tecnici per modellismo.
Preview Istruzioni per l'uso del telecomando REELY GT2 EVO 2.4 GHz
Istruzioni per l'uso del sistema di controllo remoto REELY GT2 EVO da 2.4 GHz. Copre configurazione, sicurezza, funzionamento, manutenzione, risoluzione dei problemi e specifiche tecniche per modelli di veicoli e navi.
Preview Manuale utente del sistema di controllo remoto REELY HT-6 2.4 GHz
Manuale utente completo per il sistema di controllo remoto REELY HT-6 da 2.4 GHz, che descrive in dettaglio configurazione, funzionamento, programmazione, sicurezza e specifiche tecniche per aeromodelli ed elicotteri.
Preview Reely HT-10 10 canali 2.4 GHz Fernsteuerung Bedienungsanleitung
Alimentazione compatibile con il Reely HT-10 10 canali 2.4 GHz Fernsteuerung. Enthält Anleitungen zur Inbetriebnahme, Bedienung, Wartung und Fehlerbehebung.
Preview Istruzioni per l'uso del telecomando REELY GT2 EVO 2.4 GHz
Istruzioni operative complete per il sistema di controllo remoto REELY GT2 EVO da 2.4 GHz, che coprono la configurazione, il funzionamento, la sicurezza, la manutenzione e la risoluzione dei problemi per gli appassionati di modellismo.