AXIS CP11W Window Camera User Manual

AXIS CP11W Window Camera

Sopraview

The InstaVision AI Window Camera installs via a magnetic tile connection, then is configured in the InstaVision app for Bluetooth-based device discovery and Wi‑Fi connectivity so you can view la ripresa in diretta della telecamera.

Specifiche

Quick Setup & Use

1. Install the ceramic (porcelain) tile: tear off the surface paper, paste the tile at the appropriate window position, ensure it is firmly attached and flat, and make sure the side with the magnetic ring faces into the room.
2. Connect the camera: bring the camera’s magnetic-ring side close to the tile’s magnetic ring and complete connection via magnetic adsorption; ensure the camera is firmly installed and angled as required.
3. Install the InstaVision app on your iPhone/Android.
4. Open the app, register or log in, then go to Home Page > Add Camera and follow the preparation instructions to power on the camera properly.
5. Enable Bluetooth access when prompted (required for discovery via BLE). If the device is not found, long press the reset button for 5 seconds to restore factory settings and try again.
6. Connect to Wi‑Fi: select a nearby 2.4 GHz & 5 GHz Wi‑Fi network, enter the password, and wait for connection confirmation sound.
7. Open the main interface to view Vivere View (live camera feed).

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Descrizione dell'interfaccia

1. Pulsante di reset
2. Slot per scheda TF
3. Alimentazione
The working state of the device, long press
5 seconds to restore the factory settings,
the camera will have a voice prompt
trasmissione.
Micro TF card, storage video and playback
video.
Potenza assorbita

This manual is suitable for various types of cameras
(The appearance may be different due to different batches, The
details are subiect to the receipt-This manual is only for the
installation instructions of this series of equipment)

Installazione e posizionamento

A1 Window Camera
1. Preparation: Make sure you have prepared this tile and the
supporting camera.
2. Porcelain tile installation: carefully tear off the centrifugal paper on
the surface of the porcelain tile, pay attention to avoid touching the
adhesive surface. Paste the porcelain tile in the appropriate position
of the window, make sure that it is firmly pasted and the surface is
flat. Make sure that the side of the tile with the magnetic ring is facing
towards the room when pasting.
3. Camera Connection: Take out the camera, put the side corresponding
to the magnetic ring close to the magnetic ring of the ceramic tile, and
complete the connection through magnetic adsorption. Ensure that the
camera is firmly installed and the position angle meets the requirements
di utilizzo.

Installazione dell'app

1. Download and Install: Download and install the
InstaVision app by scanning the QRcode for the Appl
Store or Google play Store.

2. Account Registration: Open the app and register a new
account or log in to an existing account.
5. Add Camera: Navigate to the Home Page within the app.
Locate and select “Add Camera” then go through preparation
instructions to power on your camera properly,

access, which is required for device discovery. Do not skip this step.Ensn
Bluetooth access is enabled as instructed, allowing the app to discover
device via BCE,
to cn SLsto=th
* If you can’t find the device in the above steps, press and hold tt
reset button for 5 seconds, restore the camera to factory settin
e riprova.
5. Connect to Wi-Fi: The app Will automatically scan for nearby
2.4 GHz & 5 GHz Wi-Fi routers.Choose your desired Wi-Fi
network from the list provided. Please double-check your
Camera’s capability in terms of 2.4 GHz & 5 GHZ.

A1 Camera use Instruction video

If you need further assistance, please contact our customer
support team. You can send an email or call customer service
through the “Contact Us” page within the app.
Thank you for choosing InstaVision App. We are committed to
providing the best user experience and security protection. If
you have any suggestions or feedback, please feel free to
contattaci.
Per ulteriore assistenza, contatta il nostro team di assistenza clienti:

Nota: questa apparecchiatura è stata testata ed è risultata conforme ai limiti
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
sono progettati per fornire una protezione ragionevole contro interferenze dannose
in un'installazione residenziale. Questa apparecchiatura genera, utilizza e può irradiare
energia a radiofrequenza e, se non installata e utilizzata in conformità con la
istruzioni, può causare interferenze dannose alle comunicazioni radio.
Tuttavia, non vi è alcuna garanzia che l'interferenza non si verificherà in un particolare
installazione. Se questa apparecchiatura causa interferenze dannose alla radio o
television reception, which can be determined by turning the equipment Off
e via, l'utente è incoraggiato a provare a correggere l'interferenza con uno o
più delle seguenti misure:
— Riorientare o riposizionare l'antenna ricevente.
— Aumentare la distanza tra l'apparecchiatura e il ricevitore.
— Connect the equipment into an outlet on o circuit different from that
a cui è collegato il ricevitore.
— Per assistenza, consultare il rivenditore o un tecnico radio/TV esperto.
Important: Change or modifications not expressly approved by the
il produttore responsabile della conformità potrebbe annullare l'autorità dell'utente a
azionare l'attrezzatura.
Questo dispositivo è conforme alla parte 15 delle norme FCC. Il funzionamento è
soggetto alle due condizioni seguenti:
(1) Questo dispositivo non può causare interferenze dannose e
(2) questo dispositivo deve accettare qualsiasi interferenza ricevuta, comprese le interferenze
che potrebbero causare un funzionamento indesiderato.