Introduzione
This manual provides comprehensive instructions for the Anderic TRA049G1M replacement remote control, designed for use with specific Harbor Breeze ceiling fan models. Please read this guide thoroughly to ensure proper setup and operation of your new remote control.
Prodotto finitoview
The Anderic TRA049G1M is a direct replacement for original Harbor Breeze TRA049G1M and 2AQZU-18052 remotes. It features a user-friendly button layout for controlling fan speeds, light functions, and special modes. The remote is designed to fit into a wall mount bracket for convenient access.
Figure 1: Front of Anderic TRA049G1M Remote Control. The remote features buttons for fan off, fan high, fan medium, fan low, on/off light control & dimmer, 1 min delay for lights off, random fan speed cycling, and random lights on/off. The FCC ID 2AQZU-18052 is printed at the top, and a QR code for support is at the bottom. For more information, scan the QR code or visit https://qr.link/CpbUBA.
Compatibilità
This remote control is compatible with the following models and kits:
- Works with Summersville collection Ceiling Fans | 4L000015190 (KIT), MRAC04S1M-LD-F0 (RECEIVER)
- Operates on 304.25 MHz frequency
- Compatible with 4L000015190 kit and MRAC04S1M-LD-F0 receiver
- Replaces original Harbor Breeze TRA049G1M & 2AQZU-18052 remote
Impostare
Installazione della batteria
The Anderic TRA049G1M remote control requires one A23 battery (sold separately). Follow these steps to install the battery:
- Individuare il coperchio del vano batterie sul retro del telecomando.
- Per aprire il coperchio della batteria, farlo scorrere verso il basso.
- Insert one A23 battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Far scorrere il coperchio della batteria in posizione finché non scatta in modo sicuro.
Figure 2: Battery Compartment of Anderic TRA049G1M Remote Control. The image shows the back of the remote with the battery cover removed, revealing the single A23 battery slot. The FCC ID 2AQZU-18052 is also visible at the top.
Accoppiamento/sincronizzazione
The Anderic TRA049G1M remote control is typically a direct replacement and may not require explicit pairing if your existing fan receiver is already configured for this model. If your fan does not respond after battery installation, refer to your ceiling fan's original instruction manual for specific pairing or syncing procedures, as these steps are usually performed at the fan receiver unit.
Istruzioni per l'uso
Familiarizza con i pulsanti del telecomando e le loro funzioni:
| Pulsante | Funzione |
|---|---|
| Power (Fan Off) | Spegne il ventilatore a soffitto. |
| Light (On/Off Light Control & Dimmer) | Turns the fan light on or off. Press and hold to dim or brighten the light. |
| Ventola alta | Imposta la velocità della ventola su alta. |
| 1 Min Delay (Lights Turn Off) | Press for a 1-minute delay before the lights turn off. |
| Ventola media | Imposta la velocità della ventola su media. |
| Random Fan Speed Cycling | Press to activate random fan speed cycling, providing varied airflow. |
| Ventola bassa | Imposta la velocità della ventola su un valore basso. |
| Random Lights On/Off | Press to activate random lights on/off, simulating occupancy. |
Manutenzione
Sostituzione della batteria
When the remote control's range decreases or buttons become unresponsive, it may be time to replace the battery. The remote uses one A23 battery.
- Aprire il coperchio del vano batterie sul retro del telecomando.
- Rimuovere la vecchia batteria A23.
- Insert a new A23 battery, observing the correct polarity (+/-).
- Chiudere saldamente il coperchio del vano batterie.
- Smaltire la vecchia batteria in modo responsabile, nel rispetto delle normative locali.
Risoluzione dei problemi
- Il telecomando non risponde:
- Controllare che la batteria sia installata correttamente e abbia una carica sufficiente. Sostituirla se necessario.
- Assicurarsi che non vi siano ostacoli tra il telecomando e il ricevitore del ventilatore.
- Verify the fan's power supply is on.
- If the remote is new or has been reset, refer to the fan's original manual for pairing instructions.
- Le luci non si abbassano:
- Ensure the light bulbs installed in your fan are dimmable. Non-dimmable bulbs will not respond to the dimmer function.
- Press and hold the light button to activate the dimming feature.
- Fan not changing speeds:
- Confirm the fan is receiving power.
- Try pressing the fan speed buttons multiple times.
Specifiche
- Modello: Anderic TRA049G1M
- Frequenza: 304.25 MHz
- Tipo di batteria: 1 x A23 (12V) (not included)
- Compatibilità: Harbor Breeze 2AQZU-18052, TR326A 2AQZU-18007, Summersville collection Ceiling Fans (4L000015190 KIT, MRAC04S1M-LD-F0 RECEIVER)
Garanzia e supporto
For warranty information or technical support, please contact Anderic customer service. Keep your purchase receipt as proof of purchase. You may also find additional resources by scanning the QR code on the back of your remote or visiting the provided link: https://qr.link/CpbUBA.
