hygger 46W LED Aquarium Light Instruction Manual

1. Introduzione e oltreview

The hygger 46W LED Aquarium Light (Model HG160) is designed to provide optimal lighting for freshwater aquariums ranging from 35 to 41 inches. This full-spectrum light features advanced LED technology, multiple operating modes, and intelligent functions to support plant growth and enhance the vibrant colors of your aquatic life.

Caratteristiche principali:

• Heavy-duty Design: Crafted with a premium aluminum alloy shell for exceptional heat dissipation. Features a silicone-sealed lens for IP68 waterproof protection. Includes an LCD remote and extendable brackets for secure fit on 35-41 inch aquariums.
• High Quality LED: Equipped with a powerful 5050 RGB and 2835 LED array (180 total LEDs: 116 White, 7 Red, 16 Blue, 7 Green, 36 RGB). Delivers 1459 lumens, a Color Rendering Index (CRI) > 90, and a dedicated color temperature of 15745K.
• Modalità fai da te: Allows customization of timing, 8 colors (White, Blue, Red, Green, Yellow, Azure, Orange, Purple), and 10 brightness levels (10%–100%) to create unique lighting scenes.
• Modalità predefinita 24/7: Provides a hands-free natural cycle, automatically transitioning through dawn, daylight, dusk, and moonlight phases from 6:00 AM to 11:00 PM.
• Smart Memory & Reliable Operation: Features intelligent power recovery, restoring previous settings after a power outage. The system seamlessly resumes the 24/7 automatic cycle if no adjustment is made within 5 minutes of reboot.

Image: The hygger 46W LED Aquarium Light installed on a freshwater aquarium, showcasing its full spectrum illumination over aquatic plants and fish.

2. Configurazione e installazione

Contenuto della confezione:

• hygger 46W LED Aquarium Light fixture
• Telecomando LCD
• Extendable Brackets (2)
• Adattatore di alimentazione

Fasi di installazione:

1. Attach the extendable brackets to both ends of the light fixture. Ensure they are securely fastened.
2. Place the light fixture on top of your aquarium, adjusting the brackets to fit the tank's width (35-41 inches).
3. Connect the power adapter to the light fixture and then plug it into a power outlet.
4. The light will power on in a default mode. Refer to the 'Operating Modes' section to customize settings.

Image: Illustration of the adjustable extendable brackets, demonstrating how they fit different aquarium sizes.

Immagine: Primo piano view of the IP68 waterproof design, highlighting the silicone-sealed LEDs that protect against water vapor and droplets.

3. Modalità operative e controllo

The hygger 46W LED Aquarium Light offers various modes to suit your aquarium's needs, all controlled via the included LCD remote.

Image: Detailed diagram of the LCD Remote Controller, labeling each button and its function for easy navigation and setting adjustments.

3.1. 24/7 Default Mode

This mode simulates a natural 24-hour light cycle, gradually transitioning from dawn to daylight, dusk, and moonlight. It automatically turns on at 6:00 AM and off at 11:00 PM.

1. Press the '24/7' button on the remote to activate this mode.
2. The light will follow the preset schedule.
3. To adjust the local time, long-press the 'SET' button for 3 seconds. Use the up/down arrows to set the current hour and minute, pressing 'SET' to switch between them and confirm.

Image: A graph illustrating the 24/7 mode's light intensity and color temperature changes throughout a natural day-night cycle.

3.2. Modalità fai da te

The DIY mode allows you to customize up to 5 time segments (L1-L5) with specific start times, colors, brightness levels, and end times.

1. Press and hold the 'DIY/OK' button for 3 seconds to enter DIY mode.
2. Press and hold the 'SET' button for 3 seconds to enter the settings.
3. For each segment (L1-L5) in sequence:
   • Premere /▼ to set the start time (press 'SET' to switch between hours/minutes), then press 'SET' to confirm.
   • Briefly press the 'COLOR' button to select a color, then press 'SET' to confirm.
   • Briefly press the brightness button (light bulb icon) to adjust brightness, then press 'SET' to confirm.
   • Premere brevemente /▼ to set the end time for the current segment, then press 'DIY/OK' to proceed to the next segment.
4. After setting L5, briefly press the 'DIY/OK' button to save all settings.

Image: Visual representation of the DIY 5 Stages Mode, showing how different light colors and intensities can be programmed across five distinct time segments.

3.3. Modalità giorno

In Day Mode, the light provides full-spectrum white light. You can set a specific start and end time for this mode and adjust its brightness.

1. Press the 'Day Mode' button (sun icon) on the remote.
2. To set the timer, long-press the 'SET' button for 3 seconds.
3. Utilizzo /▼ to set the start time (hours/minutes), press 'SET' to confirm.
4. Adjust the brightness using the brightness button (light bulb icon), then press 'SET' to confirm.
5. Utilizzo /▼ to set the end time (hours/minutes), then press 'SET' to confirm.

Image: The controller displaying options for Day Mode, Night Mode, and a combined Daylight & Moonlight Mode, illustrating the different lighting environments.

3.4. Modalità notturna

Night Mode provides a fixed blue light, with adjustable brightness, to simulate moonlight. You can set a specific start and end time for this mode.

1. Press the 'Night Mode' button (moon icon) on the remote.
2. To set the timer, long-press the 'SET' button for 3 seconds.
3. Utilizzo /▼ to set the start time (hours/minutes), press 'SET' to confirm.
4. Adjust the brightness using the brightness button (light bulb icon), then press 'SET' to confirm.
5. Utilizzo /▼ to set the end time (hours/minutes), then press 'SET' to confirm.

3.5. Funzione di memoria intelligente

The light features intelligent power recovery. In the event of a power outage, it will automatically restore all previous settings. After power is restored, you may need to reset the local time. If no adjustments are made within 5 minutes, the system will seamlessly resume the 24/7 automatic cycle.

Image: Visual explanation of the Smart Power-Off Protection and Memory Function, showing how the light restores settings after a power interruption.

4. Specifiche

Image: A comprehensive table detailing product specifications across various wattage models, including LED quantity, length, lumens, color temperature, and application range.

5. Manutenzione e cura

To ensure the longevity and optimal performance of your hygger LED Aquarium Light, follow these maintenance guidelines:

• Pulizia: Regularly wipe the light fixture and lens with a soft, damp cloth to remove dust, water spots, and algae buildup. Ensure the light is unplugged before cleaning. Do not use harsh chemicals or abrasive materials.
• Dissipazione del calore: Ensure the aluminum alloy shell's fin-like texture is not obstructed to allow for proper heat dissipation. Avoid placing objects on top of the light fixture.
• Esposizione all'acqua: While the light is IP68 waterproof, the controller unit is not. Keep the controller dry and away from water splashes.
• Gestione dei cavi: Ensure all cables are routed safely and are not pinched or exposed to excessive tension.

6. Risoluzione Dei Problemi

If you encounter any issues with your hygger LED Aquarium Light, please refer to the following common troubleshooting steps:

• La luce non si accende:
  • Check if the power adapter is securely plugged into both the light fixture and the power outlet.
  • Verificare che la presa di corrente funzioni collegandovi un altro dispositivo.
  • Ensure the light is not in 'OFF' state or a programmed 'OFF' period in 24/7 or DIY mode.
• Settings Not Saving After Power Outage:
  • The light has a smart memory function. After a power outage, it should restore previous settings. However, the local time may need to be reset manually.
  • If settings are not restored, ensure you pressed 'SET' or 'DIY/OK' to confirm settings after making changes.
• Visualizzazione dell'ora errata:
  • Long-press the 'SET' button for 3 seconds to enter time setting mode. Adjust hours and minutes using the /▼ buttons and confirm with 'SET'.
• Light Intensity Too Low/High:
  • In Day or Night mode, adjust brightness using the brightness button (light bulb icon).
  • In DIY mode, ensure the brightness levels for each segment (L1-L5) are set correctly.

If the issue persists after following these steps, please contact hygger customer support for further assistance.