Vention ADKB0-EU

VENTION Mini HDMI Wireless Transmitter and Receiver

Model: ADKB0-EU

Introduzione

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your VENTION Mini HDMI Wireless Transmitter and Receiver. This device allows for wireless transmission of 1080P@60Hz video and audio signals over a 5GHz connection, eliminating the need for long HDMI cables.

Please read this manual thoroughly before using the product to ensure proper functionality and to avoid any potential issues.

Cosa c'è nella scatola

Verificare che tutti gli articoli siano presenti nel pacco:

  • 1 x trasmettitore HDMI wireless
  • 1 x ricevitore HDMI wireless
  • 2 x USB-C Power Cords (0.5m)
  • 1 x Manuale utente
Contents of the VENTION Mini HDMI Wireless Transmitter and Receiver package, including the transmitter, receiver, two USB-C cables, and a user manual.

Image: Package contents showing the wireless HDMI transmitter, receiver, two USB-C power cables, and the user manual.

Istruzioni di installazione

The VENTION Mini HDMI Wireless system is designed for plug-and-play operation, requiring no software installation or complex network configuration.

  1. Connect the HDMI Receiver (RX): Insert the HDMI Receiver (RX) into an available HDMI port on your display device (TV, monitor, or projector). Connect one of the provided USB-C power cords to the RX unit and the other end to a power source (e.g., USB adapter, power bank, or a USB port on your display device).
  2. Adjust Input Source: On your display device, select the correct HDMI input source to match the port where the RX unit is connected. This will allow the display to receive the signal from the transmitter.
  3. Connect the HDMI Transmitter (TX): Insert the HDMI Transmitter (TX) into the HDMI output port of your source device (e.g., laptop, PC, gaming console, camera). Connect the second USB-C power cord to the TX unit and the other end to a power source (e.g., USB adapter, power bank, or a USB port on your source device).

Once both units are powered and connected, the system will automatically establish a wireless connection, and your content should appear on the display.

Diagram showing the connection steps for the VENTION wireless HDMI system. Step 1: Connect the HDMI Receiver (RX) to a display and power. Step 2: Adjust the input source on the display. Step 3: Connect the HDMI Transmitter (TX) to a computer and power.

Image: Step-by-step connection guide for the HDMI wireless transmitter and receiver.

Close-up image of the VENTION wireless HDMI units showing the dedicated USB-C power port and the included 0.5m USB-C cables.

Image: Detail of the USB-C power port on the units and the included power cables.

Istruzioni per l'uso

Mirror or Extend Mode

The system supports both Mirror and Extend display modes. The mode selection is typically managed through your source device's operating system display settings (e.g., Windows Display Settings, macOS System Preferences). Ensure your computer supports extended mode if you wish to use this feature.

  • Modalità specchio: Duplica lo schermo del dispositivo sorgente sul display collegato.
  • Modalità estesa: Extends your source device's desktop, allowing for a multi-monitor setup.
Diagram illustrating Mirror Mode and Extend Mode for display output. In Mirror Mode, the laptop screen is duplicated on the external monitor. In Extend Mode, the external monitor acts as a secondary, independent display.

Image: Visual representation of Mirror and Extend display modes.

Disconnessione/riconnessione con un clic

The system features a simple one-click function for disconnecting and reconnecting the wireless signal. This is useful for quickly switching presentations or sharing screens in a meeting environment without replugging cables. Refer to the TX unit for the specific button or indicator.

A person's hand pressing a button on the VENTION wireless HDMI transmitter connected to a laptop, with a large screen displaying data in the background, indicating a one-click disconnect/reconnect feature for efficient meetings.

Image: Demonstrating the one-click disconnect/reconnect feature during a meeting.

Gamma di trasmissione e stabilità

The device supports wireless transmission up to 50 meters (165 feet) in open environments, utilizing a 5GHz protocol for strong and stable signals. Actual performance may vary based on environmental factors such as walls and other obstructions.

An image depicting the VENTION wireless HDMI system transmitting a signal from a laptop to a large projector screen in a lecture hall, highlighting a transmission distance of 50 meters or 164 feet.

Image: Illustration of the 50-meter wireless transmission range in an open space.

Ampia compatibilità

The VENTION wireless HDMI system is compatible with a broad range of devices:

  • Dispositivi compatibili con il trasmettitore (TX): Laptops, PCs, gaming consoles, cameras, TV boxes, and any device with an HDMI output. For USB-C devices, ensure they support DisplayPort Alternate Mode (DP Alt Mode).
  • Receiver (RX) Compatible Devices: Smart TVs, monitors, projectors, and any display device with an HDMI input.
Diagram showing the multi-compatibility of the VENTION wireless HDMI system. The transmitter can connect to cameras, TV boxes, PCs, laptops, and gaming consoles. The receiver can connect to projectors, TVs, and monitors.

Image: Compatibility chart for various source and display devices.

Manutenzione

To ensure the longevity and optimal performance of your VENTION Mini HDMI Wireless Transmitter and Receiver, follow these maintenance guidelines:

  • Pulizia: Use a soft, dry cloth to clean the devices. Avoid using liquid cleaners, aerosols, or solvents.
  • Magazzinaggio: Conservare i dispositivi in ​​un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
  • Gestione: Maneggiare le unità con cura. Evitare di farle cadere o di sottoporle a forti urti.
  • Alimentazione elettrica: Always use the provided USB-C power cords and ensure a stable power source. Insufficient power can lead to unstable performance.
  • Ventilazione: Assicurarsi che le unità abbiano una ventilazione adeguata durante il funzionamento per evitare il surriscaldamento.

Risoluzione dei problemi

If you encounter issues with your VENTION Mini HDMI Wireless system, refer to the following common problems and solutions:

ProblemaPossibile causaSoluzione
No signal or display on screen
  • Collegamenti allentati
  • Potenza insufficiente
  • È stata selezionata la sorgente di ingresso errata
  • Interferenza
  • Check all HDMI and USB-C connections.
  • Ensure both TX and RX units are properly powered.
  • Verificare che sul display sia selezionato l'ingresso HDMI corretto.
  • Ridurre la distanza tra TX e RX, rimuovere gli ostacoli.
Poor video quality or latency
  • Distanza eccessiva
  • Obstructions (walls, furniture)
  • Strong wireless interference
  • Source device output issues
  • Avvicinare TX e RX l'uno all'altro.
  • Se possibile, assicurarsi che la visuale sia libera.
  • Avoid placing near other 5GHz wireless devices.
  • Check source device's display settings.
Units feel warm during operationFunzionamento normaleThis is normal for electronic devices during use. Ensure adequate ventilation and do not cover the units.
USB-C device not transmittingDevice does not support DP Alt ModeEnsure your USB-C source device supports DisplayPort Alternate Mode for video output. Not all USB-C ports support video.

Specifiche

CaratteristicaSpecificazione
MarcaVention
Numero di modelloADKB0-EU
ColoreNero
Risoluzione1080p@60Hz (Ultra HD)
Frequenza senza fili5GHz
Gamma di trasmissioneFino a 50 metri (165 piedi) in aree aperte
ConnettivitàHDMI, USB-C (for power)
Caratteristiche specialiPlug and Play, Mirror/Extend Mode, Miracast
Dimensioni del prodotto7.3L x 2.6W x 1.1H centimetri
PesoApproximately 60g per unit
Image showing the compact size of the VENTION wireless HDMI unit, with dimensions 25.8 x 12 x 3 mm (1.02 x 0.47 x 0.12 inches) and a weight of 60g, fitting easily into a small pouch.

Image: The compact and lightweight design of the wireless HDMI units.

Informazioni sulla garanzia

This VENTION product comes with a Garanzia del produttore di 1 anni dalla data di acquisto. La presente garanzia copre i difetti di materiali e di fabbricazione in condizioni di normale utilizzo. Non copre i danni causati da uso improprio, incidenti, modifiche non autorizzate o cause esterne.

Conservare la prova d'acquisto per eventuali richieste di garanzia.

Assistenza clienti

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact VENTION customer support through the retailer where you purchased the product or visit the official VENTION websito per le informazioni di contatto.

Documenti correlati - ADKB0-EU

Preview Manuale utente del trasmettitore e ricevitore HDMI wireless VENTION VWS-H70
Manuale utente per il trasmettitore e ricevitore HDMI wireless VENTION VWS-H70 (serie ADK). Scopri di più su configurazione, associazione, domande frequenti e specifiche tecniche per il mirroring wireless dello schermo fino a 1080P a 60Hz. Include informazioni sulla conformità FCC.
Preview Manuale utente del trasmettitore e ricevitore HDMI wireless Vention
Manuale utente per il trasmettitore e ricevitore HDMI wireless Vention (modello: ADC), con dettagli sull'installazione hardware, istruzioni di associazione, domande frequenti e informazioni sulla conformità FCC. Supporta una risoluzione di 1080p a 60 Hz e una portata effettiva di 40 m.
Preview Manuale utente del trasmettitore e ricevitore HDMI wireless di livello aziendale Vention
Manuale utente per il trasmettitore e ricevitore HDMI wireless Vention Enterprise-Grade (modello: VWS-H71). Include specifiche, schemi di collegamento, istruzioni di associazione, software di casting, risoluzione dei problemi e informazioni sulla conformità FCC.
Preview Venzione Cavo di alimentazione del cavo HDMI Cavo di alimentazione VWS-A97
L'adattatore è compatibile con il prodotto del cavo HDMI Vention (VWS-A97), prodotti pop-up, parametri, impostazioni, installazioni e applicazioni. Supporta 1080P 60Hz e produce un'area di 60 m con cavo CAT5E/CAT6.
Preview Manuale utente del trasmettitore e ricevitore HDMI wireless Vention VWS-H96
Manuale utente completo per il trasmettitore e ricevitore HDMI wireless Vention VWS-H96. Include specifiche, istruzioni di configurazione, guida all'associazione, domande frequenti e dettagli sulla conformità FCC per un mirroring dello schermo senza interruzioni.
Preview Manuale utente del trasmettitore e ricevitore video HDMI wireless Vention VWS-102
Manuale utente per il trasmettitore e ricevitore video HDMI wireless Vention VWS-102, con specifiche dettagliate, informazioni sul prodottoview, contenuto della confezione, funzioni di mirroring dello schermo, istruzioni per l'associazione, dichiarazione di conformità FCC e informazioni sul produttore.