1. Introduzione
This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your VEVOR Electric Wire Stripper Machine. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
The VEVOR Electric Wire Stripper Machine is designed for efficiently stripping insulation from various types of wires and cables, ranging from 0.06 to 1.57 inches (1.5 to 40 mm) in diameter. It features 11 independent feed channels and offers both electric and manual operation modes, making it suitable for a variety of applications including home use, DIY projects, garages, and small workshops.
2. Istruzioni di sicurezza
ATTENZIONE: la mancata osservanza di queste istruzioni di sicurezza può provocare lesioni gravi o mortali.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the machine.
- Assicurarsi che la macchina sia posizionata su una superficie stabile e piana per evitare che si ribalti durante il funzionamento.
- Keep hands, hair, loose clothing, and jewelry away from moving parts, especially the blades and rollers.
- Scollegare l'alimentazione elettrica prima di effettuare qualsiasi regolazione, manutenzione o quando la macchina non è in uso.
- Non utilizzare la macchina in ambienti umidi oamp condizioni.
- Never force wire into the feed channels. Select the appropriate channel for the wire diameter.
- In case of an emergency, immediately press the emergency stop button.
- Tenere i bambini e il personale non autorizzato lontano dall'area operativa.
- Assicurare una ventilazione adeguata durante il funzionamento della macchina.
3. Componenti del prodotto
Familiarize yourself with the main components of your wire stripping machine:
- Motore: Fornisce energia per il funzionamento elettrico.
- Canali di alimentazione: Multiple openings for various wire diameters.
- Lame: High-strength steel blades for cutting insulation.
- Rulli: Dual V-groove rollers for gripping and feeding wire.
- Blade Adjustment Knobs: For adjusting blade height and stripping depth.
- Manual Hand Crank: Per funzionamento manuale.
- Pulsante di arresto di emergenza: Per l'arresto immediato.
- Interruttore di alimentazione: Per accendere/spegnere la macchina.
Figura 3.1: Principale view of the VEVOR Electric Wire Stripper Machine, showing its overall design and components.
4. Impostazione
- Disimballaggio: Carefully remove the machine from its packaging. Inspect for any damage during transit. Retain packaging for future storage or transport.
- Posizionamento: Position the wire stripper on a sturdy, level workbench or table. Ensure there is sufficient space around the machine for safe operation and wire handling.
- Collegamento elettrico: For electric operation, connect the power cord to a grounded electrical outlet with the correct voltage (110V). Ensure the power switch is in the 'OFF' position before plugging in.
- Regolazione della lama:
- Identify the blade adjustment knobs located on top of the machine.
- Turn the knobs to raise or lower the blades. The goal is to set the blade depth so it cuts through the wire insulation without damaging the copper core.
- Test with a scrap piece of wire to find the optimal setting. The blade should score the insulation cleanly.
Figure 4.1: A hand feeding a cable into one of the 11 independent channels, demonstrating the machine's versatility for various wire diameters.
Figure 4.2: Detailed diagram illustrating the 11 feed channels and their corresponding wire diameter ranges, from 0.06 to 1.57 inches.
5. Istruzioni per l'uso
- Seleziona il canale di feed: Choose the appropriate feed channel based on the diameter of the wire you intend to strip. The machine has 11 channels to accommodate wires from 0.06 to 1.57 inches.
- Regola la profondità della lama: Fine-tune the blade adjustment knobs to ensure the blade scores the insulation without cutting into the conductor. A slight score is sufficient for effective stripping.
- Scegli la modalità operativa:
- Modalità elettrica: Ensure the machine is plugged in and the power switch is 'ON'. The motor will drive the rollers.
- Modalità manuale: If operating manually, ensure the machine is unplugged. The clutch disengages for smooth hand-crank operation. Attach the hand crank to the designated shaft.
- Alimenta il filo: Insert the end of the wire into the selected feed channel. For electric mode, the rollers will pull the wire through. For manual mode, turn the hand crank to feed the wire.
- Recuperare il filo spelato: As the wire passes through, the insulation will be cut and separated. Collect the stripped wire and insulation from the output side.
- Arresto di emergenza: In case of any malfunction or hazard, immediately press the red emergency stop button to halt all machine operations.
Figure 5.1: The VEVOR wire stripper demonstrating both manual hand crank operation for precise control and electric mode for fast, effortless stripping.
Figura 5.2: Un primo piano view of the prominent red emergency stop button, designed for quick and secure machine shutdown.
6. Manutenzione
Una manutenzione regolare garantisce la longevità e le prestazioni ottimali della vostra spelafili.
- Pulizia: After each use, clean the machine to remove any accumulated wire fragments or insulation debris. Use a brush or compressed air. Ensure the machine is unplugged before cleaning.
- Ispezione della lama: Periodically inspect the blades for sharpness and damage. Dull or damaged blades can lead to inefficient stripping and potential wire damage. Replace blades as needed.
- Lubrificazione: Apply a small amount of machine oil to moving parts, such as rollers and gears, to ensure smooth operation and prevent rust. Do not over-lubricate.
- Magazzinaggio: Quando non viene utilizzata, conservare la macchina in un ambiente asciutto e pulito.
Figure 6.1: Illustration emphasizing the sharp cutting edge and HRC50 hardness of the blades, indicating their durability for long-term use.
7. Risoluzione Dei Problemi
Per i problemi più comuni e le relative soluzioni, fare riferimento alla seguente tabella:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Machine does not turn on (Electric Mode) | No power supply; Power switch off; Emergency stop engaged. | Check power connection; Turn power switch on; Disengage emergency stop. |
| Il filo non si spella in modo pulito | Incorrect blade depth; Dull or damaged blades; Wrong feed channel. | Adjust blade depth; Replace blades; Select appropriate feed channel. |
| Wire jams in machine | Wire too large for channel; Blade depth too deep; Debris in rollers. | Use correct channel; Adjust blade depth; Clean rollers and channels. |
| Surriscaldamento del motore | Continuous heavy load; Poor ventilation. | Allow machine to cool; Ensure adequate ventilation; Reduce load. |
8. Specifiche
Key technical specifications for the VEVOR Electric Wire Stripper Machine:
| Specificazione | Dettaglio |
|---|---|
| Numero modello articolo | ZD-40FL |
| Applicable Stripping Wire Diameter | 0.06-1.57 pollici / 1.5-40 mm |
| Potenza nominale | 1/2 HP / 370 W |
| Number of Wire Feed Channels | 11 |
| Materiale di base | Q235 |
| Bearing Seat Material | ADC12 |
| Materiale della lama | 65 milioni |
| Main Shaft & Rollers Material | Acciaio 45# |
| Peso del prodotto | 54.01 libbre / 24.5 kg |
| Dimensioni del prodotto (L x P x A) | 20.28 x 6.69 x 12.52 pollici / 515 x 170 x 318 mm |
Figure 8.1: Detailed diagram outlining the physical dimensions and key material specifications of the VEVOR Electric Wire Stripper Machine.
9. Garanzia e supporto
Per informazioni sulla garanzia, supporto tecnico o richieste di assistenza, fare riferimento alle informazioni di contatto fornite con l'acquisto o visitare il sito ufficiale VEVOR websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.