1. Introduzione
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your VEVOR Electric Wire Stripper Machine, model ZD-40FL. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.
The VEVOR ZD-40FL is designed for stripping insulation from various types of wires, including copper and industrial cables, with diameters ranging from 1.5 mm to 40 mm (0.06 to 1.57 inches). It features 11 feed channels and supports both electric and manual operation modes.
2. Istruzioni di sicurezza
Osservare sempre le seguenti precauzioni di sicurezza per ridurre il rischio di scosse elettriche, incendi e lesioni gravi.
- Leggi tutte le istruzioni: Familiarize yourself with the machine's operation and safety features before use.
- Indossare dispositivi di protezione individuale (DPI): Always wear safety glasses, gloves, and appropriate work clothing. Avoid loose clothing or jewelry that could get caught in moving parts.
- Area di lavoro: Assicurarsi che l'area di lavoro sia pulita, ben illuminata e libera da ingombri. Non utilizzare la macchina in damp o in condizioni di bagnato.
- Alimentazione elettrica: Collegare la macchina a una presa di corrente con messa a terra e con la tensione correttatage (110V). Do not modify the plug.
- Tenere lontani i bambini: Do not allow children or untrained personnel to operate or be near the machine.
- Arresto di emergenza: Locate and understand the function of the emergency stop button. In case of an emergency, press it immediately to cut power.
- Ispezionare i fili: Ensure wires are free from kinks, bends, or foreign objects before feeding them into the machine.
- Manutenzione: Scollegare l'alimentazione elettrica prima di effettuare qualsiasi intervento di manutenzione, regolazione o pulizia.
- Evitare il sovraccarico: Do not force the machine or attempt to strip wires beyond its specified capacity.
3. Prodotto finitoview
The VEVOR ZD-40FL Electric Wire Stripper Machine is designed for efficient and precise wire insulation removal. It features a robust construction and user-friendly controls.
Immagine: Oltreview of the VEVOR Electric Wire Stripper Machine, highlighting its 11 independent channels and wire diameter range from 0.06 to 1.57 inches.
Componenti chiave:
- Canali di alimentazione: 11 channels for various wire diameters (1.5-40 mm).
- Manopola di regolazione della lama: Controls the depth of the cutting blade.
- Pulsante di arresto di emergenza: Instantly cuts power to the machine.
- Motore: 370W copper motor for electric operation.
- Manovella: Per funzionamento manuale.
- V-Groove Rollers: Designed to grip wires securely and prevent slipping.
- Lame: HRC50 hardened steel blades for durability and sharp cutting.
4. Impostazione
Follow these steps to set up your wire stripping machine:
- Disimballaggio: Estrarre con cautela la macchina dall'imballaggio. Verificare la presenza di eventuali danni causati dal trasporto. Conservare l'imballaggio per un trasporto o uno stoccaggio futuri.
- Posizionamento: Place the machine on a stable, level, and sturdy workbench or surface. Ensure there is adequate space around the machine for safe operation and wire handling.
- Collegamento elettrico: Connect the power cord to a grounded 110V electrical outlet. Ensure the emergency stop button is engaged (pushed in) before connecting power.
- Controllo iniziale della lama: Verify that the blades are clean and properly seated.
5. Istruzioni per l'uso
This section details how to operate the wire stripping machine safely and effectively.
5.1 Selecting the Correct Feed Channel
The machine has 11 feed channels designed for different wire diameters. Choose the channel that best fits your wire without excessive play. A snug fit ensures optimal stripping performance and prevents wire damage.
Image: Detail of the 11 feed channels, illustrating how to select the appropriate channel for different wire sizes.
5.2 Regolazione dell'altezza della lama
The blade height determines the cutting depth. Adjust it carefully to cut through the insulation without damaging the inner copper wires.
- Allentare le manopole di regolazione: Loosen the two top adjustment knobs.
- Regola l'altezza: Turn the knobs to raise or lower the blade assembly. A higher blade cuts less deeply, a lower blade cuts deeper.
- Test: Perform a test strip on a scrap piece of wire. The insulation should be cut cleanly, and the copper conductor should remain intact.
- Stringere le manopole: Once the desired depth is achieved, securely tighten the adjustment knobs.
Image: Instructions for adjusting blade height and horizontal position for precise cutting.
5.3 Operating Modes: Electric and Manual
The machine offers two modes of operation:
Image: Illustration of the dual operation modes: manual hand crank for precise stripping and electric mode for fast, effortless stripping.
Modalità elettrica:
- Ensure the emergency stop button is released (pulled out).
- Press the green power button to start the motor.
- Carefully feed the wire into the selected channel. The machine will pull the wire through and strip the insulation.
- Guide the wire straight to prevent jamming.
- After stripping, press the red power button or the emergency stop button to turn off the machine.
Modalità manuale:
For manual operation, ensure the machine is unplugged from the power source. Attach the hand crank to the designated shaft. Feed the wire into the appropriate channel and turn the hand crank to pull the wire through and strip it.
5.4 Arresto di emergenza
In case of a jam, malfunction, or any unsafe condition, immediately press the red emergency stop button. This will cut power to the motor and stop all moving parts.
6. Manutenzione
Regular maintenance ensures the longevity and optimal performance of your wire stripping machine. Always disconnect the power before performing any maintenance.
- Pulizia: After each use, clean the machine to remove any wire debris or insulation fragments. Use a brush or compressed air. Do not use water or harsh chemicals.
- Ispezione della lama: Regularly inspect the blades for sharpness and damage. Dull or damaged blades can lead to poor stripping quality and increased effort. Replace blades as needed.
- Ispezione dei rulli: Check the V-groove rollers for wear or damage. Ensure they rotate freely and grip wires effectively.
- Lubrificazione: Periodically apply a small amount of machine oil to moving parts, such as gears and shafts, to ensure smooth operation.
- Magazzinaggio: Store the machine in a dry, clean, and secure location, away from moisture and extreme temperatures.
7. Risoluzione Dei Problemi
If you encounter issues with your wire stripping machine, refer to the following troubleshooting guide:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La macchina non si avvia | No power; Emergency stop engaged; Motor fault. | Check power connection; Release emergency stop button; Contact support. |
| Il filo non si spella in modo pulito | Incorrect blade height; Dull blades; Wrong feed channel. | Adjust blade height; Replace blades; Select appropriate feed channel. |
| Wire jams frequently | Wire is bent or kinked; Incorrect feed channel; Blades misaligned. | Straighten wire before feeding; Use correct channel; Inspect blade alignment (contact support if unable to resolve). |
| Rumore eccessivo durante il funzionamento | Lack of lubrication; Loose components; Motor issue. | Lubricate moving parts; Check for loose screws/bolts; Contact support for motor inspection. |
| Copper conductor is damaged | Blade height too low; Blades are dull or chipped. | Raise blade height slightly; Replace blades. |
8. Specifiche
Technical specifications for the VEVOR Electric Wire Stripper Machine ZD-40FL:
Image: Dimensional drawing of the VEVOR Electric Wire Stripper Machine.
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | ZD-40FL |
| Applicable Stripping Wire Diameter | 1.5 - 40 mm (0.06 - 1.57 pollici) |
| Potenza nominale | 370 W (1/2 HP) |
| Number of Wire Feed Channels | 11 |
| Materiale di base | Q235 |
| Bearing Seat Material | ADC12 |
| Materiale della lama | 65Mn (HRC50 Hardness) |
| Main Shaft & Rollers Material | Acciaio 45# |
| Peso del prodotto | 24.5 kg (54.01 libbre) |
| Dimensioni del prodotto (L x P x A) | 515 x 170 x 318 mm (20.28 x 6.69 x 12.52 pollici) |
| Colore | Grigio |
| Certificazione | Direttiva RoHS |
| Codice UPC | 197988905141 |
9. Garanzia e supporto
This VEVOR product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official VEVOR websito.
If you require technical assistance, have questions about operation, or need to report a defect, please contact VEVOR customer support. Have your model number (ZD-40FL) and purchase information ready when contacting support.